Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Boomtacoma01
3rd Coast
Here is my 85 Xtra Cab. Cab is going away soon and replaced with some tube, along with a Turbo Propane swap and rework the front 3 link to lower it about 4 inches.
94toytruck
Eastcoast crawler
Just stripped this for blast and paint.
MT-TOY
Where's the comet?
That a Top Shelf chassis? Sick ass buggy. The pig is equally awesome.
makemeknowit
Kwisatz Haderach
Trashed the cv joint last trip. Snagged one off Ebay. Waiting on High Desert to call me back so I can get a legit front shaft built, been running a square for 4 years, ready to lose the cv and run single joint on both ends of the front shaft. Keep the square as a spare.
J Mack
Member
- Joined
- May 20, 2020
- Member Number
- 484
- Messages
- 18
Thank you, yes it's a Top Shelf.
MT-TOY
Where's the comet?
Slander
Team no stickys
Let's give this a shot. Good to see some familiar rigs and users. Here's my current projects - What's left of an '82 pickup known as Piggy (It's 5 O'Clock Somewhere build on the late PBB) and my 2000 4Runner (Fiona or Project Fuki) that I got for $700 and am slowly building into a DD-able all-around wheeler.
I enjoy your wheeling vids on the youtubes, nice trail wheeling footage and good editing!
Evergreen12
Member
Engine let go as soon as I got back from UA. Just finished swapping out the motor with a new one and getting it broken in. Needs a little more power, I see a cam swap and a custom chip for the TBI in my future. Currently working on skinning the roof in aluminum and ditching the crappy bikini top. Got a million little things I’m planning to do. Other than that, just generally enjoying driving the shit out of it. It was even my daily for a couple weeks there.
Lilyota
RIP 7/22/2023
Bad Karma
Active member
Doing a 3.4 swap into an '87 4Runner, finished up a SAS on a '91 xtracab pickup, you know, the usual stuff...
YotaAtieToo
Thick skull
Lilyota
RIP 7/22/2023
Moonrocks is a blast. Just be ready to break everything and completely destroy any sheet metal you have.
DOOD
Did you even see my rig
YotaAtieToo
Thick skull
GLTHFJ60
Stupid is as stupid does
Working on painting and armoring my FJ60.
CreeperSleeper
I bRoKe It
I haz things....
Last edited:
Slander
Team no stickys
2002 5 SPD 3.4
dual cases, lefty rear case with 4.7s and chromo goodies
flipped fj60 front axle 5.29s, aussie locker
RCVs
Stock fj62 springs RUF with bilstein 7100s and air bumps
Frame chop
Fj80 rear 5.29s spartan locker
all poo springs with bilstein 7100s
37" pro comp extreme mt2 on pro comp 17" beadlocks
No trailer
Wulf
Well-known member
rugburn
Patriot
been there, done that....
Last edited:
JoshD
Axle snapper
Well, my wife drives a lifted 4Runner.:rolleyes:
J.Cole
Red Skull Member
1992 4Runner. Last year I dropped a fresh body on and built some new bumpers for it. Rebuilt 3.0, built Toyota axles, built Toyota dual cases, 37s with beadlocks. Typical Toyota build
Grronk
Somewhat Retarded
Dig the 4runner! Definitely recognize it from Colin.Smith.Slo's videos, I'm just over the hill from you guys
Dig the 4runner! Definitely recognize it from Colin.Smith.Slo's videos, I'm just over the hill from you guys
Nice! Maybe we will meet up out on the trails sometime!
Malburg114
Well-known member
- Joined
- Aug 26, 2020
- Member Number
- 2780
- Messages
- 276
I don’t post much. Mainly lurk. Getting ready to 3 link the front with a 609. For now though it’s wheeling season here in the southwest.
Toyota231
Lost in a sea of jeepers
Guess I'll throw in the crap I'm building, or trying to build. Had an accident over a year ago, broke my back and injured my neck pretty severly, workers comp is doing a fine job of screwing me so the surgeries I desperately need keep getting put off and I'm just as hurt as the day it happened. So progress is slow, I just get to sit in the basement and stare at my junk, and search the web looking at other people build stuff and wheel.
Anyways some specs,
1987 2wd pickup, Dana 44 front 5.38 spool, taco 8.4 rear 5.29 spool, ruf's front, ford 52's rear, 38.5 tsl's on recentered hummer beadlocks. 22re turbo and propane, 5 speed and stock transfer case for now. Built on a less than ramen noodle budget, almost 4 years going, with a lot of parts I traded work for. Not anywhere near done but I hope to get it rolling soon, it's been over 10 years since I've wheeled and it's well overdue.
Anyways some specs,
1987 2wd pickup, Dana 44 front 5.38 spool, taco 8.4 rear 5.29 spool, ruf's front, ford 52's rear, 38.5 tsl's on recentered hummer beadlocks. 22re turbo and propane, 5 speed and stock transfer case for now. Built on a less than ramen noodle budget, almost 4 years going, with a lot of parts I traded work for. Not anywhere near done but I hope to get it rolling soon, it's been over 10 years since I've wheeled and it's well overdue.