***Fail***

[Steve300xcw]

from a Ebay listing

Any theories as to what happened?

Looks like, fuck it happened

 

[Chkn]

Any theories as to what happened?

Totally fair game, it’s got a cage! 🤣

 

[Benny]

Any theories as to what happened?

That cop needs to mind his own business

 

[SomeGuyFromOlympia]

the three drunk neighbors here do this but with a old boat
they hook onto it and drive it three miles like that when they get blasted and leave it in their friends yard
I am actually surprised how many miles you can get out of fiberglass on pavement

 

[Sluggy]

Well its a toyota, probably smoke a little when you right it.

 

[xr-nut]

Watched my buddy do that.
Someone forgot to close the ball valve on the pan before plugging in the air hose to drain the sump.


Why they didn't just turn off the air instead of letting it blow all 20 gallons is a mystery though....

My youngest did it here. I was away at auction so I missed it. there were no pictures taken. shit was all over the ceiling, the walls, everywhere.

We kind of did it today. much smaller scale. Filling the heater tank from a 300g tote. kind of overfilled it, just a little ><. 4 bags of floor dry later and crisis averted.

 

[Mikel]

Deliberate?

 

[Southernfriedcj8]

Looks like a model truck/hoe.

 

[Sluggy]

Looks like rc cars

 

[Mikel]

Yes, looks like models

 

[clodhopper]

 

[clodhopper]

 

[TrailTamer]

R

 

[ckupq]

What sort of overlanding POS has an electric rear sway bar disconnect?

kind of reminds me of the corvette exhaust where they had baffles to make it loud when you hit the skinny pedal. The "Loud Mod" was to pull the fuse because when the car shut off they opened.

 

[clodhopper]

R

yeah, I suck. Whatyagonnadoboutit?

 

[Southernfriedcj8]

yeah, I suck. Whatyagonnadoboutit?

You suck? Then suck some cock, cocksucker.

 

[clodhopper]

You suck? Then suck some cock, cocksucker.

Well, I failed in the fail thread, so at least it was the right thread.

 

[SomeGuyFromOlympia]

Well, I failed in the fail thread, so at least it was the right thread.

 

[Mikel]

I'm going to guess this is going to be expensive.

 

[Wades_76_cj7]

what say the yellow iron experts? Panz and Carter can that be fixed or just scrap it? I am sure it can be fixed but would the repair cost outweigh value of machine?

 

[Southernfriedcj8]

I'm going to guess this is going to be expensive.

There is a guy in Australia that's got this ultimate set of tools and a YT channel. He can fix it.

 

[arse_sidewards]

Fix and send to auction before the fact that you didn't get it perfectly in line wears out everything that moves.

 

[ThePanzerFuhrer]

what say the yellow iron experts? Panz and Carter can that be fixed or just scrap it? I am sure it can be fixed but would the repair cost outweigh value of machine?

POS Chinese machine scrap it

 

[Steve300xcw]

what say the yellow iron experts? Panz and Carter can that be fixed or just scrap it? I am sure it can be fixed but would the repair cost outweigh value of machine?

They will probly say the same thing that they said last time

 

[nahmus]

There is a guy in Australia that's got this ultimate set of tools and a YT channel. He can fix it.

Is he a TV repairman?

 

[trampas]

 

[baldduck1974]

I'm going to guess this is going to be expensive.

Its fixed and in a heidelburg quarry in Ohio now, this happened in Indiana. Id had over 60,000 frame hours when this happened. I ran this machine for a little bit.

 

[ThePanzerFuhrer]

It’s fixed and in a heidelburg quarry in Ohio now, this happened in Indiana. Id had over 60,000 frame hours when this happened. I ran this machine for a little bit.

What machine model is it. The forward mounted steering cylinders makes it odd. Only thing I could think of is possibly a 988h with the mono boom. I haven’t looked too closely at the to see if the steering rams are mounted that way.

 

[Mikel]

Its fixed and in a heidelburg quarry in Ohio now, this happened in Indiana. Id had over 60,000 frame hours when this happened. I ran this machine for a little bit.

What's considered to be very high hours in that kind of machine?

 

[baldduck1974]

What machine model is it. The forward mounted steering cylinders makes it odd. Only thing I could think of is possibly a 988h with the mono boom. I haven’t looked too closely at the to see if the steering rams are mounted that way.

First generation 992G