dodge

"06y Dodge Ram 1500 SLT 4.7l gasmanualy Got woke up yesterday to be told my father was stranded. Truck wouldn't start, at my sisters while he was picking up my nephew. Got there with some tools and first found burnt up/b\corroded wires on the starter. A quick trip to a parts store and I...

I've got somebody with a 06 commander 4.7, looking like a blown head gasket, #8 misfire, bubbles in radiator, etc 137k miles, debating between: 1) slamming gaskets in it, or 2) reman heads 3) junkyard engine with 6mo warranty 4) reman engine Thoughts and opinions? Do these heads survive an...

Need a little help where to get parts any advise on build. will be an economical rebuild. my first dodge. 81 dodge ram charger rumble bee. chrysler 9.25 ring and pinion toast, has been this way for a while, gear teeth in the oil.

What is a 1970 Barracuda, convertible, hemi, 4-speed standard, shaker hood, air conditioned, numbers matching worth?

Has anyone converted their 2nd gen D80 from a strap style yoke to a factory Ford companion flange? I’m considering a 1 piece 5” aluminum driveshaft for my ppump 98.5 instead of rebuilding the factory 2 piece shaft. From everything I’m seeing the seals, nuts and spline counts are all the same...

I don't know much about Dana 60's, having had Toyota axles for so long. I have a '83 Dodge kingpin Dana 60. It has the external mounting drive flanges, half the hub studs are broken off on each side. Dodge wheel hubs don't appear available and the Chevy style internal spline hubs seem...

I have read this possibility on various 'Yota specific forums, but I have never seen the evidence of it being done... UNTIL NOW! In addition to off-roading Toyota's, I also enjoy Ma Mopar's products. As I can't afford (read-cheap bastard) the good Toyota stuff, I have always been fascinated...

So I’m building an ext cab 69 c10 and I want a cummins in it. I found a 2001 24valve with an auto. I’m guessing 47re. Has anyone done a standalone on the factory harness to make this setup work? And any info or tips on where to start? Or, does anyone know of a stand-alone harness available...

Not new to winches (Winch's??:homer:) but looking to put one on my 08. I amalso going to swap out the entire bumper, I have a line on a warn 16.5Ti and would like it, but the google searching that I do comes up with some guys are having trouble fitting them in the diesels. Is there any truth...

​ So I've been thinking really hard about selling my 01 Ram 1500 RCSB Off-Road package and buying this 85 D250 to pull my 95 YJ around. My YJ is still a 2.5L with a D30/8.8 on 35's right now, might go to 37's eventually. So it is still fairly light. The 1500 will pull it, but it doesn't like...

Probably not the right forum to document this, but it's a huge problem in cold climates. Parts list ordered: Fox: 983-02-050 Front coil overs 985-24-032 Rear shocks General Spring: TTC-1210 rear coils. 25% more capacity coils for towing. Mopar: 52855789AB Spring isolators All going on...

It's got a pretty decent air compressor and a good size holding tank, any reason I shouldn't be using it for OBA other than the stock compressor costing ~$750 to replace?

​ Wanted to take our travel trailer and the side by side out, that and hate towing a trailer in the snow to my family's cabin which is 5-6 hours away... so I built this deck setup taking what i liked from the various ones I have seen on the internet. its built in 4 main parts and bolt...

Decided to start a build thread for my 03 Dodge Dakota. Story behind this truck, I had a decent Jeep XJ with a 4.7 stroker. It didn't fit 2 car seats very well. I found this truck at the end of my street for cheap with 107k miles. I have been building it for the last 2 years. Decided there is...

Alright, this thread won’t be a technical hard core build...yet. For now will be a bolt on assembling of aftermarket stuff. What it is: 2012 Ram 2500, 5.7 Hemi, with the 6 speed auto, Crew cab with 6’4” bed. 135,000 miles rolling on factory rims with wheel worn Cooper in 275/70/18. Plans: For...

Trying to sort out OD on the ramcharger I bought a while back because 4.56 gears and 35s don't play at freeway speeds with a 3 speed. When I bought the rig I was told by the PO that the trans was a 3speed plus electronic OD, but that the switch or a relay or something had gone out. He lived...

Recently got a 2005 Dodge Dakota 4.7l/6speed 4wd. It drove home fine, ran cool the entire way home approx 45 minutes of twisry turns and hills/mountains. It was low on coolant when I got it, prior owner claimed he just did the water pump and it had air still. He fired it up, I watched the...

I have a question for the old metal guys. We had to replace the turn signal switch in my sons 75 Power Wagon but now in having trouble getting the contacts to line up right. There are 4 brass terminals and 4 wire contacts that have to hit in a specific order for each function (brakes, hazzard...

So I have an 01 Ram with the 5.9 gasser and an automatic trans, I think it's a 46RE It's leaking fluid out the bellhousing I have read it's probably the pump seal so I ordered that, going to do new tranny lines while I'm at it. Does this all sound reasonable/possible? I haven't put it on a...

I have an '08 Ram 3500 CTD 4x4 with 35's and the 9.25 front axle. The rig currently has about 100k on the clock. A year or so ago I bought Timken unit bearings, Spicer life u-joints, and EMF ball joints with the intention of doing pre-emptive maintenance. Well, the maintenance never happened...