Post your ****box here

[aframedweller]

New here, but it looks like you guys are ok with ZJs.

 

[Oatmealman]

Here's my pile,currently working on it,10 bolt front/14b sf rear,sbc,sm465/np205. Built it when I was 17 and it sat in Wisconsin for 15 years until i moved back and started redoing all the hacked **** i did when i was younger, im currently 30 so its been a long time lol.

 

[Rugger99]

Here is my "****Box"...
1995 YJ 2.5L/Auto trans/Atlas II
3 link front/ 4 link rear with 14" Fox Coilovers
Toyota axles (Diamond housings , 5.29 , Detroit front , Spool rear, Full float rear axle, RCV shafts )
38" TSL Sx w/Allied beadlocks.

Sits fairly low, top of cage is at 72"

 

[shaggyjim]

Wrong section

I cant help but feel like this photo is sandbagging just a little bit to be in the **** box section.

 

[Cowboy63b]

'81 j20. Not much left that was from jeep though. 60/14 bolt, 5.3/4l60e/np241, 3 link front. Finished the 3 link in early 2019 and its completely changed this rig for the better. No more unpredictable leaf spring unloading, just keeps climbing.

I see you're a connoisseur of old garbage as well. we need to link up when I drive my J20 to Houston.

 

[akguy09]

1979 J-10

 

[GFY Racing]

Here's my pile,currently working on it,10 bolt front/14b sf rear,sbc,sm465/np205. Built it when I was 17 and it sat in Wisconsin for 15 years until i moved back and started redoing all the hacked **** i did when i was younger, im currently 30 so its been a long time lol.

Ok so now I don't feel so bad about my 10 year "never ending" project

 

[Oatmealman]

Ok so now I don't feel so bad about my 10 year "never ending" project

My wife always tells me it will never end

 

[NickMaul]

Still working on my turd box

 

[Pablo]

My currently disassembled bolt-on ghetto-fab fantastic roached out AZ interior 94 XJ with crappy stock axles:

This chingelish sticker from an ebay headlight relay kit stayed on the XJ fender for a couple years before the pressure washer removed it:

The 64 Wagoneer. A current running half dis-sassembled and 1/8 completed Heep that I would be working on now if it wasn't colder than Ashely Biden's cooter in Joe Biden's shower out in my workshop:

The 67 for Parts N Stuff, a future project I will probably die before getting back too:

 

[fl0w3n]

Lovin the inspiration

 

[DFW Rusty]

I have 3 jeeps and 2 of them are **** boxes... My third literally has a thread called "I picked up a ****box", but it's becoming not a ****box (link at the bottom of my post in my signature).

First is a 1978 CJ7- Bought it just before Thanksgiving, got it for cheap, but now I know why. The engine is a ticking time bomb, it has so much blow by that it blows the dip stick out of the tube and the previous owner punched a hole in the valve cover to give it some relief...

Second is a 1978 CJ5- I've had it since 2001. I spend all high school fixing it up, then I was mean as F to it in my early 20's and now it needs a complete tear down and restoration. I just noticed the other night that the head gasket is most likely blown. The jeep is pretty, but everything is ragged the F out on it....

But... Both run and drive and I drive them on the dirt roads around my house several times a week...


My plans for this jeep is rebuild the engine and slowly fix it up and drive the piss out of it... No lift, just cruise it and enjoy it as is. I got a set of white wagon wheels to replace these ugly ass rims... Just need to put tires on them first.

Old pic of my cj5... Not much has changed other than it has a smittybilt 9.5 winch on the front right now and I put a new bestop on it 2 years ago.

 

[2JZ]

Went to the scrapyard about 8 years ago, but the Tetanus Shot was a blast to beat down.

 

[Mike Honcho]

Lovin the inspiration

Is that pilot rock trail San berdoo/ lake Silverwood?

 

[fl0w3n]

Is that pilot rock trail San berdoo/ lake Silverwood?

Nope, first two are Mirror Lake in shaver area. Last one is messing around after I built it at Hollister

 

[Coyote]

 

[KB6Chris]

Here's my pile o'parts

91 YJ, 4.0, AX15, 231 SYE. Dana 50 5.38 welded crossover steering, Sterling 10.5 5.38 Detroit, 38x15.5 Toyo's, Rubicon Express springs. Mostly cruise the local creek and pull SXS's out

 

[SteveJenkins]

Waiting on some parts…

 

[Rockwood]

It’s a pile, that’s for sure.

 

[fl0w3n]

****box I’m doing for a customer. Should be pretty sweet all done. Getting 16” 2.5 airs.

Did you ever finish this / have finished photos?

 

[Frodo]

My ****box from a few years ago. 1975 CJ5, 232ci, T14, Dana 20, Dana 30 front, and Dana 44 rear. Only modifications are a 4.5" lift, 33" tires, and a hydraulic clutch after the body started flexing too much for the mechanical linkage to function. View attachment 889286

About how it currently sits waiting on a rebuilt engine, trans, and tcase. I plan on rebuilding a lot of the body too.

 

[SHARPMACHINE]

One of my biggest goals in the future (hopefully semi retiring in a few years) is to have a ****box to enjoy.

I love seeing these rigs!!

 

[Byro]

Did you ever finish this / have finished photos?

4 years ago. It’s been passed around through a few different people since then.

It worked well.

 

[BiggusBuilt]

I guess I'll post my junk here as well. I really need to update my profile on the work I did to get it out of the garage.

 

[Sandy Johnson]

I guess I'll post my junk here as well. I really need to update my profile on the work I did to get it out of the garage.

****box pro tip- it'll drive a lot better if you roll yours 90* clockwise

 

[ForgedOffRoad]

I guess I'll post my junk here as well.

Hey, I have one like that from a few weeks ago...