72blazer
Marion Cobretti
I mistook your description of thin film as slime. If it is sediment, carry on with you filter project.
Ah got you. Sorry for the confusion.
I mistook your description of thin film as slime. If it is sediment, carry on with you filter project.
Well I read up to the "what do i need" bit...
my first though is this...
do you know what softener resign looks Like?
copper color sand.
if you re experiencing this issue from resign fracture clogging the wh throw a y strainer behind the softener, or better yet...
replace the discharge tube in softener.
A whole house filter is just 1 more thing to maintain, the softener should catch all the b.s. And backflush it .
Is the sediment filter a post filter, or is flow right to left?Here is my setup... Installed last month.
I am on a well so the smaller filter is a spin-down sediment filter. Water flow is Left to Right.
Valves have drop ears so they are mounted to the 2x4's. All Pex is 1".
In it about $300 including the Pex tools and all the misc shit that always comes up....
The WS resin looks like coffee grounds; it might be black or brown. OP... Did you charge the WS with resin or did it come with it already charged?
I'm on a well and my water is super clean, but hard. So hard it clogs up coffee makers, shower heads, etc.. I didn't want to go with a salt or potassium based system, so I ordered this, it's highly rated and I can tie it right into my soft water loop. It'll be here tomorrow and I'll install it this weekend. Don't know how long it will take to make a difference, but I'll clean all the shower heads with CLR in an ultrasonic cleaner and see if they stay clean longer.
As far as your manifold goes, if you have one it should be near the water heater or in some sort of dedicated closet. If you don't know if you have one, you probably dont'.
Is the sediment filter a post filter, or is flow right to left?
Aaron Z
Im in the same situation, Im very interested how well that thing works.
Glad to hear I wasn't losing my mind.Nope... I screwed up... Water flow is right to left... original post edited...
Thanks!
Here is my setup... Installed last month.
I am on a well so the smaller filter is a spin-down sediment filter. Water flow is Right to Left.
Sediment has a 50 micron filter, big blue is 5 micron Carbon filter.
Valves have drop ears so they are mounted to the 2x4's. All Pex is 1".
In it about $300 including the Pex tools and all the misc shit that always comes up....