Rear 4 link frame mounts

[David]

I have a Clayton 4 link setup the lower links drag on everything. I want to move the lower frame links up on the outside of the frame I just haven’t seen it done. Is this an issue

 

[David]

I have a Clayton 4 link setup the lower links drag on everything. I want to move the lower frame links up on the outside of the frame I just haven’t seen it done. Is this an issue

 

[06h3]

It will make your anti squat higher which will cause your rear end to lift on acceleration if your over 100% anti squat which I assume you will be

 

[Halffastford]

Would be easier to build a slope on the leading edge of those rear links and the trailing edge of the bottom front links. At least you'll maintain your geometry.

 

[Treefrog]

The links are already rather close in that setup. Raising the frame end of the lower links is going to be getting into radius anti behavior pretty quick.

Adding a slope to the mount as mentioned above is a much better solution.

 

[JohnnyJ]

It'll look like a monkey humping a football on climbs if you build what you suggest.

 

[David]

I am going to stretch the rear 4 inches. And redo the brackets I plan on moving the upper triangulated brackets up to maintain the geometry. Or another way ic to start from scratch and do double triangulated