Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
What kind of valve are you using? Don't worry about a larger tank, a small tank with higher pressure will get it done with a handheld barrel. It takes a really long barrel to take advantage of a large tank because that ball is long gone before the volume of air is useful. A 20oz CO2 tank size accumulator with a 1" valve will boot a fucking a loooong way at 300 psi.I clocked it at REALLY FUCKING FAST
All the talk of making the ball fit the tube better etc. it does not matter. It will send balls out of sight.
I’m ordering a tank right now.
When I said tank I meant the tank and valve from the tire bead blaster, they come together.
When I said tank I meant the tank and valve from the tire bead blaster, they come together.
Also ordering glow in the dark golf balls
you had to include a link - fucker, now I have one on order 
Those are amazing handheld mortars for the money, huge volume right now! Dial in your barrel now and move up to higher pressure later. Like a fast burn rifle powder, it's finished in the first few milliseconds.When I said tank I meant the tank and valve from the tire bead blaster, they come together.
Also ordering glow in the dark golf balls
Believe Chrono required metal.Any chance y'all could chronograph it next time out?
![[486]](https://data.irate4x4.com/avatars/m/0/94.jpg?1700178133){kind=avatar}
only some of them, the ones with the screens sticking up do it optically
it's kind of an odd size but you can get straight pieces in 60" lengths from Summit racing and Amazon.
What’s the id? Want me to turn the adapter?1-7/8" 16 gauge exhaust tubing fits a golf ball just a bit tighter than 2" .120 wall and is much lighter.
You can also get it in SS if you are feeling fancy.
Also the weld seam is super smooth on the piece I got.
That would be sweet, should I pick up an 1-1/2" X 3" pipe nipple and bring the barrel by your place (with your wrenches)? Send me a text and we'll work out a time.
Negative. They just need a solid object to pass through the two laser fields they create. If you know anyone who reloads ammo it would work with a golf ball just like it does a paintball.Take sure you don’t shoot the chronograph.
cool
Hairspray / ether powered guns make something like 20 PSI, which ABS is fine for. I'd say PVC is a minimum.Figured out these have more PSI than my old ether-powered spud gun, going to pick up a length of 1-1/2" ABS & a slip x MIP adapter at Homeless Despot. Now I can chase the turkeys all the way up the hill from our back deck
50 PSI to possibly 90 PSI, depending on fuel and stoichiometry. We used starting fluid, and the occasional spot-on or slightly lean mix sounded like low-base 12ga
Agreed
Meh, personal preference. We did ABS & didn't die.
An argument as old as spudguns.50 PSI to possibly 90 PSI, depending on fuel and stoichiometry. We used starting fluid, and the occasional spot-on or slightly lean mix sounded like low-base 12ga
Agreed
Meh, personal preference. We did ABS & didn't die.
I hate how PVC fails in a brittle / catastrophic fashion.
1-1/2" ABS bursts above 400 PSI and I'm OK w/ a safety factor above 2:1.
- I'd say faster than the best ether-powered shot I remember. Took a few shots out back toward open area & it's loud-ish (like low-base 12 ga.), smacked the ground over 300' away 40' above me on a hill. After 4 shots, I gave it a rest before the neighbors thought I was blasting bird shot.
I found an old chrome exhaust tip that should fit the tip of my barrel nicely, might even give it some speed holesOne last "mod": 30 year old mini Flowmaster stickers on valve block
