War Pig Version 12

I wonder if there are different mounts?
 
The 80's called... and I am seriously going to run it.

Just in parts collection phase, with most of the rear end stuff here, which means I will be doing a 4" K30 Shackle flip on the 2.5" wide P30 springs, to set up the rear end. I was going to use the F350 rears I have, but the P30 rears will handle more weight and it has a bitchen sway bar on it.

Oh the light bar and the bed are just sitting there.
.

142339488_10220458357223735_4698652904291791057_o.jpg
 
Last edited:
I’m running a 40 gallon Suburban tank on my International, between the frame rails, behind the rear axle. I used the Suburban crossmembers and straps to mount it.
I’m using the stock IH frame, though.
 
DNL said:
I’m running a 40 gallon Suburban tank on my International, between the frame rails, behind the rear axle. I used the Suburban crossmembers and straps to mount it.
I’m using the stock IH frame, though.
Click to expand...

I am pondering that: I have one of those loaded in my eBay shopping cart. Straps and all Just need to swap out the gas sending unit for one that will handle a BIG Diesel lift pump.
 
The tank in my pickup was from a diesel, I don’t know if it’s different from a gas truck of the same vintage. It doesn’t have an in-tank pump, just a 3/8” pickup tube. It would be easy to upgrade
 
DNL said:
The tank in my pickup was from a diesel, I don’t know if it’s different from a gas truck of the same vintage. It doesn’t have an in-tank pump, just a 3/8” pickup tube. It would be easy to upgrade
Click to expand...

Right. It's the lift pump and building the sending unit I am pondering.

I don't need one, since I have a CP3, but I want one.
 
Ordered 2 new (to me) front fenders, 2 front doors, 2 rear doors and 2 rear fenders.

153791507_1391483124524588_7742777347748528434_n.jpg
 
Are you pondering what I am pondering?

157425981_10220740545598268_8747912692937483117_n.jpg


157929690_10220740179109106_825046086887537658_o.jpg


157284171_10220740179949127_4688967296172972397_o.jpg
 
Will convert the dually front to SRW.
 
Started mocking up the front end... at the end of the day, I think this needs at least 37's. Front axle will move back 3" to center in the wheel well.

157493272_3505439532900046_5930314856109657514_o.jpg


157692583_3505439682900031_1553951715598475902_o (1).jpg


157687602_3505439402900059_4331833882973726329_o (1).jpg


157692583_3505439682900031_1553951715598475902_o.jpg
 
So I am fighting my thoughts on the radius arms. I've looked at all the pics, and I think at ride height I want, I'd have sufficient up travel before the arms hit the frame... but the fix my head needs, is to lift it more and run bigger tires.
Rough times. :flipoff2:

Thinking mil spec 42's on 20 inch rims.

Like a 12.00R20 Goodyear G272 - they're not really that tall.
 
Setting in the engine cradle while we design out the Radius arm mounts. As I said, I think they need to be lower than the 2" the WFO kit provided. I know I have the frame clearance, but designed a 3.5" drop mount that will be made of 3x5" 3/16" wall box and laser cut. Will also be tied into the frame web and flange.

Also centered the front wheel where I want it.

157234933_3507629256014407_8495312525784030533_o (1).jpg
 
Grendel said:
Setting in the engine cradle while we design out the Radius arm mounts. As I said, I think they need to be lower than the 2" the WFO kit provided. I know I have the frame clearance, but designed a 3.5" drop mount that will be made of 3x5" 3/16" wall box and laser cut. Will also be tied into the frame web and flange.

Also centered the front wheel where I want it.
Click to expand...

And yes, a 550hp Duramax, Allison 6 speed and 4.33's should handle 40" tires pretty well.

The 35's are just rollers.
 
Truck looks great man! Height wise I would maybe try the new tire before going up anymore. I thought the 12.00R20's were even taller at 44" and the 11.00R20 G177's I had were around the 42" mark? I could be remembering wrong though its been years and they were only on truck for a month before I found the 16.00R20's.
 
350TacoZilla said:
Truck looks great man! Height wise I would maybe try the new tire before going up anymore. I thought the 12.00R20's were even taller at 44" and the 11.00R20 G177's I had were around the 42" mark? I could be remembering wrong though its been years and they were only on truck for a month before I found the 16.00R20's.
Click to expand...

12R is more like 42". I have a set here, just need 20" rims for 8 on 170MM.
 
bigun said:
You going to have a fold out ladder or an elevator to get in! :flipoff2:
Click to expand...

I have plans for some sliders, but that's about it. Maybe a cable step.
 
I am also pondering a 4 link with the factory D60 mounts and the arms I have.

Thoughts?
 
For the front, with the radius arms? Would seem unnecessary to me, vs just putting a panhard in.
 
You must log in or register to reply here.
Top Back Refresh