Toyota231
Lost in a sea of jeepers
Curious to see if anyone has turned an 05+ Superduty 60 from driver side to passenger side drop. With the supply of kingpin 60's running out and prices going ridiculous, then being able to pick the 05+ superduty 60 in my area for terribly cheap I'm seriously considering doing one on the next build. Even though I posted in the newbs section I've been building stuff for 20 years, I'm just a person that likes visual cues when problem solving or building, so if anyone has done one let's start a discussion and hopefully some good pics. There are a few things I'm wandering about like getting the diff casting and radius arm mount removal (how much axle tube there is under the casting/ how far the diff casting can be trimmed), and a main concern is does anyone make an axle alignment tool that fits the superduty axle? I've done lots a research and found a small amount of info on the pre 05 axles but nothing on the 05+.