Introductions

[Bigblue 94]

Still Rocking these 3... 90 4 door Bronco.. 1 of 35 made by DaBryan Coachworks & 1 of 2 we know are still around... The 79 Bronco that was in he 98 TTC & my trail truck narrowed front end...

The narrowed trail truck looks like an ol Edsal with the small grille. Nice work

 

[JoshTurner]

The narrowed trail truck looks like an ol Edsal with the small grille. Nice work

Thanks... 6 inches added to the fenders… Did it all with no measuring & kept all the body lines

 

[Loki89t]

Finally came over and joined up here, lurked on the other site for a long time. Never had anything I thought was cool enough to post. Maybe one day I'll start a build thread when I get time and money to actually start doing more to my truck.

'78 F250 460/C6, Skyjacker Lift, 37 General X3's on H2 wheels. Fitech injection, fuel system re-done with an in tank pump. Lots more planned, hopefully start on some of it soon.

 

[planefixer]

My '68 Bronco. Granddad bought it new in Oct. 1967.
Pretty much stock other than it has a 325-ish HP 302 under the hood. I'm planning on eventually doing a body off restomod build for it.

 

[landen300]

I moved over from pirate as well, same user name.
Right now my wheeler is an 86 F-350 chassis cab that's been shortened.
460, T19, 1345, D60/10.25 Locked/Welded on 39.5 TSL boggers, H1's, front/rear winches
Nothing special, but is inexpensive and capable enough.

 

[I Bleed Blue]

Always been a ford guy and currently rocking my 96 PSD F250 - your basic 7.3 upgrades lifted on Raceline's, and my 89 f150 crawler build found here -> (https://irate4x4.com/ford/108362-89-...ize-on-wontons)

 

[FleshEater]

Just bought a 1984 Ford Bronco. I've owned a couple Fords, but they were just DD's that I never messed around with. Man, this is like learning a lot of stuff all over again. I got questions that are too pussy for Irate standards, so reading through a ton of threads with people bitching and whining about pulling A/C systems out, removing emissions stuff, etcetera. So...definitely a sweet ride, a good project, but fuck Photobucket for deleting fucking photos!

Pics coming from phone...

 

[CDA 455 II]

Just bought a 1984 Ford Bronco. I've owned a couple Fords, but they were just DD's that I never messed around with. Man, this is like learning a lot of stuff all over again. I got questions that are too pussy for Irate standards, so reading through a ton of threads with people bitching and whining about pulling A/C systems out, removing emissions stuff, etcetera. So...definitely a sweet ride, a good project, but fuck Photobucket for deleting fucking photos!

Pics coming from phone...

/
Damn; that's a clean Bronco!

 

[FleshEater]

/
Damn; that's a clean Bronco!

Thanks, man! I started a thread on it in the Other Builds section. This is basically just going to be damn near bone stock. It's too clean for Pennsylvania to molest it.

 

[WaterH]

Thanks, man! I started a thread on it in the Other Builds section. This is basically just going to be damn near bone stock. It's too clean for Pennsylvania to molest it.

That is nice. Please put some bigger tires on it though. Not crazy, but at least 33's.

 

[MotoFreak405]

New to the Forum. Stalked Pirate for years, but just learned about this site🤘🏻. Here’s my 1979 f250 on a Dana 60/Sterling 10.25 combo, 203/205 doubler and a 460 with a 4spd

 

['84 Bronco II]

New to the Forum. Stalked Pirate for years, but just learned about this site🤘🏻. Here’s my 1979 f250 on a Dana 60/Sterling 10.25 combo, 203/205 doubler and a 460 with a 4spd

I am surprised how little frame flex that dentside has. I didn't realize that they were so much stiffer than the '80-'97 trucks

 

[Loki89t]

New to the Forum. Stalked Pirate for years, but just learned about this site🤘🏻. Here’s my 1979 f250 on a Dana 60/Sterling 10.25 combo, 203/205 doubler and a 460 with a 4spd

I want a crew cab so bad.

 

[Tater]

Here is my hunk of junk! Started out as bronco II. Tube chassis truggy with 3’ of bronco II frame. 4.0ohv propane turbo, M5od 1350/1354 doubler. D44/9” 39.5 iroks.

 

[dignifiedWT]

Howdy folks. Happened upon this site recently. Was a long time lurker of PBB for many years. It's refreshing to see all the familiar faces posting on a decent forum once again! Here's a couple pics of my stuff.

 

[BambiBasher]

Guess I’ll introduce myself a little bit. Lurked on pirate for a long time. Fell out of wheeling for about 8 years now. Finally getting the itch to get back to it. Last iteration of my rig was a healthy BBF with a RMVB C6 and a 205 case. Had 44/9” with 4.56 gears and Detroit’s. It was a super fun setup but this time it’s going to be much more capable. Kept snapping axle shafts and driveshafts. Sticking with a BBF but undecided if I want an auto or jump to stick. D60 and a sterling with 4 link front and rear on 44’s. Pics are from its last configuration and how it sits currently.

 

[Firetwig]

Occasionally post on FSB, full time lurker on Pirate for....16 years?! Damn im getting old.

I remember you from FSB. It's nice to see familiar faces/names on here. I was a teenager back then with the idea that lights and wheels made a build.. haha. (AndrewJames)


Edit: Nothing special, 79 F150 with factory EFI 4.8/4L60E. Factory D44/9inch with Chromos and 5.13s. Yukon Grizzly rear, Eaton E-Locker front.

 

[Levigarrett76]

got a picture under the hood?

 

[Firetwig]

got a picture under the hood?

I can get some. Anything particular under there you're interested in?

 

[Firetwig]

[No message]

 

[Firetwig]

I just snapped these real quick at work. First time I had driven in it in a month or so. Drives and runs good like this. Still have a little tidying up under hood I would like to do.

 

[Levigarrett76]

thankyou for sharing

 

[TFP]

This is my shit pile.

 

[CDA 455 II]

I remember you from FSB. It's nice to see familiar faces/names on here. I was a teenager back then with the idea that lights and wheels made a build.. haha. (AndrewJames)


Edit: Nothing special, 79 F150 with factory EFI 4.8/4L60E. Factory D44/9inch with Chromos and 5.13s. Yukon Grizzly rear, Eaton E-Locker front.

Nice 'guardsman blue' cattle guard.

 

[Projectjunkie]

I've got a pos 89ranger 1wd

a 90 BII shell 4L 8.8 and frame
Currently slapping a fwd continental drivetrain in the back of a previously doodlebugged A

Where are you at on the doodlebug? I'd really like to see some pics

 

[Projectjunkie]

Some of my past rigs, I put 12v Cummins engines in the highboy and white crew, then sold them both, the pics are from the buyers in ca and Texas, the blue short bed was because I regretted selling the others. Then i sold it, haha

The tan 79 is my next build, likely keeping it low key, factory a.c. truck, the new guts are on the trailer, an efi351 that's going to get a 2bbl, a C6/1356 combo and a pair of 05 sd diffs, going to get 315s and be my Friday night cowboy Cadillac

The 67 ranchero is one we did for my grandfather, a 20 footer driver with a 289/c4, but it's a cool car

I'll dig up pics of the EBs I've passed on to new owners

 

[Thatg9659]

Where are you at on the doodlebug? I'd really like to see some pics

Same place I was before it got too cold to work on it outside. Everything’s just kinda there. Should take a week of my 2 weeks left off and at least get it off jack stands and rolling. I should start a thread so You guys can nag me to finish it.

 

[h0trod]

introductions eay?
names Brian from the bay area CA
got a bunch of oddball projects.
but heres what i wheel, and what the family will be wheelin soon, hopefully

 

[Prizefighter]

My hauler - 1994 F-350 4x4 CC longbed

Project - 1977 F-150 on SD tons 460/NP435/NP205

 

[fordpickupman]

I used to love it over on Pirate. LagunaMS told me about this place. It reminds me of the old Pirate.
‘71 F250 Fummins
‘96 F350 Fummins
‘94 sploder beater 4.88s locked front n rear custom long travel suspension
‘01 sploder 5.0 mama’s stomper