Slander
Team no stickys
thezentree I also used this video to get the frame measurements, was very helpful.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
-
Check out our new Group Buy Program! We're kicking it off with Baja Designs! $10 Flat rate shipping no matter how much you order!
thezentree
Well-known member
- Joined
- Jul 21, 2023
- Member Number
- 6633
- Messages
- 157
Right on, thanks.
Slander
Team no stickys
Pulled the front axle out last night:
Going to RR the front axle while it's out/when I do the 5th stud to it.
Glad to see this big bastard that got in the way of everything finally going bye bye
Plan is to spin the rear leaf hangars around and that will push the front axle 4.5" forward and give me uptravel. Going to notch the frame and swap in an IFS box with hydro assist. Also plan on moving the airbumps.
I didn't do much else last night, just laid under it with a flashlight looking for broken stuff and measuring. Everything looks good!!
Going to RR the front axle while it's out/when I do the 5th stud to it.
Glad to see this big bastard that got in the way of everything finally going bye bye
Plan is to spin the rear leaf hangars around and that will push the front axle 4.5" forward and give me uptravel. Going to notch the frame and swap in an IFS box with hydro assist. Also plan on moving the airbumps.
I didn't do much else last night, just laid under it with a flashlight looking for broken stuff and measuring. Everything looks good!!
ridered3
Low Talent Wheelin
Slander
Team no stickys
It pretty much did!! Took me like an hour and most of that was drinking coffee while the compressor ran
FleshEater
Ordinary Average Guy
So no links? Thought that was the plan?
Slander
Team no stickys
Plan changed. Just doing the quick and easy to fix some stuff that has annoyed me and to get it ready to wheel again in a couple months. It needs a cage before links, I'll probably buy a bender in the summer and start messing with that.
Slander
Team no stickys
I should! I have roughly the same as Connor, and he's got one on there. I narrowed it when I did the chop, I am kind of worried about box to radiator clearance, but I'll cross that bridge when I come to it.
Slander
Team no stickys
That big bastard got in the way of everything, and there as no way to get my axle in the right spot with where it was.
rockota
white collar hillbilly
- Joined
- May 28, 2020
- Member Number
- 1642
- Messages
- 3,943
You’re going to have to move a rear swing ~16”+ farther forward than that box. Way into the core support and front body mount… and at 4.5” forward on the axle centerline, probably will have to rebuild all that crap.
Not sure how that’s going to work. It’ll be way easier to package a forward swing…
Slander
Team no stickys
So I'll have to do what 98% of every solid axle swapped Tacoma or 4runner has to do, sounds insurmountable...
rockota
white collar hillbilly
- Joined
- May 28, 2020
- Member Number
- 1642
- Messages
- 3,943
So I'll have to do what 98% of every solid axle swapped Tacoma or 4runner has to do, sounds insurmountable...
If your friends told you to jump off a bridge… would you do it?
Forward swing will be way easier to package. And it has a much better feel than the oscillation of the rear swing/forward steering arm.
It’s the one thing I wish I had done different when I upgraded to the 4WU system.
I’d get your axle set… then see what fits. I bet the current box will be easier than ifs.
Slander
Team no stickys
That box is like 2x's bigger than the IFS box and sits right where the shocks and bump stops are supposed to go and the tie rod smacks right into the pitman arm, maybe if I found one of the 3 unicorn smaller forward swing boxes that haven't been made in 30yrs it would work!If your friends told you to jump off a bridge… would you do it?
Forward swing will be way easier to package. And it has a much better feel than the oscillation of the rear swing/forward steering arm.
It’s the one thing I wish I had done different when I upgraded to the 4WU system.
I’d get your axle set… then see what fits. I bet the current box will be easier than ifs.
I have been working around that big bastard since 2016, does it have some ok features, sure, but slapping a smaller box further forward opens more options up for me. I would like to do what Malburg114 did and put a inside the frame rail box on it, but that is a pretty large can of worms that I don't feel like opening.Snowy
Well-known member
I’d think as long as you’re pushing the shackle hanger forward with the whole axle shift, I’d think you’re fine chopping out the body mount that’s already cracked and broken on pretty much all Tacomas. I had to trim the radiator bracket to fit the box too so pretty much everything floats a little on the left front aside from my battery support bracket.
Plus fitting coilovers, bumps, and shock towers down the line with links will be a way bigger pain in the ass with a forward swing box than cutting some core support tin.
Slander
Team no stickys
Yea that's my thinking. It's all fucked up, broken and falling apart anyway and has to be addressed, just chop it out and make a new body mount up there. Good part is I don't have to worry about the battery up there anymore falling through the fender.
Slander
Team no stickys
I already have a tapped IFS box for one and 2 they are a pain in the ass to find. I have enough niche land cruiser shit on this truck already, I don't need any more lol!!
94toytruck
Eastcoast crawler
Man when my friend still had his old shop open he had a customer that insisted on running one of the ford boxes he bought from PSC with all bling stuff on it. The Tacoma was linked and the box just took up a huge amount of space. Everyone on the net kept telling the guy how great it that box was and the guy had no clue about anything. It took him actually going to the shop and seeing it mocked up with both the Ford and IFS boxes till he said do the IFS box. It's been years since I heard anything of the truck but as I recall it never had issues with the IFS box.
Damn now I kind of remember how much BS and drama surrounded that build
Damn now I kind of remember how much BS and drama surrounded that build
Slander
Team no stickys
Sounds about rightMan when my friend still had his old shop open he had a customer that insisted on running one of the ford boxes he bought from PSC with all bling stuff on it. The Tacoma was linked and the box just took up a huge amount of space. Everyone on the net kept telling the guy how great it that box was and the guy had no clue about anything. It took him actually going to the shop and seeing it mocked up with both the Ford and IFS boxes till he said do the IFS box. It's been years since I heard anything of the truck but as I recall it never had issues with the IFS box.
Damn now I kind of remember how much BS and drama surrounded that build
YotaAtieToo
Thick skull
When I sas'd my 4runner, I had an FJ80 and ifs box to mock up. Even the small FJ80 box just didn't fit well. Like slander said, it's right where the shocks need to be and you end up with the tie rod hitting the pitman arm.
I ended up selling the FJ80 and using the it's box. My axle wasn't super far forward, but it was enough that 42 pitbulls barely rubbed the tubbed firewall. Box was just up against the core support. It was a 90, not 96+ but I don't think they're that different?
I ended up selling the FJ80 and using the it's box. My axle wasn't super far forward, but it was enough that 42 pitbulls barely rubbed the tubbed firewall. Box was just up against the core support. It was a 90, not 96+ but I don't think they're that different?
Last edited:
chaplinfj60
Well-known member
you talking about one long weekend max.
remember we do all this because we think it it will be easy.
Slander
Team no stickys
you talking about one long weekend max.
remember we do all this because we think it it will be easy.
Yea ok.....
Again the main objectives of this work: push the front axle forward to get uptravel, fix the steering, fix anything I find broken before April so I can wheel it again. Linking a street driven truck isn't "one weekend max" working solo in a garage never having done it before, oh and waiting for 5months for coilovers to show up from China cough chays cough
Last edited:
chaplinfj60
Well-known member
chaplinfj60
Well-known member
what size?
tons of sizes, all the Fox factory race series shocks are on sale since they are coming out with new skus and cerakoted bodies. I will PM you a link
Slander you can get a pair of Fox 2.0x14 remote resis with Eibach springs for $1036.32 to your door. The johnny joint kits with weld bungs are $405 for 6 kits. All you would need after that is link brackets from Ruffstuff, you already have the box and air bumps