• Check out our new Group Buy Program! We're kicking it off with Baja Designs! $10 Flat rate shipping no matter how much you order!

tcase

  1. 263xhd transfer case issues

    Vehicle: 2003 LB7 Duramax Electric button transfer case Pump rub kit installed about 8 years ago but didnt use 4wd afterwards. The truck runs fine while in 2wd drive but runs into a issue after switching into 4wd. The truck will function and sound fine for 10-40ft till there is a small shock...
  2. SKULLYOTA

    SJ410 vs Samurai Tcase

    I’ve heard both that SJ410 cases are the same as a samurai or SJ413 and that they’re not…. I’m looking at this one on eBay to rebuild down the road for a spare with 6.4’s, but it has the drum ebrake and a 4x4 switch. So I’m assuming this is a 1985 SJ410 case? Some searching i found on...
  3. Pat

    CA Marlin Cralwer built R150 with r151f bellhousing. 23 spline 4.7 gear set, shortshifter, tcase.

    In Nor Cal up near oroville Hey folks. I have a new in sealed bag as it came from Marlin rebuilt r150. I have the receipt for $1950 for transmission alone. Will sell for transmission for $1700 Will not sell anything below unless trans sells first. R151f Turbo bellhousing R151f tailhousing...
  4. total newb

    241 input swap and tcase year verification.

    Helping out a guy i sold a transmission to make his 27spl 241 fit it. So i do not have the case in hand, its 125miles away and he seems mech inclined allthough not experianced. Swore up n down the 241 was from that truck (91gm k1500 d side) so i found him the gear that is SUPPOSED to fit...
  5. Sean

    What Is the Tcase Input Spline Count on an A340F Auto Trans?

    Searched and didn't find anything on this here on IBB. Very surprised by that. I guess the A340F was used in 4 cyl Toyota 4x4 pickup trucks in the US from '85 to '95, in 4 cyl 4x4 Tacomas from '95-2015, in 4Runners from '85-2004, T100s and early Tundras. Apparently, it's not computer...
  6. Sean

    Has Anyone Here Torn Down a Hero Tcase?

    So I have a brand new, never installed, Hero 3 speed case (5.44 and 2.5 ratios) that I want to swap out the input from a TH350 input to a TH400 input as I think (from what little research I've done) the TH400 is about 3 3/8" longer than the TH350 but is markedly stronger. I'm in touch with the...
  7. Sidekicktodd

    CA Sidekick parts trans and tcase patts

    Ringr adapted, pressure plate and machined clutch to fit the sidekick flywheel from trail tough. $500 it’s got less then 1000 miles on it. I ended up going to a 6v and automatic and no longer need this. Located in Rohnert Park Ca I’m not going to ship parts
  8. chaplinfj60

    3d print 205 tcase rubber plugs

    good afternoon, has anyone printed these little plugs for the top of the 205 tcase yet? i think i will try my hand at. just curious if they pop up, or if the iol breaks down the filament or any thing like that.
  9. Ahhfawk

    W56c forward shift tcase

    Im in the process of gathering parts for a mild 93 Toyota pickup build. I have a w56c out of a 90s 4x4 pickup and I have a forward shift tcase unknown what year. The trans and tcase won’t mate together there’s about 1/2” gap between trans and case. The shift rails are hitting the trans and I’ve...
  10. YotaAtieToo

    What's it worth, Rubicon tcase edition?

    Found a 05 4:1 tcase that the front out put is cracked. Just curious if this is worth anything. There is supposed to be a diy eco box available soon that would use these planitarys. I've always thought a 4:1 crawl in front of a 205 was the perfect ratios. Unless someone here needs it?
  11. Mattygwheeler

    Borg Warner 4401 tcase info?

    hey everyone! I’m gathering parts to one ton, solid axle swap, 4wd swap my 2005 GMC 2500 with 6.0 and 4l80e. I have this BW4401 PTO tcase and 4l80 adapter from a mid 90s k3500. There isn’t much info on the 4401 tcase specifically regarding the coil, clutch shift mechanism. I Was wondering how...
  12. chaplinfj60

    1410 or 1350 flange to toyota tcase

    good afternoon all, so currently i run one tons with 1410 ujoints at the axle and toyota joints at the tcase. does anyone make a flange so i can 1410 all the way around? or what is a good solution. i was want to do possible do double card. joint with 1350 as a possible solution because i...
  13. YotaAtieToo

    Samurai tcase thread

    Seems like the last thing that gets replaced in most sami's is the tcase. I still see even buggy type rigs with bigger motors, trans and axles, but often still the little Sami case. Then others say they don't hold up to 32s. I'm curious who has actually broke one, what broke and what it took...
  14. docj88

    Junkyard Crawl!! Possible Dual TCase Build!!

    To preface this post, I did a brief search on Google, Youtube, and this site, but haven't found the exact information I need. I will continue to search but any info or links to articles is appreciated. I have an opportunity to raid a junkyard that is fairly rich in Yota parts but I wont have...
  15. Huntieebooboo

    Atlas cable or linkage shifters

    Picked up a used atlas 3.8 that needs shifters, would like to hear your thoughts on either. Paired to an AX15.
  16. ranger tcase options

    looking at picking up a ranger with a bw1354, just wondering what my doubler options are or if I should look into an atlas? truck will be running 39s
Top Back Refresh