bronco

Been working on a 76 Bronco for a while now and recently got it drivable again after some extensive rust repair. I live in the rust belt and have no intention of taking Bronco out in the winter and expose it to the liquid rust that DOT puts on roads. Plan is for it to be a no top, no doors, nice...

So ive always had a problem with the drivers side upper controll arm comming looses and rattleing. Up untill now ai just throw a wrench on it and tighten it back up ever month or so. I have things pulled apart to take a closer look and am now trying to figure out where the pivoting is...

New never used. Fits badlands and sasquatch. $125 shipped

Hey, what’s going on guys! I’ve been a member on FSB.com for a long time, but I thought it was about time I started a thread over here. FSB seems to be fading away a bit, and my Bronco is starting to get to be a bit more of a wheeling rig, so it seemed right to post it up here. I started...

One long and two shorts. D44 78-70 Located in Akron/Canton Ohio will ship on your dime.

So I acquired this FSB (Farm Sitting Bronco) that had been sitting for 7 years. It was abandoned at my uncles farm up north, Taft, CA. Pretty much stock, after a couple fuel pumps and a new gas tank and tune up its up and running. I get the bronco in December 2022, it passed smog, me and my...

I am still a bit shocked, but maybe I shouldn't of been... I met my wife, after I had gotten away from trail wheeling, competitive rock crawling, and racing after my 1st and 2nd divorce. :homer: I was just dirt biking at the time we met. After we were married, we got a Rzr and were having fun...

Wanted to get a fun Daily so I can leave the tow rig parked. 2023 bronco Badlands fit the bill with a removable top and doors, front and rear lockers cutting brake 360° cameras and all that jazzy shit from the factory. Boy, do they look like a flame soccer mom rig stock. so far, we’ve got Fox...

I'm getting ready to 3 link my 78 bronco with 2015 superduty d60 axles. I decided on 3 linking 4 years ago. Bought the axles and some of the parts, cut everything off the axle then the engine blew and it's been sitting since. Now I'm ready for the axles, and I definitely would have just done...

Was thinking about this, and don't recall seeing a thread on this, but is the Braptor 4600 legal? Was checking the rulebook, and it looks like the shocks and tires are not legal. For some other mods (like trailing arms) the rulebook says unless factory equipped, but on shocks and tires it does...

So who'll be the first to spend $295K and race a Bronco DR in the 4500 class?

So I've got a '74 Bronco that has an old tired motor that I built on a budget back in 2001 when I was an E5 in the Navy. Here we are 20 something years later and the motor is wore out. I have a stock 351 roller motor half rebuilt on an engine stand and a 408 stroker motor that I was building...

So got a stock 1980 Bronco 5.0 v8. I need to check push rods for straightness to determine why I'm having a misfire. When doing this do these motors have a set torque spec for rocket arm bolt of like 20 ft lbs or do you have to rotate motor until valve would be closed and tighten to remove...

Some of you know me as an early OG from Pirate. I kind of got away from doing off-road stuff and instead focused on street cars. Anyway, a client asked if I could help with his project. I'm retired and would rather spend time on my stuff, but this seemed like a really cool project. I also...

Ok so I have a 1989 bronco with 302 4 speed manual. It revs and runs fine in neutral sitting in my shop. When I drive it I get a misfire when I get fast enough to shift into 2nd gear and I hold steady throttle until 3000 rpm than runs smooth until I shift again. Does same thing misfires even...

Getting a popping/backfiring sound through the carb around light-moderate throttle at light load (like a small incline) or accelerating to 40-50 MPH. Seems to be around 2500-ish RPM. Since I got the Bronco running I've been cruising around the neighborhood up to about 50mph and never had a...

Building an axle & parts got stolen from side yard of shop. I’m hoping someone is doing a conversion to 5 or 8 lug. Need: 2 Spindles (Waggy/Chevy…. Iirc small bearing/cheap ones/not for 5 lug conversion) 2 hubs (6 lug, Jeep/Chevy) 2 caliper brackets Won’t say no to good rotors as well or...

My dad and I built this rig. Mostly it was me building and him buying the parts :lmao: As the thread title says, it started life as. 1979 Ford Bronco. Over the years it went from daily driver to semi-raisined off road rig. It's powered by a Ford 400M. I know it's a 400 and not a 351M...

I figured I might stop hijacking 2bb’s thead. 2022 Bronco Wildtrack. Has the bronco buster steering upgrades and a set of my own skid plates. Next mod is the last mod. I’m gonna leave some teaser photos for now and come back later to fill everyone in.

There haven't been many posts here about the new Broncos, so I figured I would document my fathers Bronco he bought new earlier this year. My father was looking at JLs and Broncos to replace his 2011 Mustang as his daily driver, but ended up getting a Bronco since he is a Ford die-hard at...