Dethmachinefab
Well-known member
- Joined
- May 19, 2020
- Messages
- 1,757
Its got its own wheels.
I like it but im still stuck 20yrs ago in my tractor pricing. Great machines though.
-
Last Call Guest on these Group Buy Deal Items from Baja Designs
-
We're moving data around, images may be off/on over the next few hours. Nothing is lost aaand no ... Nothing will Change Fo2
The TRACTOR thread
- Thread starter Alpine4x4
- Start date
I like it but im still stuck 20yrs ago in my tractor pricing. Great machines though.
GLTHFJ60
Stupid is as stupid does
I'd hate to drive that on the road for any real duration of time.
sdmuleman
Red Skull
IMHO great general purpose backhoe. Price seems high to me, but may be regional. $15k to me would be like new condition. Solid used I'd put closer to $10k, but again really hard to say. Also depends a lot on actual condition of the machine. 4B cummins, so reliable and easy to work on, though less power than newer machines. Shuttle shift has some weak spots but fairly easy to rebuild.
Pay close attention to the kingpins and front axle pivot, especially rear pivot - they tend not to get greased and will be expensive to fix.
One thing to note is weights are less buckets, and the ex hoe adds a significant amount of weight plus has a counterweight. Going to be right about 14k lb.
OE Spec sheet for reference.
https://cdn-assets.colemanequip.com/specsheets/580se.pdf
Java230
???
- Joined
- Jul 15, 2020
- Messages
- 1,389
Its ~150 on interstates.....
Thanks, newer ones around here are 30k
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
2big bronco
Og irate
Very good price if it were in ca. Great older machine that is a little slow and clunky. It will piss you off but do everything and always start.
Java230
???
- Joined
- Jul 15, 2020
- Messages
- 1,389
explain old and clunky. Never run a full size backhoe, only mid size kubota ones.
WLDWUN
in the woods
after 10+ years of deciding to do it or not, finally broke down and got this before I retire at the end of the year
2015 310SL
5200 hrs
spotless and everything works
multi-purpose bucket
12", 18" and 24" backhoe buckets
thumb and swinger bucket attachment.
now I have to figure out how to run it
2015 310SL
5200 hrs
spotless and everything works
multi-purpose bucket
12", 18" and 24" backhoe buckets
thumb and swinger bucket attachment.
now I have to figure out how to run it
Stix
Resident hick....
Pick a control pattern and stick with it. I’m jealous of the thumb......
I learned just by going out with nobody watching. Smooth is fast. Start with the throttle chopped way back....
I learned just by going out with nobody watching. Smooth is fast. Start with the throttle chopped way back....
sdmuleman
Red Skull
Not sure what he's talking about. It's not push button fancy electronic ****, but mine works smoothly and easily for everything I've done. If the control linkages are worn it may have slop in controls, and likewise if hydraulics are worn will leak down, have low power, etc., but that's a function of wear, not the machine. Flip side is that there's very little to break that's not simple cheap and obvious.
Hooligan
Xtreme wheeler of the web
Dang, sweet!after 10+ years of deciding to do it or not, finally broke down and got this before I retire at the end of the year
2015 310SL
5200 hrs
spotless and everything works
multi-purpose bucket
12", 18" and 24" backhoe buckets
thumb and swinger bucket attachment.
now I have to figure out how to run it
Stix
Resident hick....
And don’t let it idle much. I believe it has a dpf? We have a similar one on the ranch and believe it or not it can get to 130% of soot loading before finally telling you to **** off. Lol
2big bronco
Og irate
Just will likely have a little play everywhere from being an older machine. Pins, bushings, controlls, ect. Will have less power then a modern machine and its noticeable.
With all that said it will likely outlive you with less then basic maintenance.
Wades_76_cj7
Name is Wade, but your mom calls me Daddy.
that is gonna make unloading those logs off the trailer easier! nice score!after 10+ years of deciding to do it or not, finally broke down and got this before I retire at the end of the year
2015 310SL
5200 hrs
spotless and everything works
multi-purpose bucket
12", 18" and 24" backhoe buckets
thumb and swinger bucket attachment.
now I have to figure out how to run it
Wades_76_cj7
Name is Wade, but your mom calls me Daddy.
now get ready for all your new friends when they find out you have a backhoe..
hey Wldwun can you come over Saturday and help with XXXX. can you bring your backhoe?
hey Wldwun can you come over Saturday and help with XXXX. can you bring your backhoe?
arse_sidewards
Well-known member
- Joined
- May 19, 2020
- Messages
- 10,758
billybob_81067
Redneck
Backhoes run down the road pretty decent.
behind a subaru I'm sure.
and wear out my tires roading it on pavement?
no sir.
WLDWUN
in the woods
1oddtech
Unknown member
Backhoe?
I dont have one that I can see
Hard to move snow like that
![[486]](https://data.irate4x4.com/avatars/m/0/94.jpg?1700178133){kind=avatar}
[486]
smell-o-vision
they gonna rot out anyways
sdmuleman
Red Skull
back woods
Well-known member
New front tires (heavier load range), new steel roof welded on and new exhaust. Stack is 3” dia, 1/8” wall, no muffler, 2” downpipe. Sounds good, has a little whistle at idle.
Last edited:
1oddtech
Unknown member
Can you post a link
Edit: It came across my Facebook feed, that machine is ****ed.
Last edited:
6869704x4
Red Skull
Backhoe?
I dont have one that I can see
billybob_81067
Redneck
Didn't realize until the snow pic that it's an open station. Better park that thing in a nice shed to keep the cab stuff all fancy!Backhoe?
I dont have one that I can see
back woods
Well-known member
Hears how the 850 sounds, not bad for a 3 cylinder.
ToughBowtieTruck
Not the memories we may want but ones we'll have.
Updates on my IH 656:
So I got some USA King Kutter pallet forks
Then came the 3/8 quick attach plate for the Bucket:
After that my Westendorf quick attach showed up:
And today my nos 2020 model year PG12 came in:
Now I just need my Cross sbaf22 valves to show up.
So I got some USA King Kutter pallet forks
Then came the 3/8 quick attach plate for the Bucket:
After that my Westendorf quick attach showed up:
And today my nos 2020 model year PG12 came in:
Now I just need my Cross sbaf22 valves to show up.
sdmuleman
Red Skull
Somewhat baffling to me. May be camera angle, but looks like cab doesn't sit square and exhaust stack is mangled in addition to obvious backhoe damage. I can't figure out the duct tape on cab though - assume cracked windows but they all look okay. Why is bucket pin missing/broken? And where/how did the hoe get hit to break like that?
Depending on what's going on with cab, front end and drivetrain is probably still good, and looks like most of the backhoe is still usable for parts. Owner is delusional about value, but it's not as ****ed as many I've seen.
These 2 are more commonly what I see around here for pricing. Lots of ****ty things about liking here, but at least equipment and machinery prices are generally decent.