What's new
By:
Filters

Useless things about your day!

anyways thread related in my own life and rather than others'

I finally understand my neighbor's penchant for having an uninsulated house and shop then burning 10-20 cords of wood every winter
spent two days digging out and bagging squirrel chewed fiberglass contained behind XPS foam board
fuck shit fuck shit fuck shit

Because I'm my own brand of retarded, I'm imagining all the money spent on the foil-backed fiberglass and the 1" xps, wondering if it ever broke even with the energy savings
 
[486] said:
4wd spindle and spindle nut? use an outer race for your slip fit foot
Click to expand...
I was thinking spindle nut but couldn't come up with a way to get the needed length. The spindle nut got me thinking though...

What if I welded an inner race to one side of the nut and a stub of pipe to the other. The race would give me engagement with the OD of the spindle for anti-slop and the me some empty space for the threads to project into. But that requires four spindles I DGAF about which probably won't happen.

Maybe four old truck screw jacks. But those are tall as fuck which is something I'm trying to get away from.
 
arse_sidewards said:
Can anyone think of a source of a big fine thread nut and matching male thread? Something on the order of a differential side adjuster.

I'm trying to make leveling feet for something so it needs to be fine.
Click to expand...

If your willing to wait until we do mill grates again (fall) I'll send you some 1-1/4 shit. If you give up on fine thread I have a shit load of 1-1/2" rod I'm about to turn into scrap.

I don't know what you are planning on supporting with feet that big but it's overkill by several magnitudes.
 
Why not just a flat plate foot of 1/2” thickness with 3-4 3/8” fine thread set screws tapped per foot and a plate below it? The bottom plate can be loose or with a loose fitting dowel in the center to capture. De rigueur for precision set industrial equipment.
 
Last edited:
arse_sidewards said:
I was thinking spindle nut but couldn't come up with a way to get the needed length. The spindle nut got me thinking though...

What if I welded an inner race to one side of the nut and a stub of pipe to the other. The race would give me engagement with the OD of the spindle for anti-slop and the me some empty space for the threads to project into. But that requires four spindles I DGAF about which probably won't happen.

Maybe four old truck screw jacks. But those are tall as fuck which is something I'm trying to get away from.
Click to expand...
https://www.usarollerchain.com/n00-series-inch-lock-nuts-s/4347.htm
and some pipe
and enough fucking balls to learn how to single point threads
you fucking pussy :flipoff2:

oh and fix your garbage, a lathe that can't thread is a lathe that is fucking broken
 
[486] said:
they're just stainless steel, basically valueless
copper pennies is the one that you can still get value out of
you sort them through inductive magnetic wizardry, roll them past a magnet and the copper ones slow down a lot more than the zinc ones, place a couple buckets on the ground past your apparatus and the copper ones fall closer to the magnets
Click to expand...
From what I've read they are 75% copper 25% nickle.
 
Vintage 1982. pretty cool. prob last/only time these bearings were greased.
1713496365728.png
1713496376567.png


78 bearings freed up, douched and re-packed. :smokin:
1713499443553.png


Should be good to go for another 42 years.:grinpimp::beer:
 
Last edited:
IowaOffRoad said:
Why not just a flat plate foot of 1/2” thickness with 3-4 3/8” fine thread set screws tapped per foot and a plate below it? The bottom plate can be loose or with a loose fitting dowel in the center to capture.
Click to expand...
That's actually a really good suggestion because of how low profile it is. 3-screws to ensure even weight distribution on the . 12mm is very readily available in extra-fine and the nuts you'll need to lock it are cheap.
IowaOffRoad said:
De rigueur for precision set industrial equipment.
Click to expand...
I've never seen anything like that. Always either shims, threaded feet or the expensive sliding wedge things.


speed bump said:
If your willing to wait until we do mill grates again (fall) I'll send you some 1-1/4 shit. If you give up on fine thread I have a shit load of 1-1/2" rod I'm about to turn into scrap.

I don't know what you are planning on supporting with feet that big but it's overkill by several magnitudes.
Click to expand...
I think I'm gonna go with Iowa's suggestion on this one but I might hit you up this fall if I get a replacement for the Cincinnati in that time. :laughing:

Dethmachinefab said:
How about something like a coilover body?

Why the large diameter?
Click to expand...
Large diameter just seemed right for the size of machinery it's gonna be supporting. :homer:

[486] said:
https://www.usarollerchain.com/n00-series-inch-lock-nuts-s/4347.htm
and some pipe
and enough fucking balls to learn how to single point threads
you fucking pussy :flipoff2:

oh and fix your garbage, a lathe that can't thread is a lathe that is fucking broken
Click to expand...
I'll get there eventually when I'm forced to learn for some project for which that's the right tool for the job.
 
[486] said:
anyways thread related in my own life and rather than others'

I finally understand my neighbor's penchant for having an uninsulated house and shop then burning 10-20 cords of wood every winter
spent two days digging out and bagging squirrel chewed fiberglass contained behind XPS foam board
fuck shit fuck shit fuck shit
Click to expand...

The solution to that is sprayed foam or cellulose or rock wool
 
arse_sidewards said:
I've never seen anything like that. Always either shims, threaded feet or the expensive sliding wedge things.
Click to expand...
I suppose the industrial spaces I've been in have always had a mix of solutions, but the one I described I've both build for equipment myself and seen versions of on both old and newer equipment. The auto load lathes I ran that handled 12-20' bar stock had something similar under both the lathe and the bar feeder.
 
rockmup said:
The solution to that is sprayed foam or cellulose or rock wool
Click to expand...
I was looking at the mess of fiberglass and animal shit, thinking maybe I could jam all of it from the 20 or so stud cavities into only a few of them, "dense pack fiberglass" I believe I've heard it called.

The outside sheeting is tongue and groove barn siding with light showing through everywhere, so I'd need to line the inside of that with some of the miles of crappy luan paneling plywood they loved tacking up layer upon layer (or tar paper), then sheet the inside with some 3/4 ply I've got banging around

but then surely it'd still attract water and then rot out the wall its in, but I wouldn't need to haul it down to the cities and abuse the far too small garbage dumpster where I occasionally work.

I'm losing my admiration for the sprayfoam, with the more water intrusion that I see anywhere and everywhere
 
With how you've gutted that house "blown in" is more like "pour in". That's the route I'd take.
 
[486] said:
I'm losing my admiration for the sprayfoam, with the more water intrusion that I see anywhere and everywhere
Click to expand...

Explain that to me because CC foam is not permeable, ever. Open cell is permeable but you have construction issues if you're getting water in it. Thats not the foams fault
 
this is a literal chicken coop with tin atop shakes, old enough to be nailed down with those lead washer nails

maybe 10x30
I might tack tin on the outside later on if I end up getting scrapyard tin for dirt cheap
 
rockmup said:
Explain that to me because CC foam is not permeable, ever. Open cell is permeable but you have construction issues if you're getting water in it. Thats not the foams fault
Click to expand...
squirrels and mice still chew through the foam in my experience
gotta shoot the ones that know there's an "inside" to get the holes to quit appearing
 
Massass do you have some type of drawing of what you want. I need a better picture of what you want before I decide to help or make fun of you. :flipoff2:
 
87manche said:
I'm surprised they didn't tell you to take that devil Internet out of their house
Click to expand...
I wish I could make a 30 minute TV series about my parents and myself being an only child, and the theme would be "this is how you make only one kid and then get them to abandon you when you're elderly and eventually not even know which nursing home you're in".

It would be a good show.



Not running through a 30 pack, I got 3 Sierra Nevadas left from doing a brake job for a buddy and that's going to be fine. Grill lit, filets about to go on once it hits 2000 degrees. :long sigh:
 
[486] said:
what the hell are you doing there, you'll kill them with your unvaccinated covids
Click to expand...

Me experience with these people is that they're is no logic. I spent probably 4 months during covid working on a remodel with an elderly family friend who knows damn well I did not get vaccinated, but then bitched that he wouldn't let his son come visit since he wasn't vaccinated, I'm like wtf?


Now we're in 2024 and everybody forgot about all their snide remarks.

There's no logic, no accountability, they just want free TV now
 
You must log in or register to reply here.
Top Back Refresh