ford

Brand New Tires I mounted on ford 8 lug aluminum wheels. These wheels are from a 90's F250. Looking for $1000 for the set (I will lose my ass on this at that price, but my original use for them wont work). Located in SoCal. 661-524-3620

I'm getting out of the Ford I6 game as I've gravitated to smaller vehicles they just don't fit into over the years. Here's what I've got: Two "ran when pulled" EFI 300s one in longblock trim and one complete with accessories. Non-running industrial (too new to be forged crank) off an Onan...

I figured I might stop hijacking 2bb’s thead. 2022 Bronco Wildtrack. Has the bronco buster steering upgrades and a set of my own skid plates. Next mod is the last mod. I’m gonna leave some teaser photos for now and come back later to fill everyone in.

Got an 07. Did an injector. Got it started up after done, ran rough...figured was working air out of the oil rails. Then it died. It had a fuel knock while trying to start it again. Now nothing, just cranks. Both oil rails were off the truck. Put new (Amazon special) o-rings and Teflon...

Needing 1 99-04 Ford Unit bearing setup that has been bored out for 35 spline to carry as a trail spare. figured I'd see if someone had one laying around before ordering another one from Branik. Also looking for a single 35 spline stub to carry as a spare as well. Will need it shipped to 78418...

My Google FU isn't working. Only pulling up content w/ long deleted images or "just replace with a super duty console".. Need to R&R the cup holder/cubby in the OBS 40/20/40 jump seat. OBS was missing this piece when I bought it and I picked up this replacement yesterday. I can't figure it...

I thought I would just throw some truck porn up here. My sons both drive excursions. One with a V10 and one with a 6.0. The son with the 6.0 has spent a ton of money on the engine of course and is happy with it, but now his is a rust bucket with a dent or scrape in every panel. (he bought it...

I have a altec bucket lift on my Ford while I'm driving down the street the PTO is pushed down but on the way home sometimes the hydraulics will engage and I will have to shut the truck off to stop it after a while it stops happening until the next day or so what could it be?

someone's gotta have one kicking around...

Need to put a flatbed onto my f450 cab and chassis. Ideally want to use a reese or ford gooseneck prep, so I could use a B&W fifth wheel on both my f450 and f250. Problem is, the gooseneck prep mounts frame high, and flatbed will add probably 7" overall height, which I am thinking CAN be an...

I have a 1997 F250 351. At some point, somebody removed all the ac stuff: lines, compressor, condenser, etc. I also have 1995 F150 302 (that i bought to cab swap on another truck) that has most of the missing ac components. I want to get ac working in the '97 and send it down the road. Are...

Sold.

I have a ford 8.8 for sale along with brand new u bolts,spring perches and plates.661 578 3723. Located in 93255

I mentioned it elsewhere but the widow lady I do side work for has a F700 grain truck sitting behind the barn that she has given me. it's a 370 4V, 5 speed truck. 2 speed rear I believe. single axle truck. 16' grain bed on it. 4' metal grain sides and floor. She said there is no title for it...

Anyone else have an issue with orealy's turning service? I had them do a pair of sterlings, 3 1/2 shoes Numbnutz turned 2 13/16 of drum. Claims thats all the machine would do. I await the managers response :homer:

This post is several years in the making and I’m too excited not to share. Brothers and I scored a pallet of D0VE (knock off) heads that contains 15 D0VE’s and 4 ELIM 1 heads (whatever TF that is). Nothing is for sale, not sure yet if any of them are even usable. Just gotta share a pic with any...

Curious to see which EFI setup is the best bang for your buck for a SBF these days ! There are even more options now than the last time I looked a few years ago . Holley, edelbrock , fitech and I think summit or jegs has their own now . I have a like new 82 F100 flare side with the original...

Was coming down from Fresno and the heater vents started spewing smoke, pulled off the side of the road before the fire spread anywhere else, it went out right away. Truck is a 1991 F250 with a 5.8 and a 5 speed. Need some help identifying these hoses, and what exactly caused them to catch...

Been busy at work so no real building, but bench-building in my head. Before you tell me 'sirch newb' I have searched IBB and nothing has come up. I'm sure PBB has something, but it's such a dumpster fire for finding shit (or reading it) and perhaps there's new arguments pro/con for this. So...

I would like to add a second 'camper special' bed side tool box to the left side of my 72 pickup. If you have or know of someone who has a complete setup or a junk bed please let me know Part list: -door -hinges -latch assembly -liner -bed side sheet metal around door area to graft in. - lower...