Sceep
🖕___ 😆___ 🖕
sounds like a heavy grit sand blaster
Pretty much.
This is my buddies.
Shoots at 575 fps and 3500-4000 rpm with .20G airsoft rounds
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Random stuff you made.
- Thread starter billybob_81067
- Start date
Pretty much.
This is my buddies.
Shoots at 575 fps and 3500-4000 rpm with .20G airsoft rounds
Yabut, how many minutes?
krugford
Member
Testing out a homemade fly cutter I made on some aluminum. I used a blank R8 shank and made the arbor and carbide insert bar myself to use SEHT inserts. Put in some Korloy aluminum inserts tonight and went to town.
Tool holder, this one really stressed my math brain with the compound angles and tapered wall to match the insert.
I am beyond happy with the results.
Tool holder, this one really stressed my math brain with the compound angles and tapered wall to match the insert.
I am beyond happy with the results.
Flatbed
Web Wheeler
Nice finish. Aluminum can be tricky.
chaplinfj60
Well-known member
so i did some work on my trailer. i had a small pick up bed tool box but it kinda got in the way of the tie down. i also had a 2 foot wide 4 foot long tool box drawer. so i put that under the tool box and bam. more storage and more room for tie downs.
- Joined
- Sep 9, 2021
- Member Number
- 4387
- Messages
- 3,606
Those PackRats are handy
chaplinfj60
Well-known member
yep i had that thing for 6 years i bet finally used it. hahah
Bonus hole?
I make hole.
![[486]](https://data.irate4x4.com/avatars/m/0/94.jpg?1700178133){kind=avatar}
[486]
ugh, that guy again?
don't drop your phone
your fingers go tingly when you're holding anything over such a hole?
Mine do even when I'm just looking in a drum bung with my flashlight, don't wanna drop the damn thing
your fingers go tingly when you're holding anything over such a hole?
Mine do even when I'm just looking in a drum bung with my flashlight, don't wanna drop the damn thing
You mean more tingly than normal?
PAToyota
Red Skull Member
A bit of lathe work. Knurls are to designate the left-hand thread ends.
Johnny Longrifle
Slow learner
My front line tractor (don't fucking laugh, it's the best one my dad left me) would barely pull itself out of the shed the other day. Of course haying season is upon me, and I really need that machine, but it needs a clutch unbeknownst to me until now). So I brought it to my shitty little shop that at least has a concrete floor. It's not flat or level, but it's barely better than dirt and offers some shade.
Well my idea of using an engine hoist on the front half was not gonna work.
So, I had a bottle jack, some scrap 2" square tubing, and these aluminum wheels with bonded rubber tires ( that came from a ski tuning machine I scrapped years ago).
I farmer welded it all together and got it in place, with an old hydraulic jack from a Harbor Freight pipe kinker to hold up the back end.
I have to say, it worked surprisingly well. I can only imagine how well it would work on a good floor.
Well my idea of using an engine hoist on the front half was not gonna work.
So, I had a bottle jack, some scrap 2" square tubing, and these aluminum wheels with bonded rubber tires ( that came from a ski tuning machine I scrapped years ago).
I farmer welded it all together and got it in place, with an old hydraulic jack from a Harbor Freight pipe kinker to hold up the back end.
I have to say, it worked surprisingly well. I can only imagine how well it would work on a good floor.
Johnny Longrifle
Slow learner
And so ya, this is what my dad left me to deal with. 
clodhopper
Get off my lawn, punk!
Nice. I have a backhoe I need to split sometime. Was thinking of cobbling a splitting track and trolley, but I like your tricycle better.
dentedsub
Haberdasher
New mailbox post
WunTon
Active member
- Joined
- May 19, 2020
- Member Number
- 288
- Messages
- 42
I posted a few in progress shots of this a while back but here are the finished/installed pics of the solid walnut sink I was commissioned to build.
Before
And after with new fixtures and paint to give this builder grade half bath a little life!
It sits on a floating vanity with a small drawer to stash a few rolls of shit tickets and clean towels. Behind the drawer is the controller box for the touchless faucet. I had to build the draw in a "C" shape to clear the sink drain plumbing.
Before
And after with new fixtures and paint to give this builder grade half bath a little life!
It sits on a floating vanity with a small drawer to stash a few rolls of shit tickets and clean towels. Behind the drawer is the controller box for the touchless faucet. I had to build the draw in a "C" shape to clear the sink drain plumbing.
Attachments
Wades_76_cj7
RZR guy, NO I am not gay..
dude that looks freaking awesome.. 
RunningProblem
Red Skull Member
- Joined
- Sep 12, 2020
- Member Number
- 2860
- Messages
- 2,741
DAMN!
roundhouse
Red Skull Member
- Joined
- Aug 7, 2020
- Member Number
- 2622
- Messages
- 33
WowI posted a few in progress shots of this a while back but here are the finished/installed pics of the solid walnut sink I was commissioned to build.
Before
And after with new fixtures and paint to give this builder grade half bath a little life!
It sits on a floating vanity with a small drawer to stash a few rolls of shit tickets and clean towels. Behind the drawer is the controller box for the touchless faucet. I had to build the draw in a "C" shape to clear the sink drain plumbing.
Details please !
How you made it
How you waterrproofefwd it
WunTon
Active member
- Joined
- May 19, 2020
- Member Number
- 288
- Messages
- 42
Build details are back on page 77!
Clb
another toyota from P.R.K
Lets see china do that quality of anything...
Nice work man
Nice work man
45acp
naw man
Clb
another toyota from P.R.K
Gasping for air over here..
PAToyota
Red Skull Member
Yeah, anyone who bitches about difficulties doing a clutch on a car or truck needs to try a tractor...
Did a run of show bars for dune buggies...
Swinging ten foot lengths of 2"x0.120 around gives you a workout!