steering

Its on an F100, which from the factory have a rear steer spindle. I picked up a set of '70's E350 spindles (Front steer, 1' King Pin)....and am curious about what box this may be....so I can copy it :)

Radial Dynamics: Inline Finned Tube Cooler, 3 Howe: Howe 3 Anyone have expertise with these 2 steering coolers. They look similar but are priced quite different. Full Hydro set up, -8 lines Thanks!

Been having an issue with air in my hydro assist system. 94 YJ, 4.0, 1.75 PSC ram and PSC pump. 25oz baffled vented reservoir. Bled the system a ton. Drove it around town no problems. As soon as I took it wheeling it starting whining after the second trail. Got home , redid some of the hoses...

so i decided to upgrade to double ended ram this winter and i am also tired of slow steering. or no power to move my tires. that lead me on a search for a good pump to move fluid. then that lead me down the path of research, of course there are a bunch but one just stood out from the rest...

A friend of mine has a 2002 F-250 with a 6.0L Powerstroke on 2006 Superduty axles on 44 x 19.5. When we did the axle swap he also switched to full hydro steering with a 2x8 inch single ended ram. It has never been able to turn left, which is the weak direction on his ram. last we checked the ram...

1985 22RE with stock steering other than an IFS box and high steer. I’m on my 3rd pump and every one of them foam my fluid up, blow bubbles, and scream like a banshee when I’m turning. I’ve bled my system six ways from Sunday with no luck. It just keeps puking fluid out of the cap. Can a bad...

So I came across where they are installing a Toyota Prius :barf: electric power steering system into a Samurai. Has anyone on here done this and if so, how’s it holding up to off roading applications?

I burned up the power steering pump in my scout last weekend. I have a new pump sitting in a box I bought as a spare a while back, and was wondering how I can get more flow? Engine is just a 2003 5.3, and the pump is the same one that came with it from the junkyard plus a remote reservoir off of...

Swapping my 79 ford onto a 2006 Super Duty frame, details here: Buford 79 Ford My power steering to hydroboost lines are about 6" short, and I figured the best route was to just get the correct adapter from the Box, pump and hydroboost to JIC fitting and make my own lines, the idea being that...

Anyone add it to their atv or sxs before? Worth it? Use a kit? or OEM stuff? I see these kits and others advertised online. Hey looking for a Power Steering kit for your ATV or UTV? My son had been talking about this for a while. Seems like it is actually a pretty nice addition from...

Hey all, looking for a reference for steering gears, looking to do a set up kinda like the peck boys have done, outside the frame and a forward facing pitman arm... they used a bronco steering gear, but they're hard to come by it seems, so wondering what else may work in it's place. And most box...

Does anyone know where I can buy replacements? I lost one during a rebuild I did the other night and haven’t been able to find one. I might scrap the box and start with a new used junkyard unit if I can’t find them. Edit to include photo

Looking for a intermediate steering shaft for Gen2 4Runner really just need the splined section at the top of the shaft above the bellowed area.

Figured this belonged in the newb section. I haven't kept up with "best practices" on steering correction on non-crossover steer vehicles. I'm sure there's plenty of opinions on this but I'd like to see if there's a consensus. Wanting to go the best way on my budget '90 sub, but think this...

2010 JKR on unknown lift. Probably a rough country, 5.6-6" Had bent axles, took it to my trailer guy and he straightened the rear and put offset BJs in front. The axles are centered, and measure square. Toe reads a **** hair under 1/8. Castor on a printout reads 4.8 but my digital angle...

Figured I would post this for people trying to be cheap and use stock parts for their full hydro builds. I have a stock 4.0 WJ pump that is a brand new (not reman) that I bought from Rock auto. I have heard other people using this pump with their full hydro setups, so I bought one and now I'm...

I have a 3” body lift on my 99 dodge Ram 1500 which requires the use of a steering shaft extension. This was all installed by the previous owner. There is a lot of play (1/4”) coming from the steering box end of the extension. I can’t tell if if on the extension side or the input shaft from...

So I’ve a question that I can’t seem to find an answer to. The TG Power Flow steering box, does that actually mean anything or is that just marketing hype. Does it just mean it’s drilled and plumbed for hydro assist. Have they made the box more powerful? I have it now and I’m super happy with...

Been busy at work so no real building, but bench-building in my head. Before you tell me 'sirch newb' I have searched IBB and nothing has come up. I'm sure PBB has something, but it's such a dumpster fire for finding shit (or reading it) and perhaps there's new arguments pro/con for this. So...

putting a new ifs box on my samurai. When swapping my pitman arm, the flat one that I’ve been using had no alignment marks, bottom of sector shaft does. So I did my best guess to line up the pitman arm, and now the steering is off. It could also be off if my steering shaft is off a tooth as...