Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
*** Meme + words ***
- Thread starter Yota Up
- Start date
![[486]](https://data.irate4x4.com/avatars/m/0/94.jpg?1700178133){kind=avatar}
[486]
ugh, that guy again?
[486]
ugh, that guy again?
Gosh, I'm such an asparagus.
Also, this is not the right way to fill a spinning reel. Filling a spinning reel this way causes line twist, you will get curly q's in your line when you cast. This contraption is perfect for filling a round or conventional reel.Some people put too much time into dumb ideas that won't work.
...because no tension on the line while spooling.
The spool needs to be 90* to the spinning reel, and match the direction of the spinning reel rotation to the direction the line comes off the spool.
Get rid of the crank and weld a socket.F you tireshop. We don't need you no more.
Last edited:
Yota Up
Dull man
- Joined
- May 20, 2020
- Member Number
- 648
- Messages
- 1,616
I always use a drill on all scissor jacks. Can't believe they spent the time to do all that and end up caveman with the tool it came with.Get ride of the crank and weld a socket.
In other news," independent suspension sucks....errr, wait a minute"
Looks more like a roadmap.A few recipes from the news.
if I go too fast I spill my beer, and I can't think that fast.I always use a drill on all scissor jacks. Can't believe they spent the time to do all that and end up caveman with the tool it came with.
In other news," independent suspension sucks....errr, wait a minute"
In other news," independent suspension sucks....errr, wait a minute"
Seriously? That’s almost a 10 year old build from proformance… be cool and post the new flat pack buggy’s they have been building on the same concept. Or even better, the their older and angrier mascot.
Do you like broken backs? Cause that's how you get a broken back. Negative ground clearance is never good. I'm not sure that thing ever entered a race.I always use a drill on all scissor jacks. Can't believe they spent the time to do all that and end up caveman with the tool it came with.
In other news," independent suspension sucks....errr, wait a minute"
He's entered a few races in Australia, I can't remember what he's placed in them. Truck has alot of one off custom parts like a custom Quick change tcase. Neat stuff.
Arps
Well-known member
[486]
ugh, that guy again?
have to fork a tote full of shit on the back of the truck to get enough weight thoughF you tireshop. We don't need you no more.
[486]
ugh, that guy again?
Oops! We ran into some problems.
You must wait at least 7 seconds before performing this action.
Penetrode Offroad
Red Skull Member
- Joined
- May 20, 2020
- Member Number
- 493
- Messages
- 545
Did you break your back on this ride?
[486]
ugh, that guy again?
gladman
Aroused by Ta Ta's
- Joined
- Jun 18, 2020
- Member Number
- 2107
- Messages
- 1,018
chloroform you say..... hmmmmmmA few recipes from the news.
[486]
ugh, that guy again?
I recall it being ether and bleach, not alcohol
The hub is on a taper to the axle shaft.I have no clue who these people are, but they sure put a ton of time and effort into certain things.
Yota Up
Dull man
- Joined
- May 20, 2020
- Member Number
- 648
- Messages
- 1,616
Pretty slick how he built that contraption, though. Took some effort with the chains and anchors and all.
I would have just grabbed another wheel and chains instead.
I'm thinking that he's planning on doing a couple of these.Pretty slick how he built that contraption, though. Took some effort with the chains and anchors and all.
I would have just grabbed another wheel and chains instead.
I need to see more6 wheeler?
