What's new
By:
Filters

2bbs 2021 bronco build

welndmn said:
I would think it was not so much the .120 wall that was the issue but the lack of supports.
BUT that said, I have rigs with .120 wall sliders and pipe, I actually like pipe more, but that was because pipe was dirt cheap.
Click to expand...
Yep, if my welds hadn't cracked it would have probably held it shape. I think the welds were pretty good but a couple more kickers sure would beef it up enough to where I dont think there will be an issue
 
Did I see you on hwy50 a couple Tuesdays ago? I saw a Bronco this color on 35-37s when we were headed down 50 towards icehouse, but it was too quick to tell anything else.
 
Glad I found a Bronco thread on here! I, like Dirty Jed had the same sliders that weren't working out for him. Swapped to these Califab ones and really like the DOM vs the old style and the kick outs are awesome! They also angle up nicely and can be used as steps to reach the top for cleaning and eventually a rack that might go up there. (Another kid on the way and I’m running out of storage for family camping trips).
 

Attachments

  • 55DB1B78-90BD-4DA3-BCA7-753A23FF2FD0.jpeg
    55DB1B78-90BD-4DA3-BCA7-753A23FF2FD0.jpeg
    1.3 MB · Views: 23
M92PV4U said:
It's one Phillips screwdriver away from being empty, at least it's locked up though :homer:.
Click to expand...
Looool. Thankfully not that easy, it’s got special bolts that are only accessed with the can off which is locked on. Of course you can remove the whole system but yea, it was free. I can’t complain. Anything free is good.

But yea, it doesn’t get much use. I was sent the whole setup for a review awhile ago and left it on. I use the gas when I’m going on recoveries in case they need gas. I’ve actually used it for someone (one time lol). Not something I generally recommend but it gets some use with me for now.
 

Attachments

  • 4781639C-BFD2-4D8A-9DF2-FA8A0CBD7020.jpeg
    4781639C-BFD2-4D8A-9DF2-FA8A0CBD7020.jpeg
    931.4 KB · Views: 26
popo_patty said:
Looool. Thankfully not that easy, it’s got special bolts that are only accessed with the can off which is locked on. Of course you can remove the whole system but yea, it was free. I can’t complain. Anything free is good.

But yea, it doesn’t get much use. I was sent the whole setup for a review awhile ago and left it on. I use the gas when I’m going on recoveries in case they need gas. I’ve actually used it for someone (one time lol). Not something I generally recommend but it gets some use with me for now.
Click to expand...
I meant punching a hole in it:homer:.
 
fl0w3n said:
One of those life scenarios where I was going to say never heard of them, and then I think literally the day after saw a truck bookin it on 280 south and then another one in town in Gilroy
Click to expand...
Either could have been me, haha. I rarely drive 280 but was that week and usually take Masten ave down into gilroy to avoid the scale on 101.
 
popo_patty said:
Glad I found a Bronco thread on here! I, like Dirty Jed had the same sliders that weren't working out for him. Swapped to these Califab ones and really like the DOM vs the old style and the kick outs are awesome! They also angle up nicely and can be used as steps to reach the top for cleaning and eventually a rack that might go up there. (Another kid on the way and I’m running out of storage for family camping trips).
Click to expand...


I know you! You got nice skids plates on that bronco :P
 
Okay I promise I’m not stalking you but today I saw one of your trucks towing a busted Prius with a strap around the bumper through an intersection in San Francisco :lmao:

Couldn’t get my phone out fast enough
 
fl0w3n said:
Okay I promise I’m not stalking you but today I saw one of your trucks towing a busted Prius with a strap around the bumper through an intersection in San Francisco :lmao:

Couldn’t get my phone out fast enough
Click to expand...
Hmmm, haha.

Thay wasnt me but I do know the guy with the old beat up prius.
 
Last edited:
You must log in or register to reply here.
Top Back Refresh