Ford Super Duty Parts

[DF Fabrication]

Since were new here figured we let folks know some of the parts we offer.

For the Ford Super Duty axles we have a few components that may interest you

99-04 High steer Arms 7075

SuperDuty High Steer arms 99-04

These are our high steer arms for the Ford SuperDuty KnucklesThey are machined from solid 7075 Aluminum. Retained with 6- 1/2" bolts as well as a double Keyway.The arms is designed to allow the user to either run a tie rod end or utilize the factory knuckle TRE location and install the arms in...

dffabrication.com

05+ High steer Arms 7075

SuperDuty High Steer arms 05-12

These are our high steer arms for the Ford SuperDuty Knuckles They are machined from solid 7075 Aluminum. Retained with 6- 1/2" bolts as well as a .600 Keyway. The arms is designed to allow the user to either run a tie rod end or utilize the factory knuckle TRE location and install the arms in...

dffabrication.com

Sterling 10.5 Factory Elocker

Ford Sterling Rear Axle Electronic Locker (E-Locker)

Ford Sterling Rear Axle Electronic Locker for the 10.5 rear end. Can be used with all gear ratios. We also have the optional Pigtail and Housing connector.

dffabrication.com

Light weight Brake kits for F250,350,450 and 550

Ford Superduty F250/350 05'-up Dana 60 Lightweight brake kit

Ford Superduty 05'-up Dana 60 Lightweight brake kit. 55LB WEIGHT SAVINGS This kit was designed to provide excellent braking for your off road vehicle. Our brake kit utilizes high quality parts as well as saving weight. The 4 piston Wilwood caliper offer superior strength with innovative design...

dffabrication.com

Front Full hydro ram mount with skid

Ford SD Dana 60 front Full hydro ram mount W/ skid plate

Ford SD Dana 60 front Full hydro ram mount W/ skid plate Ultimate strength combined with functionality. This full hydro ram mount is the answer Ram mount components are 1/4" material and the skid is 3/16" material. The skid is a removable component for easy access to the front Diff cover. The...

dffabrication.com

 

[BigUglyFord]

That's cool, I'm looking todo a 03 60 right now. Do you have specs available so we can have the machine work done local? How do we have DFF fab do it?