TOMS97ZJ
What?
Getting back into ZJ’s and I am in the planning stages.
Picked up a 98 5.9 two weeks ago. Runs great. Pretty much stock with a little bb lift.
Unlike all the previous jeeps I plan to do this slow and once.
I’m still in the figure shit out phase so I can be talked into doing it different.
8.8’s and 44’s are getting a pain to find.
I’m leaning towards just doing Super duty axles and not worrying about a bunch of aftermarket parts. They should be strong enough stock to handle how I drive.
Less than 2k and I can have both axles complete.
IRO doesn’t make a front truss for these axles so I am looking at Barne4wd.
I emailed both companies to see if this will work with the IRO long arms.
Picked up some 2x6 1/4” thick to make rocket sliders.
Picked up a 98 5.9 two weeks ago. Runs great. Pretty much stock with a little bb lift.
Unlike all the previous jeeps I plan to do this slow and once.
I’m still in the figure shit out phase so I can be talked into doing it different.
8.8’s and 44’s are getting a pain to find.
I’m leaning towards just doing Super duty axles and not worrying about a bunch of aftermarket parts. They should be strong enough stock to handle how I drive.
Less than 2k and I can have both axles complete.
IRO doesn’t make a front truss for these axles so I am looking at Barne4wd.
Jeep TJ, XJ, MJ, LJ, and ZJ, Superduty Dana 60 Axle Truss Swap Kit
If you're throwing a 1999-2004, or a 2005-Up Super Duty Dana 60 in your Jeep Wrangler TJ, LJ, Cherokee XJ, Comanche MJ, or Grand Cherokee ZJ this is the upgrade for you. We designed this kit to install as easy as possible and with as little measuring as we could. Every Component on this truss...
barnes4wd.com
I emailed both companies to see if this will work with the IRO long arms.
Picked up some 2x6 1/4” thick to make rocket sliders.