What's new

pbb is my doctor of choice, got some fungal infection type skin rash shit going on

If you can't find a dude you're actively avoiding looking!
well yeah
"maybe later" is an easy copout
Get in the bathtub with a toaster?
:flipoff2:
That's all I got.
small amount of explosives right on the brain stem
can't fuck that up
but you know, I'd sell all my shit first and blow it all on drugs and shit like that well before suicide
maybe learn to drive an airplane, that'd be neat

Looks like pivy.
google says that's some kind of python programming language thing?
Details man, what truck and where? I'm off work and bored
did I get you fired showing up and "stealing shit" on camera?
you're getting a PM, details on truck are... close to possible to google a name and location from
 
Do tell, oh master of homosexual dating.

my current excuse is that my house is a fuckin' mess of a meth shack and I actually live at my mom's
Been married for 33 years, with four kids. I am not the master of dating.
 
Its poisen oak. Scratch it a bit and soak in brakleen. It will sting like hell for about 30 seconed but be all dried up and no longer itching by tommorow
 
From the useless things about your day thread

Pretty ballsy to revive a random ass truck 300 miles away, then load your ride on a trailer and pull it back home. Especially with a half blown up e4od. But I’ve got faith in him. If anyone can jerry rig it until it works out, it’s 486. Even if he ends up towing the f350 home with the damn VW :lmao:
It needed more bits than I originally thought
the starter solenoid (pmgr, not pole-shoe so the solenoid is actually necessary to engage the drive) is paritally open circuited on the ground side of its windings, and I've got another one around here
the front calipers are burnt up and I've got spares here from a D50 that iirc look pretty similar to the 2wd calipers somewhere too
oh and the front brake hoses I bought for my truck, I don't remember if I installed them though

normally around here I'm totally fine with having only one brake circuit working and relying mostly on engine braking, but there's some terrifying hills on the way. By that I mean 6% for maybe 1/4 mile. Absolutely unheard of for my typical driving.

If I hadn't had all the parts I wouldn't feel too bad trying to buy them there at a stupid markup but I will drive 6hr to avoid buying parts I already have on the shelf.
 
did I get you fired showing up and "stealing shit" on camera?
you're getting a PM, details on truck are... close to possible to google a name and location from
Unfortunately no, no I did not. If you need more questionable paint and free Ibc totes lemme know. I may get a thanks if I get rid of enough of them.
 
you know, I think I've got a shitton of sumac in my yard

wasn't even thinking about that, I did run the riding mower through some woodier areas at the same time as this showed up
 
For soap, I use this shit every time after I mow.


I also used to be able to roll in it without issue. No I get it if I don't wash after touching it. My chick just looks at it and gets covered LOL....
 
you know, I think I've got a shitton of sumac in my yard

wasn't even thinking about that, I did run the riding mower through some woodier areas at the same time as this showed up
PM me your address and I'll send you some poision ivy soap from Amazon. Or just go get some yourself:flipoff2::idea:
 
It needed more bits than I originally thought
the starter solenoid (pmgr, not pole-shoe so the solenoid is actually necessary to engage the drive) is paritally open circuited on the ground side of its windings, and I've got another one around here
That sounds like the starter on my 04 f150. You can make it spin by jumping the goddam thing with a screwdriver, but it doesn't matter because it won't engage the gear without the actual solenoid working.

For a couple winters I was carrying a spare starter in the bush and 3 feet of fucking ratched extension to change it.

Stupid fucking fucking fucking engineers and beancounters and fuck everyone else that thought that was a good idea.
 
That sounds like the starter on my 04 f150. You can make it spin by jumping the goddam thing with a screwdriver, but it doesn't matter because it won't engage the gear without the actual solenoid working.

For a couple winters I was carrying a spare starter in the bush and 3 feet of fucking ratched extension to change it.

Stupid fucking fucking fucking engineers and beancounters and fuck everyone else that thought that was a good idea.
yeah, usually the problem is that the magnet wires get de-soldered from the steel stud terminal for the solenoid wire, rust jacking just lifts the lead right off the steel.
my solution is to make up a spade terminal pigtail, you strip like an inch of wire and feed it through an uninsulated ring terminal, so you can solder the wire directly to the solder blob on the solenoid and use the ring terminal for strain relief. Blob over the whole mess with RTV so nobody tries to disconnect it from the solenoid in the normal way

at least this one's easy to get out being old, and I've got a spare on the shelf
 
Looks like poison oak or similar to me. especially if it leaves redness/new sores anywhere you scratch.
Wash hands very well with mild soap and water. I think cold water if I remember correctly. You are spreading oils and causing new break outs. Get some prednisone...I have a friend that had some extra. take 1 little pill a day for about 5 days. Do not scratch, opening the sores will allow for infections.

pro tip, get it on your junk and have the ole lady enjoy the perma chub and longer sex. Assuming she is immune of course. Do not get it on the sack. It itches so bad, and you will want to pull your ball sack until it feels like it is ripping.

I have a funny story behind this experience.
 
I get reactions all of the time to shit in the yard. The number one thing is getting the oils off. I take a rag soaked in brake cleaner and scrub until it hurts too much. Sometimes I have to do it again the next day, but then it starts to clear up. That method has worked better then anything I've ever tried, and I've tried all of the over the counter stuff.

Also wash your sheets
 
Do not scratch, opening the sores will allow for infections.
This is not true actually. The fluid from the blisters does not spread it. The reason people think that is they haven't gotten the oils off that caused the blisters to begin with. So when they scratch it spreads.

Edit, I read your post wrong. You are right, it could cause infections
 
This is not true actually. The fluid from the blisters does not spread it. The reason people think that is they haven't gotten the oils off that caused the blisters to begin with. So when they scratch it spreads.

Edit, I read your post wrong. You are right, it could cause infections
Dork.
 
pro tip, get it on your junk and have the ole lady enjoy the perma chub and longer sex. Assuming she is immune of course. Do not get it on the sack. It itches so bad, and you will want to pull your ball sack until it feels like it is ripping.

I have a funny story behind this experience.
yeah I got some on my dick
kind of interesting that the scratching of the itchy from jerking off feels better than jerking off usually does
 
yeah I got some on my dick
kind of interesting that the scratching of the itchy from jerking off feels better than jerking off usually does
LOL, when I got itchy junk bangin the old lady took on a whole new twist. Not sure which was better, itching my dick or nailing her.
 
so, maybe about a week ago I was wrestling with some really moldy and wet pallets to get them piled up to burn, pretty sure that's where I got this shit
first pic doesn't really show the blisters on the hands too good, and other pics are a couple days later

seems to make blisters that eventually pop and scar over
everywhere I normally scratch at because it feels good has gotten a rash with some swelling but no blisters yet

I've been hitting it with Clotrimazole cream and it seems to calm it down and slow the spread, everywhere says that should take like 4 weeks to make it go away though, and I'm almost out of it after only a couple days
I've also got some Terbinafine cream that I'm thinking I'll use once the first stuff runs out, dunno both seem to be pretty general antifungals

I've also got some nystatin yeast infection stuff, and the internet seems to say that that is only really good for yeast infection stuff and not mold
I suppose it could be some sort of yeast, those pallets were all sorts of nasty and slimy
Guess I could try putting it on one region of the rash and see if it does better than the clotrimazole stuff has been. Internet sources seem to say that it's the real nasty stuff and you should be more careful using it than the clotrimazole I've been using, but they also seem to hate on isopropyl alcohol and that seemed to be working pretty okay (though it just evaporates instantly so I was having trouble keeping stuff wet with it)

Guess the question is, any of you got some idea what the fuck's growing on me?
Thats just poison ivy.

Rip the blisters open with your teef and smear the juice on your lips..


OK, dont do that, youll wind up in hospice.
 
Was there any poison ivy on the pallets? That shit can hang around for a while. If you inhale the smoke form it, that will fuck you up too.
This.


At a lake we camped at when I was a kid (Heaven on earth) a bunch of family's from philly rented spots near us (You rent a lot year after year and build on it) and they cleared and burned about two acres of weeds.

My dad told them not to burn the weeds and that they had already for poison ivy and should use this soap we had(Clear brown lye soap, I forget the name) and wash off in the lake.

After that weekend we didnt see them for two weeks and when they showed up they were a fucking mess!

Two of the five guys wound up in the hospital with poison ivy in their throats and lungs and the rest looked like Frankenstein with scars and scratches all over.


Every single one of them wanted my dad to teach them about what to look out for and where to buy some of that soap.
 
I’ve had good luck with running as hot of water as I can stand over the blisters. Then putting some type of poison ivy specific medicine like ivarest on it.
 
I had to pull a 486 on a Ford starter a few weeks ago. I had the same problem spin but not engaging. Took the solenoid apart and flipped the stud 180 that engage the starter and the drive at the same time. Works like a champ now. I thought of 486 when I did it. 20 year old skid steer blocking the driveway in the dark working on a tailgate.
 
itty bitty baby
size of a nickel
musta been last year's crop that got me when I was mowing this area, it was all 3' high brush that I was smashing the riding mower through

20210417_115825.jpeg
 
got a paved county road out front, have to see if there's something like that around here
otherwise I'll just go to the co-op and see what they've got
 
got a paved county road out front, have to see if there's something like that around here
otherwise I'll just go to the co-op and see what they've got
Stop over thinking it. Plant more of it on your county road and then throw some scrap metal out there in the middle of it with a add for free scrap. Film it ad post it up for our enjoyment.
 
okie dokie
the shit on my hand and forearm came back
within a half inch of the same spots in the pictures on the OP

thinking now that its some kinda herpes?
internet says that it's there forever now and it'll come back from time to time, also that it'll spread which fucking sucks

can I kill it with a soldering iron? I can't get a straight answer on that anywhere, fucking lawyers have pared down the available answers to "see a GP" and "see your general practitioner"
 
okie dokie
the shit on my hand and forearm came back
within a half inch of the same spots in the pictures on the OP

thinking now that its some kinda herpes?
internet says that it's there forever now and it'll come back from time to time, also that it'll spread which fucking sucks

can I kill it with a soldering iron? I can't get a straight answer on that anywhere, fucking lawyers have pared down the available answers to "see a GP" and "see your general practitioner"
If you are thinking about using a soldering iron on it you need to go to the doctor. Maybe try cortisone cream or an anti-fungal. No soldering iron.
 
If you are thinking about using a soldering iron on it you need to go to the doctor. Maybe try cortisone cream or an anti-fungal. No soldering iron.
fuck the doctor, they'll just tell me to take ibuprofin and put a bandaid on it for $400
 
Top Back Refresh