crispins
FJB
$20 is $20 broHe is just jealous because you used to do gay porn.
$20 is $20 broHe is just jealous because you used to do gay porn.
Because you don't pay attention, they gave him issues right off the bat.
Mine went through 2 sub trans in 400 miles. Plastics are made by saturn I think as the crack when you drive past a tree. They are nothing like the Honda ranchers.
The talon is also the only one, iirc, to be flipped, twice, because they make them sit tall and narrow from the factory. Especially if you change tires from stock.
Ugg - I just don't think I can do that.Put a stick between the seat and gas pedal and go about the rest of your day. Just let it just sit there and bang limiter as long as she needs to.
Sounds fine, is fine. Let it ride another season.Ugg - I just don't think I can do that.
The suggestion to chop the throttle on and off I think is the one I am going to try.
This thread was mostly just venting my frustration that for the last 225+ hours the machine makes metal glitter into the oil and still sounds fine.
I cannot do anything like putting ether into it or remove all the oil.
basically I was just looking for tips to get it to go sooner than later as there is no way this motor will last as it is eating itself.
why cant you put ether in it?Ugg - I just don't think I can do that.
The suggestion to chop the throttle on and off I think is the one I am going to try.
This thread was mostly just venting my frustration that for the last 225+ hours the machine makes metal glitter into the oil and still sounds fine.
I cannot do anything like putting ether into it or remove all the oil.
basically I was just looking for tips to get it to go sooner than later as there is no way this motor will last as it is eating itself.
I think WI winters and TN winters are not the same, but with that said I will give that a try as it makes sense that the cold bearings will have more tolerance in them.Like I mentioned before leave it outside on the coldest day and start and rev it to the moon. That’s how I killed my forklift, that and never checking the oil .
That is most likely what will have to happen.Sounds fine, is fine. Let it ride another season.
Wait he stopped??He is just jealous because you used to do gay porn.
How long is your warranty good for?That is most likely what will have to happen.
The ether, well I think blowing the piston apart isn't going to look like a natural occurrence - IMOwhy cant you put ether in it?
why cant you put a stick on the pedal?
your emotions?
4 yearsHow long is your warranty good for?
I will try that tomorrow, I doubt I will get anywhere but worth a shot for sure.Honest question, does Polaris have a corporate number you could call for dealer complaints? You're a relatively high volume customer and you're getting jerked around by a dealership, imo to run out the warranty clock on a known issue. I don't know if it'd get you anywhere but I've wasted 15 minutes on worse
put it on jack stands and stick it in low, maybe disconnect the electric fanAs for the stick on the the pedal I do not think will work because these things are limited to 4k in neutral and if I remove the belt pretty sure it will go right into limp mode as it will sense that the speed on the primary does not match the speed on the secondary and that also limits it to 4k as well
So set the ass-end on a couple of jackstands and pin the pedal to the floor with it in gear... Worst thing that could happen is the tires come apart from overspeed...The ether, well I think blowing the piston apart isn't going to look like a natural occurrence - IMO
As for the stick on the the pedal I do not think will work because these things are limited to 4k in neutral and if I remove the belt pretty sure it will go right into limp mode as it will sense that the speed on the primary does not match the speed on the secondary and that also limits it to 4k as well
You mean no warranty? Because it’s used for commercial purpose via rental.4 years
You mean no warranty? Because it’s used for commercial purpose via rental.
All true
I plan on changing the wheels on the one I have left to 14" so I can run the wide 27" tall tires which I hope will help it to stay off its side.
This is exactly what I was thinking, Crispy doesn’t feel the same way.You mean no warranty? Because it’s used for commercial purpose via rental.
Damn dude , I don't see that at all .Because you act like a fucking entitled little **** and people have coddled your ****iness on this and the previous forum.
I don’t agree with your thought process
I bought the warranty from the dealer and it is in my companies name, they know very well that they are rentals.This is exactly what I was thinking, Crispy doesn’t feel the same way.
The ether, well I think blowing the piston apart isn't going to look like a natural occurrence - IMO
Are you sure commercial use doesn’t void the warranty?ah, get to know me, I got lots more ways I am a dick than that.
I am not sure why some of you are hung up on that?Are you sure commercial use doesn’t void the warranty?
The ether, well I think blowing the piston apart isn't going to look like a natural occurrence - IMO
As for the stick on the the pedal I do not think will work because these things are limited to 4k in neutral and if I remove the belt pretty sure it will go right into limp mode as it will sense that the speed on the primary does not match the speed on the secondary and that also limits it to 4k as well
Honest question, does Polaris have a corporate number you could call for dealer complaints? You're a relatively high volume customer and you're getting jerked around by a dealership, imo to run out the warranty clock on a known issue. I don't know if it'd get you anywhere but I've wasted 15 minutes on worse
I will try that tomorrow, I doubt I will get anywhere but worth a shot for sure.