Intros.

[FleshEater]

Bought my first Toyota ever this year. Clean 2008 4Runner after lots of recommendations from here.

Goal is to keep it as reliable as possible to make trips from Pennsylvania to Utah, Colorado, Wyoming, Arizona, and wherever else we end up. Mild, mild off pavement exploration for the family. Basically too pussy for here.

Just did new brakes/rotors/hoses all around and put some Icon coil overs on. Need to drop the front about 1.5” to accommodate gear in the rear and get it aligned. This winter I’ll be tearing into it a little more. Colorado trip in 3 weeks and counting.

 

[Devestater]

I’m a longtime Pirate lurker from early 2000's.

Used to work at Inchworm Gear for 5 years ('04-'09). Currently working at my family's 37+ year abrasive blasting, and powder coating facility.

I've had my rig Eeyore since 2005. Got it bone stock, with the motor in the bed. Have done everything to it besides the flatbed, and front bumper. Link to pictures of progression from '05 to '12. Vijeo of me going up soup bowl.

• Toyota RuF
• Chevy 63's
• Twin Cases w/5:1 in rear case
• Detroit Rear
• Posi Front (looking to upgrade to ARB)
• Longfield's from Bobby (rip) w/chromo hub gears
• 5.29's

Couple years ago, took it upon myself to redo some of the shortcuts i did with Eeyore over the years: changed all red wires to different colors, painting the truck, powder coating flatbed, do-it-yourself bed liner in the cab, winch, etc... Life gets in the way, i need to rebuild the front axle, plus some new wheels/tires, so I can take it to KoH next year with some friends.

 

[Buckthis]

Hey All - stopping in to give a brief intro to my rig. I don’t have social media so I’m contemplating on documenting my build and trip reports on this forum.

I’ve finally completed phase 1 of my dream build which is based off of the first gen Tacoma platform. This is my 2001 Tacoma double cab and the specs currently are:

Front Axle: Custom Passenger Drop 14 Bolt with Super-Duty outers, Yukon 5.38 gears and grizzly locker

Rear Axle: 14 bolt with Yukon 5.38 gears and grizzly locker

Transfercase: Atlas 4 speed with 3.8 low gear

Transmission and Motor: stock

Front Suspension: Custom Rockhound 3 link with Fox Factory 2.5x12 DSC coil overs and hydraulic bump stops

Rear Suspension: Chevy 63s and Fox shocks

Wheels and Tires: Raceline Beadlocks with 43” Super Swamper SX tires

Misc: Warn Zeon 12S, Tom Woods Driveshafts with 1410 joints, PSC hydraulic Assist with custom double shear steering arms, custom tube bumper, 4x Innovations rock sliders.

Here’s when I first brought it home:

Here is how it sits now:

We just completed the initial shakedown run and the truck definitely exceeded expectations.

I built this rig to be able to enjoy the Rubicon and that dream will finally become reality in about a month. Following a summer of wheeling the next round of mods will include:

Install the brand new Gen V L83 with upgraded top end work. A built 4L70, interior cage with integrated bed cage/spare tire carrier, and possibly entertain linking the rear suspension.

Looks goood, I’m just east of Carson City 🤙

 

[Vhd44]

Looks goood, I’m just east of Carson City 🤙

Thanks! I just saw your 4Runner in this thread and it looks like a beast - nicely done!

If you ever want to get together for some local runs, let me know 👍🏻

 

[thomas808]

Hey guys.

Just found out about this new forum. Pretty stoked on it!

Posted my build on pirate under the same username a while back. Happy to be getting back on here with ya'll.

My rig is a '98 Tacoma with a 2uz swap, 3 link front with Ruffstuff 9.5LC diff front/Hellfires and rear leafs/antirock on an FZJ80 rear. Dual cases all the goods. Aloha !

 

[Seth_PDX]

Hey everyone,
Slowly getting accustomed to using the Forum.
Purchased this '79 back in 2018 then had a kid. Finally putting some work into it now.
Upgraded to high steer, Spartan locker in rear, some gifted 33s, TG Power Flow steering upgrade.
Currently putting together 4.7 tcase. Big laundry list of upgrades for this rig.

 

[Seth_PDX]

build thread would be great if you haven't already started one

Thanks lagunaMS, I wasn't sure if anyone would care since I see so many other great builds. Self-conscious I guess, I'll get something going.

 

[IowaOffRoad]

Thanks lagunaMS, I wasn't sure if anyone would care since I see so many other great builds. Self-conscious I guess, I'll get something going.

Nobody’s build is exactly the same so even though you think everyone has seen it before, they haven’t.

 

[Bull08]

Just found the new forum. Currently have a 2004 double cab Tacoma. Supercharged, dual cases, 3 link front, 4 link rear. About to swap out the trail gear axles for a set of 1 tons and 42's. Any pointers or advice is welcomed.

 

[chaplinfj60]

Just found the new forum. Currently have a 2004 double cab Tacoma. Supercharged, dual cases, 3 link front, 4 link rear. About to swap out the trail gear axles for a set of 1 tons and 42's. Any pointers or advice is welcomed.

pointers,

hmmm

i love my low gears in my 60s, but a super charger maybe funnnn when you dont have to worry about breaking a axle..... :)

 

[ryantowry_81]

Hey there guys,
Just found the forum, I have been hiding on MUD lately. great to see some old faces.

here are my two current shitbox's:

91 fj80- 37's/ 5.29's/ lockers/ kid hauler

73 fj40- 40's/ 5.29's/ lockers/ SBC/NV4500/Atlas/ front 3 link inprogress.

and my past rig back when i was on pirate a bunch:

84 ex cab- D60/14B/ 42's/ hydro assist and TBI 4.3L

 

[IowaOffRoad]

Hey there guys,
Just found the forum, I have been hiding on MUD lately. great to see some old faces.

here are my two current shitbox's:

91 fj80- 37's/ 5.29's/ lockers/ kid hauler

73 fj40- 40's/ 5.29's/ lockers/ SBC/NV4500/Atlas/ front 3 link inprogress.

and my past rig back when i was on pirate a bunch:

84 ex cab- D60/14B/ 42's/ hydro assist and TBI 4.3L

Nice! Can you adopt me?

 

[Stingray]

Hey there guys,
Just found the forum, I have been hiding on MUD lately. great to see some old faces.

here are my two current shitbox's:

91 fj80- 37's/ 5.29's/ lockers/ kid hauler

73 fj40- 40's/ 5.29's/ lockers/ SBC/NV4500/Atlas/ front 3 link inprogress.

and my past rig back when i was on pirate a bunch:

84 ex cab- D60/14B/ 42's/ hydro assist and TBI 4.3L

Good looking Stable of rigs

 

[ryantowry_81]

Good looking Stable of rigs

thanks but the nicest of the three is no longer mine. There is also more weight in duct tape in them then tires i would imagine.

 

[Spvrtan]

Hey, all. Just found out about this community just now after being on Pirate and Mud for years. I got a 2014 Tundra that has a Frankenstein'd lift/suspension setup on 40s (soon 42s).

I'll try list off what comes off the top of my head right now.

• Supercharged
• Nitro 5.29
• Rear ARB locker
• 40" Trail Grapplers
• Camburg +2.5" arms up front
• BDS +4.5" bracket lift
• Rear airbags and Atlas leafs
• Rear winch
• Ghetto flatbed
• Fox 2.5 coilovers up front

 

[simmons3067]

 

[Claytaylor17]

Recently found out about the form. 🍻
Fordyce 10.11.21

 

[Oddball]

Not really much yota left. Custom front leaf hanger only bolted in at the moment. Rears up front with boomerang shackles. F150s out back. Dodge D60/70U axles with 354s. Calipers ground to fit 15s so I can run 38s from my last all-toyota rig. 5.3 with mild porting and chamber work. Gapped rings. Drilled pistons for proper scavenging. Timing chain dampener and aluminum barbell from summit. Shimmed oil pump and drilled/ported oil galleys. New main and rod bearings. Stock cam. Gt45. Holley terminator X. Billet flywheel and clutch from centerforce. Chevy Nv4500. NWF 205 eco box. Big bearing 205 from behind a getrag. Wheel base is around 128-129". Planning on 16" shocks up front and 12s in the rear. It's a work in progress and the parts list is still huge. Will be fitting the engine soon and building a removeable dog house/console.

 

[Shitboxtoyota]

Here from Oregon
1994 Toyota pickup 22re turbo propane, dual cases with 4.7 full exo cage with boat sides and built Toyota axles

 

[simmons3067]

Here from Oregon
1994 Toyota pickup 22re turbo propane, dual cases with 4.7 full exo cage with boat sides and built Toyota axles

Do you have any more info on your turbo set up?

 

[slveryotabuggy]

My shet box.
22r
4 speed
single 4.7 case
9.5 front rcv
ifs rear
43" sticky micky

Built to look like a lizard but for a bigger fellow. So far only breaks have been a couple u joints, 1 birf, and i broke a weld on the crossmember.

 

[Seaskihunt]

New here. Been lightly wheeling a R50 Pathy but it's on DD status now. I picked up a 92 Toyota Pickup from my grandpa.
It's almost too perfect to cut up and get trail ready.
46k on the ODO.
Once I get it out here to WA, I'll be able to get started!

Eta- 22re 5 speed
Apparently grandpa bought it from my late uncle. He bought it from a guy in OR and drove it to MN. It came with a flatbed but my uncle swapped a factory bed.
This info is coming real time from my aunt.

 

[tac1]

I bought this 4runner based buggy over the winter. 22r on propane, 5spd, dual cases with stock gears, 8" toyota axles. Overall it is in pretty good shape, needs some maintenance, minor work, and I want to setup the rear area for my tools/spare parts. I'll start a build thread when I get it in the shop.

 

[chaplinfj60]

thats a sweet ride dude.......

 

[chaplinfj60]

I bought this 4runner based buggy over the winter. 22r on propane, 5spd, dual cases with stock gears, 8" toyota axles. Overall it is in pretty good shape, needs some maintenance, minor work, and I want to setup the rear area for my tools/spare parts. I'll start a build thread when I get it in the shop.

looks like you got a bunch of room behind the seats for creative tools and such. maybe cooler rack above tanks and when needed to change out it folds up.

 

[chaplinfj60]

oh snap, i just realized i never posted in here here is my buggy, 22r on propane that just got the turbo added last week.

 

[tac1]

thats a sweet ride dude.......

Thanks, I watched it for sale for a long time surprised it didn't sell, the fab work is really well done on it and from the lack of dents and damage I don't think it has been ridden much. It has passed through a few owners from the original builder so some of the parts list is a bit unknown. I'm excited to start tearing into it.

 

[cchambers13]

Haven't really "introduced" myself here. Long time pirate/mud member and lurker on here

Built my 2nd gen a decade ago and have ran trails all over the eastern US. Usual 4in spring SAS, 5.29s/elockers, Inchworm dual cases and 37s. Was pretty 10 years ago... not so much anymore.

DD is an FJC 6mt with SAW 2.5" coilovers up front, full Budbuilt skids, Expedition One and MT bumpers on 33s.

Backburner project is a clean 2nd gen 4runner rolling chassis that will either be a body donor to the crawler or get a 5cyl turbo Volvo whiteblock setup.

 

[vegask]

Been out of the game for many years, was wondering where all the pirate people went to.

Anyways, this is my rig. a very low lifted solid axle 97 4runner. 4.7 crawl box, twin stick FJC case, diamond housing, 4.88 gears, caged and currently on 35s. Bumpers are my own creation. 37s and beadlocks coming later this year.

 

[Shitboxtoyota]

just relized I never introduced myself here my truck is a RHD toyota truggy linked front and rear Dana 60 and 14 bolt 22re turbo on Propane 39” stickys truck is a lot of fun I’m also from PNW (Oregon)