We now have Raceline Wheels and Rugged Radios supporting our race program for the 2023 Ultra4 season. We got some new beadlocks wheels and a new waterproof radio for King of the Hammers.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Race truck 4653
- Thread starter Pitbullcruiser
- Start date
-
- Tags
- toyota
ridered3
Low Talent Wheelin
That’s great that you are getting some support/recognition.We now have Raceline Wheels and Rugged Radios supporting our race program for the 2023 Ultra4 season. We got some new beadlocks wheels and a new waterproof radio for King of the Hammers.
I got some fresh BFG KM3s put on the beadlocks and shocks/ air bumps got boxed up and ready for service.
YotaAtieToo
Thick skull
Just curious why you chose to run km3's?
I'd say maybe wieght, but your running steel wheels, so
Congrats on the sponsorship though, your dedication has paid off.
I'd say maybe wieght, but your running steel wheels, so
Congrats on the sponsorship though, your dedication has paid off.
Just curious why you chose to run km3's?
I'd say maybe wieght, but your running steel wheels, so
Congrats on the sponsorship though, your dedication has paid off.
The KM3 is a tough tire. They work great in any terrain I put them in, they are significantly lighter than the DOT Krawlers we previously ran. The only issues with the KM3s have all been driver error related.
A couple of photos from U4 Nationals.
Hodgiemoto
Well-known member
- Joined
- Oct 16, 2020
- Member Number
- 2950
- Messages
- 173
I would think aluminum 15" bead locks would be hard to find and I bet the steelies are just as light. Plus 15s are so much cheaper than 17s.
Looking good and as mentioned way cool on the sponsorships!
Looking good and as mentioned way cool on the sponsorships!
'84 Bronco II
El Chingón
Just curious why you chose to run km3's?
I'd say maybe wieght, but your running steel wheels, so
Congrats on the sponsorship though, your dedication has paid off.
From what I've seen, steel beadlocks are the same weight as cast aluminum beadlock and maybe even slightly lighter
Yep, I think we went down that rabbit hole sometime last yearFrom what I've seen, steel beadlocks are the same weight as cast aluminum beadlock and maybe even slightly lighter
YotaAtieToo
Thick skull
Wrong!From what I've seen, steel beadlocks are the same weight as cast aluminum beadlock and maybe even slightly lighter
Per race lines website
15x8 monster aluminum beadlock: 33 lbs
15x8 steel beadlock: 34 lbs
It's weird to me because every time I pick up an aluminum wheel, I'm shocked at how light some of them are. Not sure how messed that up
Put a set of fresh doors on the race truck for KOH and the 2023 U4 season. The doors still need to be painted, secondary latch installed, set up for window nets and sponsor decals applied.
I'm thinking Neon Olive Drab with a big site logo would look sweet with the black
Definitely, 3 please.I'm thinking Neon Olive Drab with a big site logo would look sweet with the black
The truck got a fresh grill today.
The doors are now black. I added new fenders recently also.
Pulled everything out of the cab for a good cleaning and inspection.
Old seats out new seats in. Race Truck!
Excited to have YukonGear&Axle supporting our 2023 race season! Going to throw a fresh 4.88 diff with a Grizzly Locker into the front axle.
Trail Rig Racing is now on Team Amsoil !
Today was fluid day on the race prep schedule.
-Drain/ Fill-
Engine
Trans
T-case
Front diff
Rear diff
Steering
Brakes
Clutch
Coolant
Today was fluid day on the race prep schedule.
-Drain/ Fill-
Engine
Trans
T-case
Front diff
Rear diff
Steering
Brakes
Clutch
Coolant
Thats awesome man!
ridered3
Low Talent Wheelin
Congrats on Amsoil and that’s quite a bit of fluids.
chaplinfj60
Well-known member
love the race prep markig on all your bolts and such. bad ass and congrats
Sexeh
I think there are enough stickers on the truck now lol.
ridered3
Low Talent Wheelin
I think I see a few more spots here and there for small stickers like Hunter’s 170 Racing.I think there are enough stickers on the truck now lol.
Cool to see the codriver name on the door.
Throwing in some fresh spark plugs and got the parts to make a spare front driveshaft.
GLTHFJ60
Stupid is as stupid does
Planning on welding together a driveshaft at the event I assume, parts for front or rear? If the tube gets candy-caned, it would be beneficial to bring some tubing too right?
Mad props to everything you do.
Mad props to everything you do.
The front driveshaft parts are currently at my local driveshaft guy being built.
The truck is ready!
ToyodaAddict1980
Well-known member
- Joined
- Mar 22, 2021
- Member Number
- 3706
- Messages
- 126
Where did you get the spline? Is it long enough?
Better question is, is it too long and going to break his t case again?
ToyodaAddict1980
Well-known member
- Joined
- Mar 22, 2021
- Member Number
- 3706
- Messages
- 126
That was some impressive carnageBetter question is, is it too long and going to break his t case again?