Dookey
WINNAR
Jason's Sting Gray Jeep with paint matched outer rings.
I'll be in the market soon, 17" - 8x6.5. Backspace still at 4" and 9" wide?
Hey Dookey, any updates on the 20s? I'm getting close to need to make a decision on my wheels so I can set my axle width.
I'm sure I would love them, but afraid to even ask.Unlikely I'll be ready for you. I have a new private label contract I've been working on coming online and sourcing the raw materials has been a nightmare. So my 20's got pushed back. Unless you want full billet wheels.
PM sent4.5" backspace.
I just need to know when the "Buy 1, get four free sale" is gonna be!
Unless you want full billet wheels.
Just out of curiosity, What would a full billet wheel cost?
22.5 x 14 w/ 2" offset.What size and back spacing?
I don't really need a billet super single rim
No seriously, I want to know. I know it's gonna be a hilarious number. I just wanna know what that number is.Well then... if you have to ask.
PM in bound.No seriously, I want to know. I know it's gonna be a hilarious number. I just wanna know what that number is.
What size and back spacing?
Just your standard 17" , 9" wide, 4.5" back space, 8x6.5
I kinda talked with TR about it a few years ago. Was going to be $1500-2000 per.
any plans on learning to read previous posts?Any plans of making a 20?
What front diff ya got in that Jeep ? My TJ has a SD60 with the giant ass Barnes weld-on steer arms and I have to run a 1/2“ spacer to clear 4.5” BS steel wheels…long story short..have you ran into any fitment issue with your customers? The contour of that back wheel half has a different look to it and I‘m just not willing to run anything more than a 1/2” spacer.Who doesn't remember this one?
Revenge on 43" TSL Stickies.
What front diff ya got in that Jeep ? My TJ has a SD60 with the giant ass Barnes weld-on steer arms and I have to run a 1/2“ spacer to clear 4.5” BS steel wheels…long story short..have you ran into any fitment issue with your customers? The contour of that back wheel half has a different look to it and I‘m just not willing to run anything more than a 1/2” spacer.
Man..that picture is worth a thousand words! I was envisioning it having less clearance but that wheels got tons of space .That Jeep runs Reid inner knuckles with Solid Dana 60 Outer knuckles and Artec High Steer Arms. My wheels have the largest opening you'll find on 17" wheels as there is no dip in the middle for seating a tire. Up at the bolts the smallest I.D. is 16.25" and goes out from there. The backspacing is set at 4.5" so measuring your Barnes arms should be simple to confirm if they'd fit. :)