What's new
By:
Filters

Toyota Garage Sale ~ Buy, Sell & Trade thread.

irate4x4.com

CA - Diamond axle for buggy

I no longer need this diamond axle i built for my bomber chassis. Located in perris ca 92570 Local pickup only $3000 67 3/4” WMS with rotors over the hubs Includes caliper mounts for willwood calipers and spidertrax rotors (calipers and rotors not included) 12” pass side pinion offset...
irate4x4.com irate4x4.com

Anyone need a front axle for a toyota based buggy?
 
WTB-Oregon

I really love my 91 4Runner. Have half-heartedly attempted to sell it. It has a tan interior and I need the following pieces.

!. Really nice tan drivers seat.
2. Column surround below the column. With screws.
3. Tan triangle pieces inside the door by the mirror.
4. Dash cover -longshot
5. Other misc. tan interior pieces that are primo I would look at.

I have a cash or trade. Can pick up in person possibly if you are in Oregon / extreme norcal.
 
WTB 84-88 OE (no aftermarket) drivers side, headlight plastic trim / door. Or both sides, or entire grill if necessary. But specifically looking for the black plastic one without the chrome plated plastic around the headlight. Just like the passenger one pictured-
IMG_2471.jpeg



Not interested in the chrome ones, got a few of those….
IMG_2469.jpeg


Got 2nd & 3rd gen parts I can trade, or can just pay cash.

I’m probably dreaming, but figured I’d check and see if any of you guys might have one….
 
All Pro is having a 50% off sale - wheels, axles, gears
 
$100? Sky Off-road pitman adapter and pitman arm. Never used, good shape

78E8151F-8495-4648-BBF1-98CE364519E4.jpeg
 
I was keeping this as an ohmage to my first rig. It's probably the only front end "panel/part" that wasn't damaged in the myriads of rollovers that rig suffered.
First gen, last of the REAL Toyota grilles (round headlights :flipoff2:), no real damage. If you need it to restore, repair a '79 - '83 it's yours. No sense letting it languish on the wall. Not sure I could ship it without it getting damaged, though. SW MO....

rnd hdlght grille.JPG
 
Have everything you'd need to put a crawl box behind your 3.0 r150.

Marlin adapter mc30

Marlin 23sp 2.28 input

Donor case for crawl box (has no outputs)

20240928_175632.jpg
20240928_175640.jpg
20240928_175643.jpg


Also have a rear tcase mount if anyone is interested.

519956dd-e4f2-4057-82e9-f4dfad0f9c72.jpg



$500? Willing to ship if buyer pays.
 
Last edited:
YotaAtieToo said:
Have everything you'd need to put a crawl box behind your 3.0 r150 or anything with a R151F...
Click to expand...

Might help sell it faster... And if someone wants this but with a 21 spline 2.28 input I can throw that at you for shipping (if you don't have one)...
 
Last edited:
YotaAtieToo said:
Have everything you'd need to put a crawl box behind your 3.0 r150.

Marlin adapter

Marlin 23sp 2.28 input

Donor case for crawl box (has no outputs)

20240928_175632.jpg
20240928_175640.jpg
20240928_175643.jpg


Also have a rear tcase mount if anyone is interested.

519956dd-e4f2-4057-82e9-f4dfad0f9c72.jpg



$500? Willing to ship if buyer pays.
Click to expand...

Happen to have the sku number or part number on the adapter?
 
Driver's side rubber brake hose #350-76046 (goes onto caliper). Only fits on 6 lug wheels.
Make El Cheepo offer-
IMG_20240929_173023450.jpg
 
I have a lot of parts taking up space in my garage. Usual mini truck junk. Here is a list of shit I have:
Straight axle calipers. These were blasted and piss canned at one point so there aren’t greasy blobs. I think I have rebuild kits for them.
Straight axle rotors(solid). Someone might be able to use them for a rear disc conversion.
Wheel hubs and spindles.
LROR backing plates eliminators. New.
Front axle rebuild with Koyo knuckle bearings. NO wheel bearings.
Two sets of HD axle seals. One Marlin one TG.
Trail Gear knuckle ball wiper kit.
Rear axle rebuild kit with Koyo wheel bearings
Rear axle drum brake rebuild. Shoes, hardware, bigger wheel cylinders and I believe new adjusters also.
4x4innovations HD t case mount.
2 Trail Gear triple drilled flanges. Don’t remember if the are for the pinion or t case.
Luk clutch with new flywheel for 22R/RE. I might have a new throw out bearing for it also. I am sure that I have more stuff clogging up shelves. Let me know if anyone is interested in anything. I will update this in the next few days. I am located in Las Vegas. Mods please don’t castrate me for not listing prices. :flipoff2:
 
Aisin said:
I have a lot of parts taking up space in my garage. Usual mini truck junk. Here is a list of shit I have:
Straight axle calipers. These were blasted and piss canned at one point so there aren’t greasy blobs. I think I have rebuild kits for them.
Straight axle rotors(solid). Someone might be able to use them for a rear disc conversion.
Wheel hubs and spindles.
LROR backing plates eliminators. New.
Front axle rebuild with Koyo knuckle bearings. NO wheel bearings.
Two sets of HD axle seals. One Marlin one TG.
Trail Gear knuckle ball wiper kit.
Rear axle rebuild kit with Koyo wheel bearings
Rear axle drum brake rebuild. Shoes, hardware, bigger wheel cylinders and I believe new adjusters also.
4x4innovations HD t case mount.
2 Trail Gear triple drilled flanges. Don’t remember if the are for the pinion or t case.
Luk clutch with new flywheel for 22R/RE. I might have a new throw out bearing for it also. I am sure that I have more stuff clogging up shelves. Let me know if anyone is interested in anything. I will update this in the next few days. I am located in Las Vegas. Mods please don’t castrate me for not listing prices. :flipoff2:
Click to expand...
Price for Ball wiper kit, triple-drilled flanges, and t case mount shipped to 95945 please?
 
Wanted:

I'm looking for the frame brackets for the front swaybar on a 1st Gen Tacoma. Don't care about the bushings. Just the bracket and bolts/nuts. Shipped to 37075.

thx
 
Slander said:
I am looking for a power mirror switch for a 1st gen Tacoma.
Click to expand...
Wish I had known this yesterday... I bought a bunch of interior parts from a kid in Kentucky... he had all the electronics...
 
Prepping for a 1uz swap, so I need some parts.

Looking for:

  • 4wd Tail housing off a 96-02 4runner (or similar tacoma) automatic.
  • Chain drive left hand manual t-case (j-shift) that will work on a 96-02 4runner (or similar tacoma)
 
You must log in or register to reply here.
Top Back Refresh