ANGELO
Red Numb Skull
So my 351m said enough is enough of the milkshake oil multiple times or the holding the rpms in the red zone far to long at tittie lane at redneck yacht club and it is now knocking. I thought it loved it but i guess not..
IMG_20200118_140244 by Angelo Mehtala, on Flickr
vidya of the knock
PXL_20201109_161915629 by Angelo Mehtala, on Flickr
So i picked up a 460 for it about a month ago.
PXL_20201116_225257201 by Angelo Mehtala, on Flickr
I stripped it down today. Im looking for advice to build it. Im pretty sure its a low mile rv engine. it still has ford bearing, headgasket and cam. so im assuming the cross hatching is original.
Im planning gaskets, bearings, a cam, the weiland stealth intake it has now, fender exits. im thinking mad dog., and my quadrajunk carb thats on the modified.
Im not real sure on the rest. I want it to be reliable and run on regular gas. I want to build it for the most power I can get on affordable basic mods. I dont want to replace stuff just because.
At this level im sure my rods are fine. But my heads and pistons. Would it be worth it to change them? also what cam do you recommend?
PXL_20201211_155558667 by Angelo Mehtala, on Flickr
PXL_20201211_153231207 by Angelo Mehtala, on Flickr
PXL_20201211_153122175 by Angelo Mehtala, on Flickr
PXL_20201211_153113502 by Angelo Mehtala, on Flickr
PXL_20201211_153042812 by Angelo Mehtala, on Flickr
PXL_20201211_152005329 by Angelo Mehtala, on Flickr
PXL_20201116_200718951 by Angelo Mehtala, on Flickr
IMG_20200118_140244 by Angelo Mehtala, on Flickr
vidya of the knock
PXL_20201109_161915629 by Angelo Mehtala, on Flickr
So i picked up a 460 for it about a month ago.
PXL_20201116_225257201 by Angelo Mehtala, on Flickr
I stripped it down today. Im looking for advice to build it. Im pretty sure its a low mile rv engine. it still has ford bearing, headgasket and cam. so im assuming the cross hatching is original.
Im planning gaskets, bearings, a cam, the weiland stealth intake it has now, fender exits. im thinking mad dog., and my quadrajunk carb thats on the modified.
Im not real sure on the rest. I want it to be reliable and run on regular gas. I want to build it for the most power I can get on affordable basic mods. I dont want to replace stuff just because.
At this level im sure my rods are fine. But my heads and pistons. Would it be worth it to change them? also what cam do you recommend?
PXL_20201211_155558667 by Angelo Mehtala, on Flickr
PXL_20201211_153231207 by Angelo Mehtala, on Flickr
PXL_20201211_153122175 by Angelo Mehtala, on Flickr
PXL_20201211_153113502 by Angelo Mehtala, on Flickr
PXL_20201211_153042812 by Angelo Mehtala, on Flickr
PXL_20201211_152005329 by Angelo Mehtala, on Flickr
PXL_20201116_200718951 by Angelo Mehtala, on Flickr