Old commando wiring

[Cowboy63b]

I have two things going on, one is a 1968ish Jeepster with the 225 odd fire, the other is my ‘73 Commando that was originally 4.2/auto.


I need a schematic for both of them. I have a FSM for the 68’, but, it’s just a diagram, and leaves quite a bit to be desired. I’m trying to do a Howell FI conversion on the 68’ and have some knowledge on the wiring, but, the Kaiser stuff is wonky and there’s no real rhyme to much of anything.


I would also need help with the ‘73 as well. It should be similar to a CJ, and I have a Jeep FSM from 74, and that should get me pretty close.


Everything I’m pulling using my googlefu is generic and bleh.

Can anyone help?

 

[Winchested]

Howell FI is GM tbi based? It's a standalone harness no?

 

[1Sinner]

Everything I read said fuel injection is a no go on an oddfire. I have one, and I looked for quite some time.

 

[Bebop]

Everything I read said fuel injection is a no go on an oddfire. I have one, and I looked for quite some time.

Installing Holley Sniper EFI on a daunting, odd-fire V-6: Part 1 - Hagerty Media

Craig Fitzgerald begins the story of his DIY EFI endeavors on a Jeep Dauntless V-6 engine, and how the installation unfolded.

www.hagerty.com

 

[1Sinner]

That's pretty awesome. It has been a couple years since I dug into it.