Introductions

[bobbywalter]

Lil Bob starting to take over wrecking **** duties.

 

[aamir567]

Ford gpw 1942

 

[rattle_snake]

Current money pit. Doesn't start, run, stop or steer yet.

 

[SLOWPOKE693]

Current money pit. Doesn't start, run, stop or steer yet.

Very nice. Is there a build thread on this truck?

 

[rattle_snake]

Very nice. Is there a build thread on this truck?

On 'another site', going to start/continue one on here shortly

 

[CDA 455 II]

On 'another site', going to start/continue one on here shortly

When you can; can you measure the height of the bottom of the door sill?

I'm curious.
I'm right in the middle of a 1ton rear swap with 6" lift on my '94 Bronco.

My bottom door sill sits at 29".

 

[rattle_snake]

When you can; can you measure the height of the bottom of the door sill?

I'm curious.
I'm right in the middle of a 1ton rear swap with 6" lift on my '94 Bronco.

My bottom door sill sits at 29".

It's at 33", but w/o the rest of body the chassis is sitting up about 2" above expected ride height.

 

[Snowracer]

figured it was time to make my way over here and check things out. some might know my turd of a build

 

[CDA 455 II]

figured it was time to make my way over here and check things out. some might know my turd of a build

Waaasssuuuuuuuuuuuuuuuuuuuuuupp?!!1!

 

[1sicbronconut]

Lots of Ford junk at my house, The Bronco/buggy/ftoy has been a ongoing project for 10+ years a major move, three shoulder surgeries, and a back surgery has made it take way to long to finish. The black Bronco is my light duty trail rig, and the 92' Explorer is being built to tow behind my class A motorhome. I'm currently most of my time on the Exploder just but a manual t-case in last weekend and have front/rear diff''s built with 4.56 gears, LS for the rear and power trax for the front also have a 5.5"x5 conversion all set up for it.

 

[KitchnRaider]

My current ford. bought it as a 76 f250 390/auto 2wd camper special off the original owner with 48000 miles. after getting it back on the road and driving it for a couple years, I body swapped it onto a solid 77.5-79 F250 4wd frame. 300 six, zf, 205, 4.10 dana 60s. At first I ran super stiff lift springs and 36" tsls. Eventually installed superduty front leafs and 255/85R16 Toyo M55s. needs to be finished out, but is a great driver and gravel road cruiser.

 

[Proeliator]

Doom be you......dooooom I say.

I've known him damn near twenty years....at least as a fake internet friend. Good to see him on board. But, he still owes me beer. :D

 

[bobbywalter]

I've known him damn near twenty years....at least as a fake internet friend. Good to see him on board. But, he still owes me beer. :D

We all owe you beer. Satan. All hail Satan. 666.

 

[Levigarrett76]

I've known him damn near twenty years....at least as a fake internet friend. Good to see him on board. But, he still owes me beer. :D

Agreed. Long time coming.🍻

Holy **** I think its actually been 21-22 yrs

 

[Budone]

How do all.
I was a sub 10k member of the other board. Been lurking and absorbing useful info for a long time and will likely continue the trend. Rig is a 70 Bronco I've had since 95. First pic is from 2001 at the ill fated Paragon ( I miss that place). Second is a couple years years ago here in Michigan. Very little has changed. Hell, that's even the same tires!
Started collecting parts for the next round of upgrades and look forward to getting to it. Also have a swb 79 F350. It's my gofer rig that will eventually donate its front D60 to the Bronco. ​

Wes.


​​ ​​​

 

[Tim C]

Here's mine. 78 f150 I saved from the crusher. It needed a clutch but was rusted terribly. I originally started out with a homemade wooden long flat bed, but as I've hit harder trails in the southeast I've shortened it. 351m with TBI, 435 4 speed, 203/205 doubler, d60/14b rear 4 linked coilovers, front 6" superflex springs and long arms. I went by poweratroketim on the other site, but got a new name here that matches most other forums I'm on.

 

[Bigblue 94]

Sliding in sideways from FSB...

want pics of all the fords? Okay...

85 bronco, built 309" inline six, np435, np208, 4.56 gears, detroit in the 8.8 and a TT in the front, 37s, lots of other mods...

96 F350 351w, c6 (swapping a set in), bw4407, 4.10s, 35s

08 F250 5.4, zf6, 4.10s, 35s

99 E250 DD 4.2 v6, 4r70, 3.73, 32" swampers getting installed today

Plus a non running 78 F150 ranger. 351m, np435, np205

and an 88 F250 crawer project truck, an 02 explorer sport, and a totaled 03 mach1 mustang.

 

[MS88Bronc]

Howdy folks - here's my '96: 5.8L, E4OD, BW1356 with Detroit locked Dana 44 TTB and LS 8.8 rear with 4.56 gears in both. It's on a 5.5" Superflex lift with Bilstein 5100 shocks and 35" Cooper Evolution M/T tires. It has Mastercraft suspension front seats, Saginaw upgraded PS pump with BlueTop 4-bolt steering gear, custom fabbed front and rear off-road bumpers with 12000# Badlands winch with in-cab controls in front and swing out tire carrier out back, custom built rock slider/side steps, roof rack, and too many other little mods to mention. Some of you Bronco guys may know me already....

 

[CDA 455 II]

Howdy folks - here's my '96: 5.8L, E4OD, BW1356 with Detroit locked Dana 44 TTB and LS 8.8 rear with 4.56 gears in both. It's on a 5.5" Superflex lift with Bilstein 5100 shocks and 35" Cooper Evolution M/T tires. It has Mastercraft suspension front seats, Saginaw upgraded PS pump with BlueTop 4-bolt steering gear, custom fabbed front and rear off-road bumpers with 12000# Badlands winch with in-cab controls in front and swing out tire carrier out back, custom built rock slider/side steps, roof rack, and too many other little mods to mention. Some of you Bronco guys may know me already....

Waaasssuuuuuuuuuuuuuuuuuuuuuuup?!!

 

[MS88Bronc]

Waaasssuuuuuuuuuuuuuuuuuuuuuuup?!!

Yo CDA lol!

 

[WaterH]

Nice to see FSB guys moving over. I really liked that site before vertical scope took over. I'd like to see the guys from 4BT Swaps too.

 

[Bigblue 94]

Nice to see FSB guys moving over. I really liked that site before vertical scope took over. I'd like to see the guys from 4BT Swaps too.

Didn't know about it until today. Ill still be over there too, but its nice to see some old faces, er, names and rigs. And the mutherfu€#in smilies!

 

[67galax]

Seeing several FSB guys on here, so here’s my collection (2) of 1996 full-size fords

 

[CDA 455 II]

Seeing several FSB guys on here, so here’s my collection (2) of 1996 full-size fords

 

[Levigarrett76]

agree good to see fsb guys on board, makes me wonder about supermotors, makes me think of all that stands to be lost if they pull a photobucket, look at steve83 info

 

[CDA 455 II]

agree good to see fsb guys on board, makes me wonder about supermotors, makes me think of all that stands to be lost if they pull a photobucket, look at steve83 info

Wat up. Homie?!



Steve83 was/is a complete library of FSB knowledge.

 

[Bigblue 94]

agree good to see fsb guys on board, makes me wonder about supermotors, makes me think of all that stands to be lost if they pull a photobucket, look at steve83 info

As far as I know, supermotors is not changing, other than working on a new/upgraded server. I have a contact that is in direct contact with the owner of SM.

 

[Levigarrett76]

awesome, i was hoping that was the case, thanks for the info

 

[F***roads]

New to this site, same username from (p) irate. Trying to figure this out. 04 f150 SAS on super duty tons. 37" stock 3.73s hahah. Hello ford peeps

 

[JoshTurner]

Still Rocking these 3... 90 4 door Bronco.. 1 of 35 made by DaBryan Coachworks & 1 of 2 we know are still around... The 79 Bronco that was in he 98 TTC & my trail truck narrowed front end...