Rooster831
RIP 4/22
- Joined
- May 19, 2020
- Member Number
- 251
- Messages
- 101
Anyone modify/upgrade their steering links on a 94-02 Dodge 2500/3500? Been wondering if I can drill out the knuckles and pitman arm to accept a 7/8" heim with a 3/4" bolt. Tie rod on bottom, drag link on top single shear.
Has a Redhead steering box and aftermarket track bar, Main concern is the added length of the drag link wont match the angle/length of the track bar and cause bump steer.
I wouldn't mind building a new track bar and mounts with heims aswell if that's an issue Ill run into.
Also considering just getting the 09+ T link style steering setup Ive heard its a great upgrade.
Any input/opinions on this?
Has a Redhead steering box and aftermarket track bar, Main concern is the added length of the drag link wont match the angle/length of the track bar and cause bump steer.
I wouldn't mind building a new track bar and mounts with heims aswell if that's an issue Ill run into.
Also considering just getting the 09+ T link style steering setup Ive heard its a great upgrade.
Any input/opinions on this?