arse_sidewards
Red Skull Member
- Joined
- May 19, 2020
- Member Number
- 71
- Messages
- 8,556
Varies by engine. Search FTE and or FSB. I've only memorized the one for the 300 which is 800K6Would you happen to have a part number for said shorter belt?
Varies by engine. Search FTE and or FSB. I've only memorized the one for the 300 which is 800K6Would you happen to have a part number for said shorter belt?
Really?It also depends on which tensioner set up you have
Not sure about the 5.0s. but when I deleted the smog pump on my 351, there was two different accessories brackets that had the tensioner in different spots. The opposite one that I had was better for bypassing the pulleyReally?
'94 XL 5.0L with A/C🤷♂️
For simplicity; what would happen if I just remove that filter and hose from the pump?It's the air filter for the smog pump. Throw it away and run a shorter belt that bypasses the pump if you haven't already. (Unless you live in CA or some other shithole that's doing visual inspections on 30yo trucks).
1) So putting a small cone filter would be better than nothing/and cheap way to make space on the wheel well?If you remove the filter the pump will eventually ingest enough crap to seize and then you'll throw a belt.
No, the system won't care if you use a more modern vacuum reservoir. Frankly it won't care if you don't run one at all.
For clarity; My Bronco is an '94 5.0L MAF.It's a 92 EEC-IV ford, you need vacuum for HVAC and booster. Cap and throw everything else away.
For clarity; My Bronco is an '94 5.0L MAF.
Your last point:
Are you referring to both the smog pump air filter and vacuum canister?
Yes.
I'm not looking at one at the moment, but if IIRC... the canister is for evap. you'll probably need vacuum for FPR, couple other engine functions.
The canister is just a vac reservoir. He doesn't "need" it for anything unless the difference between 1.5 and 1.75 full presses of the brake or cycling between dash and defrost vents ten times after the engine stalls means a lot to him.Yes.
the canister is for evap. you'll probably need vacuum for FPR, couple other engine functions.
You need to look at the vacuum diagram and actually think about it. But yes, you'll probably either wind up capping them or just straight deleting a couple lines and connecting others.Ok; pull the vacuum tubes and cap them?✔️
Yes. Or just remove the pump entirely and run the shorter belt.Pull the long smog pump hose and air filter and cap the pump fitting with a small cone air filter?✔️
I wouldn’t worry about it arriving damaged, if it is Amazon will drop you another one without question.SHOULD I BUY FROM AMAZON?
If it ships straight from Odyssey, then I will.
How was your Odyssey battery packed; with a strong box?
Was it even packed?😬
That's what I'm mainly concerned with ordering from Amazon: crappy packing where it arrives damaged.
Thats been my feelings the last 10 years. Im disappointed in every expensive batterey when it finally dies.... but when my $60 everstart dies im only disappointed till I pull it out and read the date code is actually 5 years old.Get the everstart . There is zero reason to run anything more in a daily . Walmarts warranty is better than the expensive ones also more than likely .