14 bolt

  1. Gunwalls_Buckthorne

    14 bolt pinion bearing replacement

    1987 v30 SRW….. The birdcage holding the tapered pinion bearing in the pinion broke and allows the bearings to rub when coasting. I know the “right” thing to do would be pull everything apart and set everything up again properly. However, could a guy pull just the pinion out, put new...
  2. 14 bolt parking brake connection..would cables still work OK?

    This is probably stupid simple, and I'm just a dipshit who can't search right... Samurai, 14 bolt axle, 2.5" lift Jeep springs SOA, wheelbase not extended in the rear....looking at ways to keep the center mounted parking brake handle with mechanical parking brakes. Already have a driveline...
  3. Winchested

    14 bolt axle shafts...

    Im sure its been discussed before. But Are second gen axle shafts for 14 bolts all long side interchangeable? Shorts seem to all be the same at 31 5/8, but. The one I installed on my Scout has 37 5/8" shaft (it's the old first gen smooth body design) I just got another junk yard axle...
  4. Top Ramen

    Figured I should post up my current slow build on here. It started with Snowracer tagging me in a add on Facebook for a 1983 sj410k with no papers. Not long after that I picked up another one with papers. It was supposed to be a simple build. You know build a new frame. Add some bigger diffs...
  5. Lilyota

    Replacing 14 mm studs with 9/16 studs in a 14 bolt.

    Does anyone have the part number handy? Mine is buried in a CONEX. Thanks in advance.
  6. 2000 14 Bolt Wheel Bearing Preload

    I have a 2000 chevy van 14bolt that i've replaced the wheel bearings on. Went to throw the hubs on and after getting the wheel bearing preload to 50lbs i still have a bunch of play in the hub (up, down, side to side) I took it apart a year ago and kept the items in a container but im wondering...
  7. LScout800

    14 Bolt c&c hub swap help

    Currently I am putting a 14 bolt under the rear of a scout, and I decided to use a normal srw 14 bolt I already had and use c&c hubs to narrow it a bit so I would not stick the tires way out. Anyways as I was putting it together tonight using some hubs I had gotten from a c&c truck at the...
  8. 3.5" or 4" tube for front steering 14 bolt?

    I'm looking into the possibility of building a front 14 bolt for my K5, but one of many questions I've come up with is should I use 3.5" or 4" tubing? Is there some big disadvantage to going bigger? Busted Knuckle and WOD appear to use 3.5" OD .5" wall and ECGS lists 4" OD .5" wall. These are...
Top Back Refresh