“Brophy Jeep” Street Legal Ultra4 4500 class CJ6

[Rockchump]

Mae steering arms.

 

[Rockchump]

A little about the build process the pass side steering arm is 1/8” 4130 with 4130 Weld washers
The driver side is just 1020 3/8” plate with 4130 weld washer.

 

[Rockchump]

Here is the final product of frenching in the lower links.

 

[Blase]

Got any more angles of the frenched lower links?

 

[Rockchump]

Here is the final truss and ram mount.

 

[Rockchump]

Got any more angles of the frenched lower links?

It was boxed in then the guest/ramp added so the frame is sealed off and extra ribbing added.

 

[Rockchump]

Here is the condensed version of the steering and track bar. It was mocked up but I did not get a chance to cycle it.

 

[Rockchump]

Seat mounts for the dual heated faux Ostrich PRP Comp Highback Podiums!!

 

[Rockchump]

This was as far as I got on the steering. First mock up.

 

[buc4x]

what pitman arm is that?

 

[Rockchump]

what pitman arm is that?

It’s the one that came from PSC in their 4500 class steering kit.

 

[Rockchump]

what pitman arm is that?

 

[buc4x]

Thanks for the info!

 

[Rockchump]

This is what defeat looked like July 2016 when I pulled it out of the shop. I would sit in storage for 6 almost 7 years until 2023 when I brought it out to start trying to make simple progress. Then eventually bringing it to SoCal to get finished.

 

[Rockchump]

This is what defeat looked like July 2016 when I pulled it out of the shop. I would sit in storage for 6 almost 7 years until 2023 when I brought it out to start trying to make simple progress. Then eventually bringing it to SoCal to get finished.

 

[Rockchump]

Those healers are from 2011 and 12 years later I’ve never put a single bit of air in them!! They are dry cracked to all hell that’s why they became mock up tires but they hold air better than any tire I’ve ever seen!!