Snowracer
Well-known member
- Joined
- Jun 25, 2020
- Member Number
- 2176
- Messages
- 511
welded some link mounts up and cut links to length and tacked everything so could get the front diff under the buggy. gained 1.5 inches of extra uptravel once links where in place, new limiting factor is now the p/s pump and link clearance. im already sitting at a 12 inch belly height at full bump so not going to try and get any more uptravel as that should make my links flat at ride height with 6-7 inchs of uptravel
weld washers seem to make everything look better
pump is not fully mounted so will go up a little but still this is getting close at full bump
no issues on pass side
shop helper kept trying to be in all the pictures
liking the look of it so far with the 39s on it
weld washers seem to make everything look better
pump is not fully mounted so will go up a little but still this is getting close at full bump
no issues on pass side
shop helper kept trying to be in all the pictures
liking the look of it so far with the 39s on it
Last edited: