reptillikus
ate lug
IIRC yes, but it's been a year or so and apparently I didn't take any pics of mine to compare against
They have different weights depending on the year of the crank correct?
Engine is in to confirm everything fits.
But it's some industrial flywheel that's like 2" to big..
Planned on it. Truck has a snorkel.You're not going to run that carb hat agian are you? Those things do horrible things to the jetting at higher RPM's.
Thank youCorrect on the heater hose routing, you'll want a 90 off the intake.
YesMy coolant hoses go like this correct?
ExplainYou're not going to run that carb hat agian are you? Those things do horrible things to the jetting at higher RPM's.
They cause horrible turbulence over the top of the carb that fucks with the high speed air bleeds. The mixture will swing all over the place.Explain
Shouldn't you be able to get over that by running a smaller CFM carb so that the air is rocketing through at a higher constant speed regarldess of what the shit in front of it is doing?They cause horrible turbulence over the top of the carb that fucks with the high speed air bleeds. The mixture will swing all over the place.
No. It's the sharp turn and all the air coming in from 1 direction. The larger dual inlet ones from UMP are better but still not as good as a 14" round filter.Shouldn't you be able to get over that by running a smaller CFM carb so that the air is rocketing through at a higher constant speed regarldess of what the shit in front of it is doing?
awesomeFires it up last night to break it in. No leaks. Everything seems to have went smoothly. I did burn all the expensive paint off the headers though