dodge

I’ve been trying to contact Dodge Off Road about an order I placed for almost a week now via email, their website messenger and phone. No one is answering or responding to the messages. Is this typical? Does anyone have another way to contact them?

https://raleigh.craigslist.org/cto/d/fuquay-varina-2000-dakota-quad-cab/7604688136.html This has been a planned project for some time. Needs a new home.

Bought a genuine POS for the engine. Want to get it running before I tear it apart. Was told replaced clutch and never ran since. 1997 dakota 5.2L 5spd 4x4 Fresh battery, It will crank all day. Gauges dont work, but all the idiot lights come on and off. After ~10 seconds the odometer starts...

.

Is there a year/make/model more preferable than another? To make stand alone and cooperate. Is tuning necessary if kept relatively stock. I really dont care if its obd 1/2, 318 or 360. Just wants something that's easy to prune, maintain with off the shelf parts, and runs well with a standard trans.

It’s time to fix this truck, again lol. The truck needs ball joints and probably a steering box, again. Circa 2013/14 I rebuilt everything on the front end. Here’s the list. Non- center axle disconnect front axle Synergy ball joints - have been a problem since install, I think they...

The wife is a fan of ramchargers, and wheeling, but her current ramcharger is a bit too nice to destroy out on the trail. So we went and found a crappy one to dump a bunch of money into. Plan started out as- Find a cheap one with a 435 trans, put super duty axles under it, make it run, put...

New guy here. Ill start of with what I got: 1999 Dodge Ram 1500 4x4 standard cab, 5' suspension lift and 3" body lift, stock axles and gearing, that I plan to do some rock crawling with (45 minutes from the Hammers, Big Bear and Calico) if that gives you any idea. I noticed the stock gas tank...

Found myself a 2 speed, but a good friend is looking for a 4 speed so figured I'd edit this instead of deleting. I think he would entertain about any ratio. Willing to pay shipping if the price works out. Jeff 530 592 6033

Been having problems with my parents '06 for better than 6 months. Started out with a purge valve code that ended up in replacing the TIPM then ECM. TIPM fixed a headlight issue, but not the purge valve. ECM fixed the purge valve, but caused the headlight issue to come back. Using the old TIPM...

So I have an 04 ram quad cab truck and the passenger rear door is being an ass hole. It went through a phase where it wouldn't open upon checking it out I decided to change the latch mechanism after I got the door open and realized it wasn't any of the linkage stuff. I was just out there...

I broke my own rules and got froggy with my tow rig over thanksgiving and came home with a lot of slop in the steering gear. I priced out a Borgson box and shaft @ $1300ish. I plan on keeping the truck forever but am still a tightwad. Help me spend my money and effort wisely. I have a spare box...

Anyone know if a 4th gen topper will fit a 3rd gen bed well? Mega cab, so short box. I'm guessing the tailgate seal may be the only issue. 4th gen toppers are so much more available at this point.

Has anyone put a v10 8.0 from a 2nd gen dodge in a ram charger I’ve been seeing a lot of 2nd get 2500’s for sale lately with v10’s some with 5speed manuals and some that are 4x4 1.Are the v10’s reliable and worth the swap I’m thinking about getting one in my town thats v10 5 speed and 4x4 and...

I have a 75 dodge ramcharger it was a mud truck in its past life. I want a rock crawler that can daily on the freeway! I’m looking for a 5 speed manual transmission that with bolt up to a mopar 360 small block with or without adapter preferably that will accept a np231 tcase I know the nv4500...

I have an 01 Ram 3500. I bought it with a bad trans. I bought an “425hp” kit from Power Driven Diesel. Seemed like it had a lot of parts to fix some of the major issues, but no billet shafts as I’m at the stock power level. I also added a low stall billet cover single disc converter from them...

Long post any help would be appreciated. Cliff notes: My question is at the bottom Backstory: My wife’s 2014 with the 3.6 v6 grand caravan is making a single popping noise when pulling out of the driveway (slight angle like all new homes) or when turning at a slow speed (pulling into a parking...

Don't know if Danny ever made it over here and don't really care. Glad to see someone is finally going after him Rutledge sues custom aftermarket vehicle parts business for violating trade practices act

I'm lazy, learn me. I had one years ago but didnt drive it enough for form an opinion. Found a clean '98 auto and debating on buying it, I dont need it but its clean. It's a gas dodge, it gets terrible mileage. What about the engine do I need to look for or be aware of?

Bought the above truck used with 19,000 miles on it. Came with a suspension lift and big tires and was set up for overloading with a tent on top and (rather nice) KC light bar slash cab rack. After we ge it home, dash lights and engine lights coming on. Stupid shit like throwing bad DEF sensor...