WA SOLD -Tube chassis car, LS/TH400/Atlas, 9" axles - ready to ride - $35,000 SOLD

[Opiebennett]

3 seat tube chassis rock crawler. Can easily made back to a 2 seater if 3 isn’t your style.

*Lm4 (aluminum 5.3). I bought another 5.3 as a spare, can be included in sale

*TH400 with reverse manual valve body and 32 spline output

*atlas 2 transfer case 32 spline outputs, 3.8 low range.

*trail gear housings 5:13 gears, grizzley front, zip rear 4340 shafts (fronts cleared for 50 degrees) ctm u-joints. PSC 10x2.5 ram

* 2.5 radflo air shocks, 12” front, 14” rear

* aluminum bead locks, 39” red label Krawlers

* rear cutting brakes, twin pedal/master cylinders (Wilwood)

*18 gallon goatbuilt tank, uses stock truck fuel pump

*main structure is 1.75/.120 DOM, support stuff is 1.5 with a splash of 1.25 in some spots. Those Guys Rod and Customs chassis. WERock Pro-Mod tech certified.

Cool/capable car, less than 10 trips in it.

Located in Port Orchard, Washington

 

[Opiebennett]

A few more details as requested front one member - that make sense to share.

Wheelbase is 107"
I'd guess the weight is 3500lbs without water or 4000 as it sits (front tires half full).

All link heims (uppers/lowers/trackbars) are 7/8" threads with 3/4" bolt holes, and they all use 3/4" bolts (pics show spacers to get flex). All link tabs are 3/16" material with a 1/8" or 3/16" lamination on both sides TIG welded on around the bolt hole.

The rear seat is intended for a 3 to 6 or 8 year old kid with small legs.

Additional details on the axles -
Front and rear axles are trail gear 9" roller kits. Front has a Yukon grizzley 35 spline locker and 5.13 gears set by Yukon. Rear is a 35 spline Yukon zip locker setup by Yukon.

Branik machine 35 spline shafts Front and rear. Rear double spline shafts with drive slugs. Front branik machine import 4340 35 spline inner and outer shafts and trail gear drive slugs. Trail gear 6 on 5.5 unit bearings at all 4 corners, with trail gear brake hats and rotors and wildwood calipers.

additional photos below -

(Don't mind the extension cord running the trickle charger)

 

[Opiebennett]

 

[Opiebennett]

A few older photos from when we were installing the rear seat and checking with a friend's kid on size and fitment.

Also, I can easily make a flat platform or integrated cooler mount where the rear seat sits if that is desired, and it would be very easy to re-modify the roof back to a 2 seater fastback if that was more desireable.

 

[Opiebennett]

Few more interior shots.

 

[Opiebennett]

SOLD.