-
Last Call Guest on these Group Buy Deal Items from Baja Designs
-
We're moving data around, images may be off/on over the next few hours. Nothing is lost aaand no ... Nothing will Change Fo2
Pics of me towing stuff
- Thread starter YotaAtieToo
- Start date
Wades_76_cj7
Name is Wade, but your mom calls me Daddy.
Don't think I have ever seen a camper/horse trailer with the doors opposite of the curb.Marketplace obsession got me a good one. Picked up a crawler hauler yesterday. Trails West 3 horse slant converted to a 14’ flatbed. Loaded up and ran up to the scales today.
Some friends have a 3 horse slant w/ living quarters they haul their RZR in. It's tight but they make it work. the angled wall makes it a little more cramped in the living quarters but the trailer is built much heavier than a regular toyhauler/rv.
Mvanhelden
26 Wheeler
Mvanhelden
26 Wheeler
tracyb
Well-known member
a buddy has a race trailer that the doors are on the opposite side of an rv ?? i think its featherlite brand
Burns
Well-known member
Blew my tranny.....in the Outback. With the Fummins down, had to borrow a friends "Bling Bling GMC" to drop it all off. Plow on made for a good swing when turning. Dogs the best copilot...not helpful with directions though (if you look close you can see her in the passenger seat of the gas station pic).
Mvanhelden
26 Wheeler
YotaAtieToo
Thick skull
- Thread starter
- #188
My tow rigs keep getting smaller and smaller, next I'll be in my samurai 
Good thing I did tundra brakes
Good thing I did tundra brakes
Projectjunkie
Whatever
Empty 40 footer, my buddy with the dually was buying it
the guy with the landoll was a crybaby/ ******, didn't think he could make the turns, even though I had another hauled from next to it, the week before
We pulled it sideways, then down the driveway and parked it on the dirt road for the semi. The dodge had plenty of torque, but got to hopping in the soft stuff on highway tires, I have plenty of traction and power, but respect my ifs...
With him chained to the box, and a strap between us, it went pretty smooth
Mvanhelden
26 Wheeler
YotaAtieToo
Thick skull
- Thread starter
- #191
F150 doing more big truck work
At least this time it was less about 1200 lbs of iron.
At least this time it was less about 1200 lbs of iron.
YotaAtieToo
Thick skull
- Thread starter
- #192
Poor F150 again.
Last time I had the 97 on a scale it was close to 9k lbs with all 3 tanks full. Stock rear 18g, aftermarket front 40g and 100g steel transfer tank. I had to go by the dump and asked about pulling on the scale, but she said no, can not do that pretty sure she's new. 
Last time I had the 97 on a scale it was close to 9k lbs with all 3 tanks full. Stock rear 18g, aftermarket front 40g and 100g steel transfer tank. I had to go by the dump and asked about pulling on the scale, but she said no, can not do that
pretty sure she's new.
Muckin_Slusher
Digging the same hole for 19 years.
Big load today.
i hope your trailer brakes were working properly 
CDA 455 II
ANFAQUE2
I plan on installing a 2.5" hitch receiver on the Bronco in order to properly use a 2" hitch box extension.
I want to tow my HMMWV trailer behind the Bronco/camper.
I want to tow my HMMWV trailer behind the Bronco/camper.
CDA 455 II
ANFAQUE2
If you mean where I take the pics; I don't venture out beyond town for fear of breaking down.You should learn "backdrop assessment"
I've spent the last two years replacing old/worn out parts, moving and not, getting the Bronco in shape.
On the 1st; I'm getting newer HMMWV tires for the front axle.
Once that happens; I'll be much more confident to go places beyond town.
arse_sidewards
Well-known member
- Joined
- May 19, 2020
- Messages
- 10,758
Provience
Kill!
I'm optimistic this will hold together for 4 days 
tarps hide many sins.
The truck is on a hill and the trailer is mostly on flat
tarps hide many sins.The truck is on a hill and the trailer is mostly on flat
CDA 455 II
ANFAQUE2
arse_sidewards
Well-known member
- Joined
- May 19, 2020
- Messages
- 10,758
I'd send it.I'm optimistic this will hold together for 4 days
The truck is on a hill and the trailer is mostly on flat
Provience
Kill!
All the lights work and the Tarp is tight, so at least it shouldn't try attention to itself
Mvanhelden
26 Wheeler
tracyb
Well-known member
if you have to do a 4 day trip like that again, might be worth looking into shrink wrap... like wha tthe do to cover boats in the off season. shrinks down real tight and can take a trip down the highway no problem.I'm optimistic this will hold together for 4 days
The truck is on a hill and the trailer is mostly on flat
shrink wrapped direct tot trailer would hardly need any straps
YotaAtieToo
Thick skull
- Thread starter
- #206
Hopefully I have enough truck and trailer for this beast
2400 lbs, and will go through a ~36" gate
Should fit between the house and fence a lot better than the 7 ton machine we had.
2400 lbs, and will go through a ~36" gate
Should fit between the house and fence a lot better than the 7 ton machine we had.
Muckin_Slusher
Digging the same hole for 19 years.
ANY machine will go through a 36" gate.Hopefully I have enough truck and trailer for this beast
2400 lbs, and will go through a ~36" gate
Should fit between the house and fence a lot better than the 7 ton machine we had.
YotaAtieToo
Thick skull
- Thread starter
- #208
ANY machine will go through a 36" gate.
You mean like crash through? I mean sure
He yard is all soft and there is a bunch of **** in the way. The bigger one would havae barely fit between the fence and house, I probably would have had to just use the pivot boom instead of spinning to toss dirt
YotaAtieToo
Thick skull
- Thread starter
- #209
So that thing actually sucks into 30" wide
Had to take it back like a half mile and didn't want to unchaim and unload the Kubota. So they got to snuggle up
Had to take it back like a half mile and didn't want to unchaim and unload the Kubota. So they got to snuggle up
