-
Last Call Guest on these Group Buy Deal Items from Baja Designs
Ghetto fab / Hack fab
- Thread starter Blugreenformula
- Start date
350TacoZilla
Well-known member
Rear Leaf Springs | 2.5" Lift | Pair | International Scout II 4WD (1971-1980)
Rear Leaf Springs | 2.5" Lift | Pair | International Scout II 4WD (1971-1980)
also they are 2.5 wide but 90s S10's are a 54" leaf. Might be able to grab a main leaf and thin it down. Long end is about .25" off yours so don't know if that would hurt you or you could do a small zero rate.
Winchested
IH Scout SSII
Still living that poor life!Links?
Winchested
IH Scout SSII
IHPA says them 2.5s and 2" lift springs are going to be too tall and I don't want to pull leaves as the ass end of my scout is way over the original 1200 lb spring capacity, that's why I added extra leaves (removed the giant overload though)Rear Leaf Springs | 2.5" Lift | Pair | International Scout II 4WD (1971-1980)
Rear Leaf Springs | 2.5" Lift | Pair | International Scout II 4WD (1971-1980)www.roughcountry.com
also they are 2.5 wide but 90s S10's are a 54" leaf. Might be able to grab a main leaf and thin it down. Long end is about .25" off yours so don't know if that would hurt you or you could do a small zero rate.
total newb
senior jerk ass
JohnnyJ
Low Range Drifter
I've heard of people stacking body lift pucks and suspension blocks; but this is the first I've seen stacking IFS lifts. Bravo!
arse_sidewards
Well-known member
- Joined
- May 19, 2020
- Member Number
- 71
- Messages
- 10,754
Don't forget the knuckles.
rockota
white collar hillbilly
- Joined
- May 28, 2020
- Member Number
- 1642
- Messages
- 3,835
Seen it a few times on FBMP… apparently “stacked” is way more common than it should be
WaterH
Well-known member
Fine for something that never gets driven. I think some of those trucks should get pulled over, but don’t. That one would definitely get pulled over.
350TacoZilla
Well-known member
Usually see that on the squatting trucks but I did actually see a truck fully lifted like that. Had drop shackle mounts, arched springs and blocks with maybe 2 chromed 6" drop cradles up front. "Show truck "
subybaja
E. Spengler
Nice. Whoever put all that stuff on the door, so it flops 150 30ga wires back and forth forever...
dnsfailure
WHAT GEAR ARE YOU IN?
I did something similar in my TJ. The windshield washer pump wasn't getting triggered by the column stalk anymore, couldn't figure it out so I said, **** it, and just put a switch on the dash and ran new wires
My buddy bought a ****box Ford Ranger that had the windshield washer on a toggle. Year later we stripped it down and were running it through the woods. He wanted to kick out the windshield like in the movies, and found out how unrealistic that is. After that we stopped for a piss break or something and I walked over and clicked that washer switch on. When he got back in, hit the key, he got a face full of washer fluid. We all laughed like hell.I did something similar in my TJ. The windshield washer pump wasn't getting triggered by the column stalk anymore, couldn't figure it out so I said, **** it, and just put a switch on the dash and ran new wires
SHARPMACHINE
Web Wheeler
^^^^^^^
dnsfailure
WHAT GEAR ARE YOU IN?
I made mine a momentary switch, but that's ****ing funny! Like putting a rubber band on the sink sprayer
Lol I forgot about that oneI made mine a momentary switch, but that's ****ing funny! Like putting a rubber band on the sink sprayer
dnsfailure
WHAT GEAR ARE YOU IN?
it's one of the classicsLol I forgot about that one
I made mine a momentary switch, but that's ****ing funny! Like putting a rubber band on the sink sprayer
My stepmom didn't think that this was funny.Lol I forgot about that one
Years later, my girlfriend's father did not think that this was funny.
dnsfailure
WHAT GEAR ARE YOU IN?
Yes they were.yeah, we'll they are wrong
