J.S.
Active member
- Joined
- May 28, 2020
- Member Number
- 1634
- Messages
- 26
2017 Ram 3500 with a Mercenary Offroad front bumper and a Warn M12000. Well...the winch is mounted, but the control pack was going to hit the intercooler. Has anyone relocated the control pack under the hood, then moved the wired remote plug in to an accessible spot? I had to clock the freespool lever 180* to get it to clear.
Under the hood is pretty busy and there's not much room for the control pack. Warn has a wireless remote kit that might be my best answer but the control pack still needs a home.
FWIW:
Emissions tuned, RevMax fully built Aisin trans, 35/12.50/20 Razr MT, swapped r&p to 4:10, S&B intake, Banks grid heater delete and high ram elbow, and the winch and bumper.
Truck is my 3-4 day a week driver, tows, etc.
Under the hood is pretty busy and there's not much room for the control pack. Warn has a wireless remote kit that might be my best answer but the control pack still needs a home.
FWIW:
Emissions tuned, RevMax fully built Aisin trans, 35/12.50/20 Razr MT, swapped r&p to 4:10, S&B intake, Banks grid heater delete and high ram elbow, and the winch and bumper.
Truck is my 3-4 day a week driver, tows, etc.