Project 41 Dodge “SGT Crawl”

[BFR_Built]

First cage bar going in. Lots of trimming and stuff to get the right setup. These cabs are super tight inside. The B pillar will be outside the back of the cab to allow for seats and headroom.

 

[ridered3]

 

[McBastard79]

Oh Fuck Ya!

 

[Thornbird1]

Hell yes brother

 

[BFR_Built]

Get shit done daily. Haha, my customer said “Are we trying to get this rig to Sema?” Making one side perfect is luck, getting both sides to fit perfect is double luck?

Mega Cage Footplates.

 

[ridered3]

Looks tight which makes it right!

Are you planning to run the hood or bedsides?

 

[BFR_Built]

Looks tight which makes it right!

Are you planning to run the hood or bedsides?

Yea, it will have modified body panels.

 

[BFR_Built]

Yea, it will have modified body panels.

Here are the sheetmetal. We have everything but the bed. But I am making that.

 

[1Sinner]

That's bitchin.

 

[ridered3]

 

[chaplinfj60]

wow super cool.....
love the old skins for a body and i dont think i would paint or fix them up. the old look is in for sure.

 

[BFR_Built]

Break time for a much needed shop clean up.

But I couldn’t resist making progress.

 

[BFR_Built]

I was laid off at work so I guess that means I will be working on more stuff more often.

Clean up the plamsa table and added some Monster.

Did a quick battery install and added a battery a battery switch and remote terminals for easy charger access on this RZR.

 

[ridered3]

Stinks on the job but certainly frees up time for other things.

 

[BFR_Built]

I have been super busy on some customer stuff now that I am taking in stuff.

68 Cab and Chassis that I cut 77” out of to make it 115” wheelbase. I will be making a custom flatbed for it soon.

F100 Prerunner project that is getting a full tube chassis. I am just prepping the cab by cutting out the floor and firewall for the builder.

F150 Prerunner Shock service and spring rate check.

Flatbed trailer repairs.
Replace damaged fender, add steps, add tongue toolbox and relocate and mount tongue jack.

If anyone needs anything cut out and shipped shoot me an email and I see if I can help you out.

[email protected]

 

[ridered3]

Quite the variety of cool projects!

 

[Levigarrett76]

Thanks for sharing

 

[BFR_Built]

Back on the Dodge today.

 

[McBastard79]

Thanks for the update, looks great.

Random questions.. In the 3rd picture above. Did you guys build the storage/holders for the aerosol cans and other chemicals? If you guys didn’t make. Who did?

 

[BFR_Built]

Thanks for the update, looks great.

Random questions.. In the 3rd picture above. Did you guys build the storage/holders for the aerosol cans and other chemicals? If you guys didn’t make. Who did?

I copied this setup from Dirt Lifestyle Nate. Cheap drain pipe cut at a slight angle. Works great. On my setup I used some ABS I had and I cut mine at 30 degree for a bit more angle.

 

[McBastard79]

That is a great idea! I need to figure out something for all my aerosol cans. I’ve got them pilled, stacked in a plastic bin on a shelf. I have rummage through to find what I need at times. Thanks for the close up pic and info. I just might have borrow this idea to get my crap stack organized.

 

[ridered3]

I copied this setup from Dirt Lifestyle Nate. Cheap drain pipe cut at a slight angle. Works great. On my setup I used some ABS I had and I cut mine at 30 degree for a bit more angle.

Always liked his idea for can storage. I'm sure as a former plumber, he had tons of that scrap sitting around too.

 

[BFR_Built]

I hit the road and worked on a cool C10 in Arizona this past weekend.