f250

Wasnt gonna do a build thread because I'm not doing much building just rebuilding/fixing. But I need a place to keep all the info. Ive put up a few pics/info in other areas but oh well. Its a 76 F250 that may grandfather bought new. He used it on his small farm. He had 2 sons that rode it hard...

Im starting a thread to track my build of my 79 Ford pickup aka Big Ugly. Its made from a few different trucks and needed/needs a lot of work.

I have a Con Truck lumber rack I saved from my 87 F250 standard cab that I now want to put on my 2002 F350 Crew Cab. I wasn’t aware that it wasn’t going to fit until I put it up there. It’s about 3” short of sitting on the bed rail in the front and the crossbar is sitting on the cab. A...

So I figure I'll add what I've done to my CrewCab here as I'm guessing there may be a good bit of info from everyone here on where I'm thinking of going next with it. Just as the Rona Plandemic hit I drove over to Cali from NM and purchased this thing. Here are a few pics of it from the...

I'm not even a 80-97 guy in the slightest bit, and it peaked my interest. 1997 F250 7.5L zf6 4x4 supercab short bed XLT. General abuse farm truck, but decent shape. If the deal goes through and I grow tired of it, pretty easy to unload to a OBS fanatic?

Anybody have any ideas for a quick fix? Sitting in a truck stop right now. Kicked on on I-81 and can't get over 60 MPH and if it down shifts it stays in the gear. Tried pulling battery cables and letting it sit for 10 minutes worked for about 5 minutes. Internet searches say everything from a...

Finally quit fucking around and tore the front end down on my 94 F250 to do ball joints, small lift, and alignment bushings. Doing a Zero Rate AAL pack, cut the old center pin out and it was tapered where it meets the beam. New center pins are not tapered. Assembled the new spring pack and...

Hey guys, I added a PSC ram assist to my D60 swapped 89 F-250 460. Im running 40's and a front spool. Figured it would help, But if anything it now feels worse. Steering wheel feels very tight and lagging. Only feels slightly better if i give it some RPMs. Im guessing its a lack of flow issue...

I went to look at a truck yesterday. It fired up first turn and drove great. The owner told me he was asking 8500 but to throw out an offer. It's not listed anywhere so he's had no other offers. It has surface rust in various places. Rust holes over the rear wheels and in the bottom of the...

Just did the rear pads and rotors on my '15 F250. Everything is buttoned up. But there's a LOT of slack in the parking brake cable now. Going to crawl back under there today to make sure the star adjusters are right. But the pedal for the parking brake goes half way down before it catches...

I have a 77 f150. Will F250 knuckles be a direct swap? I want to keep all the F150 parts except the knuckles. (Axles, Spindles, brakes, 78-79 steering). It does appear thay the tierod mount is a little higher on the F250 knuckles. hoping for a fast answer. I have a bent knuckle currently and...

I'm working with a guy who has a 2004 F250 and he's having some trouble with his ignition switch harness. does anyone know if there is any common things I should look for? we replaced the ignition switch but he's still having problems. It seems that when you manipulate the harness that we get...

https://offerup.com/item/detail/981126035/ Interested in this truck, havent looked at it yet. Googled, but didny see injector issue as a common problem on these. Something fixable? Just the bed is 2k, so it seems like a decent deal to me?

so I have a car right now.. which I have never taken down the 8-9 miles of gravel road leading up to the family ranch I spend like 1/3 of my time at the ranch.. but at some point I'm going to move to the ranch full-time.. I have discussed my thoughts on maybe a gladiator or bronco.. however I...

Since I just bought a suspension off a 2008 F250, what tools do I need to remove it? complete suspension removal, including frame brackets in front front and coil buckets. What's the common size bolt heads on these newer truck? I know I need a grinder and chisel/punch for rivets. No, I...

figured id add a quick build thread for my pos rig started as a $400 shit box that turned into a pretty good trail rig. then i got little crazy like normal and wanted to try racing it and well its pretty smashed up and not much longer for the world as have already started on its replacement...

Ongoing build of my 1972 Ford F-250 Explorer. I'm too lazy to provide full back history/thread re-hash so :flipoff2:. You can find what happened up to this point over at the old place. So a quick over view: Goals; Old school looking 4x4 with modern capabilities. Stock looking interior. Since...

Just looking for the important minor details of a sas on a ttb truck. 96 f250 Gas mt. 5.8l if it matteres. I have a bj d60 lined out The shackle rev will be used to gain the small lift wanted Ruffstuff/partmike steerinks to be assembled once axle is installed. Shocks and brake line will be...

Porting this over here, I figure I can not make progress on this site instead. :flipoff2: It will seem a little choppy since I wont be grabbing all the updates, just the important and current ones. I originally got part way into a buggy build and realized after getting married and buying a...

I'd like this thread to become the '05+ axle bible for tech and info. Since this is the next big project on my FSB... nOOB question: What do I need in order to swap a complete brake set up from an F-350 onto an F-550 axle? WEAVER FABRICATION has steering arms etc for the '05+ axles...