jeep

  1. HRDROKN

    Well here I go again.... rear stretch.

    My plan at the moment is very fluid, just have to get it done for some late mid season trails.... Plans? Ditching the Genright fuel tank and going with a RCI or similar recessed thru the floor. Back half kit, Motobilt was on sale... I missed it. Still leaning this direction to match my...
  2. RustyC

    My Last Jeep.

    Yep I think this one will be my Last Jeep, or at least a build thread for it. I've built a couple of rigs up to this point and I think I know what I want for this one. I will turn 50 the summer of 24 and hope to have it driving by then. Build specs (subject to change) 2005 Jeep LJ 250K miles...
  3. 2011 Jeep Wrangler JKU 3.8 RLE450

    OK... Posting for a friend. Sounds like his engine is toast. To hear him tell it he was driving home and noticed a lack of power, then on Friday it sounds like he has a piston hitting a valve, or some other kind of mechanical interference. Overall it is in what I consider good condition, well...
  4. 67StingrayJ

    NM GenRight Gas Tank Jeep

    Extending the feelers on this GenRight Gas Tank. Might go to a fuel cell. I think it is a 26 gal based on GenRight dimensions. Can we ask for trades? Thinking $1500 is fare. I'm in Las Cruces New Mexico. The closest major city is El Paso Texas. Message me and we can discuss...
  5. Clb

    Old willys thread on old place

    Who pucked up a flatfender wagoneer 3/4section in napa ca. Round 10 years ago?
  6. Clb

    When is enough enough?

    In light of craptslers murdering of willys overland's rep... Discuss:usa: Guess I failed to get the link in here... https://irate4x4.com/threads/installing-a-used-1-4million-mile-transmission.395258/
  7. Weasel

    Alternator

    Need a replacement on the Cherokee. Anyone tried any of the "made is the US" brands and had good luck? Ran across a few on the webs this afternoon: DB Alternator - DB Electrical Alternator - UPGRADE - NEW! JS Alternator Mech Man - 240 amp alternator for Jeep Cherokee XJ Power Bastards - these...
  8. houstoniancj

    Need help with a built Jeep and putting a price tag on it

    Experts :flipoff2: Need help with putting a market price on a built LJ as our lifestyle is changing and I don't have the time to run this as much as i would like. Now that we are larger property owners a side by side make more sense, especially with the kids. I have gone through the classifieds...
  9. Frenched shock towers

    Hey all, looking to outboard the rear shocks on my yj, stretched 6 inches in the rear and 2 in the front with motobilt stuff, but I'm not running full width axles, so wouldn't have room to run the shocks up to the inner fenders and cage and not hit the tires flexing. Would it be a bad idea to...
  10. Rear 4 link frame mounts

    I have a Clayton 4 link setup the lower links drag on everything. I want to move the lower frame links up on the outside of the frame I just haven’t seen it done. Is this an issue
  11. Installing a used 1/4million mile transmission....

    Thumper's('02 Jeep WJ, 4.0l, 42re, nv242) transmission decided to take a dump last week. My daily driver and only vehicle. I don't have a press(no space for one either), so a DIY rebuild isn't an option, and the budget isn't there for a shop to rebuilt it. In regards to a press, I'll be looking...
  12. surpip

    Possible first jeep

    My girl got a new job and we’ve been discussing getting either a JKU or JLU, trying to stay around 30k, would prefer tons already done but not required. Years to stay away from?
  13. HRDROKN

    Front axle stretch...

    Can I move the steering box forward to make room for a front stretch? YJ on a 3 link coilovers... hydro assist. Is 4" possible?
  14. LJ Slider Removal

    Got a stupid question. How do I remove my old Poison Spider Rocker knockers that my dumb ass siliconed on over 10 years ago? All the bolts are removed and weight is off the body mounts. How do I get the silicone to release without totally screwing up the body. Thanks.
  15. TRINDU

    Why are my waggy/J10 springs different

    Everything I've read, and remember from 15 years ago, they should be the same. Wanted to run these springs all around on my YJ, but need help sorting out what I have. J10 are all around thicker, less arch, and have different eyes than the waggy. Short of throwing them on and seeingwhat...
  16. Reno Off-Road (Parts)

    Jeep® JKU Tonneau Cover | 2007-2018 4 Door

    This might not be an Irate hardcore style product, but I am sure it is one that many can use. Even if you have a grocery getter too. 𝗚𝗼𝘁 𝗮 𝗝𝗲𝗲𝗽 𝗝𝗞𝗨? 𝗡𝗲𝗲𝗱 𝗮 𝘀𝗼𝗹𝘂𝘁𝗶𝗼𝗻 𝗳𝗼𝗿 𝗸𝗲𝗲𝗽𝗶𝗻𝗴 𝘆𝗼𝘂𝗿 𝗴𝗲𝗮𝗿, 𝗼𝗿 𝗯𝗲𝗹𝗼𝗻𝗴𝗶𝗻𝗴 𝗰𝗹𝗲𝗮𝗻 𝗮𝗻𝗱 𝗱𝗿𝘆 𝗶𝗻𝘀𝗶𝗱𝗲 𝘆𝗼𝘂𝗿 𝗝𝗲𝗲𝗽? Check out our Tonneau covers. Multiple color options. Made w...
  17. Clb

    Todays flatfender "whatzit"

    Identify it, pay freight and its yours...
  18. Lilyota

    Price Check Please

    AX15. Not really sure how many miles, it doesn't feel like what's actually on the odometer.
  19. Redwagon

    3.6l head gaskets

    anybody done these? am I getting in over my head? 2012 Jeep JKU 3.6L Pentastar - exhaust in the coolant, oil is clean and minimum steam out of tailpipe. Ideas?
  20. NP231j input shaft swap

    I have a 4l60 transmission and a np231j transfer case with a sye and also a np246c transfer case to use for parts. my plan is to swap the 246 input shaft to my np231j so it will spline to the 4l60 trans. I have read that there is a clocking issue, is this true. also are there any other problems...
Top Back Refresh