Trailer camera system

OX1

Well-known member
Joined
Apr 10, 2023
Member Number
6356
Messages
172
Bought 8 different rear view mirror/back up-side-truck-trailer/ camera systems.

Settled on this setup.


Things I liked.

1. Not based on an operating system, which would have meant you either have to have it asleep (drawing power the entire time), or it has to boot up (very annoying, like new aftermarket car radios).
2. Can buy extra monitor or cameras (plan on using second monitor inside trailer as a "home" surveillance system, when "camping").
3. Quality is very good when camera moving (some of the other "higher end" systems views, were really blurry, on edges of objects when moving).
4. Lighter than other rear view mirror capable setups, especially the one's with operating systems that were more like small tablets
(can mount this one on stock windshield button).

Things I don't

1. Night vision not as good as some others, but don't trailer that much at night and plan on stadium lighting if backing up/parking in barn or @ campsites.
2. Does not do bluetooth (or other app things), which might have been cool to have GPS up on screen (off phone) from time to time (was not really interested in all the other
app garbage, really, and figured maybe money spent on camera system itself in "development", vs all the other features I didn't want).

McMaster 20 minutes down the road, grabbed a plastic bar to make camera mount for V-nose...


20260119_124921.jpg


20260119_130502.jpg


20260119_134636.jpg


Temp spot for side camera. Really need to get trailer out on road to see if I like it there, but not taking new truck and trailer out in that brine crap...

20260119_125316.jpg


Rear cam. Still not sure if I wanted it up high, or down near lisc plate area.

20260119_142700.jpg


Not a lot of space on the sides, especially with latest 4 post on the other side of boat.
(will be selling 26' alum open trailer in spring, so at least that will be out of the way)..

20260119_164827.jpg


Ordered this kit. Going to make my own harness, and will keep hookup somewhat factory looking
with 7/12 pin bumper mount setup.

 
Any updates or new information on this one? Still amazing?

Nothing of note. I did get the 7/12 pin kit and two 12 pin trailer harnesses'.
But I'm pretty sure I am going to sell this trailer and get the exact same one in 34'.
I want to be able to fit two vehicles.

Will probably put it up here when I'm ready, it's built to fit/handle my 6200 lb pig
(door is 7'3" and 92 wide), so really should fit any other offroad rig.
 
Last edited:
Top Back Refresh