Since the T-case is in the way of the exhaust and running outside the frame is a poor choice, it got run through the frame. I give you the framuffler!
I planned ahead for this, there are a few baffles welded inside the frame. It also got drains at the low point just in case. It will have dual exits in the rear. Needless to say, brake/fuel lines and wiring harness will not be mounted to the frame.
I planned ahead for this, there are a few baffles welded inside the frame. It also got drains at the low point just in case. It will have dual exits in the rear. Needless to say, brake/fuel lines and wiring harness will not be mounted to the frame.
Last edited: