Toyota Garage Sale ~ Buy, Sell & Trade thread.

FJ80 carrier, R&P, factory 4.10 HP gear set. Shoot me an offer.

IMG_4816.jpeg
IMG_4817.jpeg
IMG_4818.jpeg
IMG_4819.jpeg
IMG_4820.jpeg
 
FrankenToy said:
Nice try. I'm not sure what shipping would be but it's likely more than $25. You can have 'em if you want 'em, but you gotta pay to ship.
Click to expand...
I lowballed you just to make the first move.

I want them, $25 plus shipping is cool too.
Let me know :flipoff2:
 
rugburn said:
I lowballed you just to make the first move.

I want them, $25 plus shipping is cool too.
Let me know :flipoff2:
Click to expand...
A quick estimate for UPS flat rate ground shipping for less than 50 lbs and a 10" x 10' x 10" box (1000 cubic inches) shipped to Gary, Indiana :flipoff2: shows ~$30. PM me your zip code if you DON'T live in Gary for a slightly more accurate shipping estimate. How quickly do you want them? I gotta find a box that size. You can then Venmo or Paypal me the estimated cost of shipping (+ any gratuity :flipoff2:) and I will ship...
 
Pat said:
Super nice set of toyota buckets.
In Oroville Ca

$550
20241222_095038.jpg
20241222_094900.jpg
20241222_094944.jpg
:usa::usa: came out of 2nd gen 4runner I believe

:usa::usa::usa:

:usa::usa::usa:
:usa::usa::usa:

:usa::usa::usa:
:usa::usa::usa:
:usa::usa:
Click to expand...

Dang. Those are clean!

I’ve been carrying around a set from an 87 4Runner for almost 30 years now. Can’t seem to let them go.
 
ISO OEM gear driven Tcase Bolts

Removed a Tcase ebrake setup and am looking to get the 5 OEM bolts im missing for the rear output cover. I have regular ones to replace im just being picky :grinpimp:

Couple pics of where the bolts are missing from and bolt im looking for, Thanks
 

Attachments

  • IMG_8266.jpeg
    IMG_8266.jpeg
    2.1 MB · Views: 48
  • IMG_8221.jpeg
    IMG_8221.jpeg
    2.7 MB · Views: 43
mdogg said:
ISO OEM gear driven Tcase Bolts

Removed a Tcase ebrake setup and am looking to get the 5 OEM bolts im missing for the rear output cover. I have regular ones to replace im just being picky :grinpimp:

Couple pics of where the bolts are missing from and bolt im looking for, Thanks
Click to expand...

Can you provide a measurement in length? I probably have them in my shed. Just need to remember to look.






Anyone have a rear driveshaft disconnect they want to sell? Random request, figured I’d ask.
 
I have a brand new one I ordered without realizing it wouldn't work on 30 spline and has been sitting in my garage since.
 

Attachments

  • 1000004638.jpg
    1000004638.jpg
    1.8 MB · Views: 42
FleshEater said:
Can you provide a measurement in length? I probably have them in my shed. Just need to remember to look.






Anyone have a rear driveshaft disconnect they want to sell? Random request, figured I’d ask.
Click to expand...


I think I found some locally, thanks though!


I have also been looking for a manual rear disconnect, toyota stuff is getting harder to find.
 
Looking for some pinion shims for a 9.5" diff. I need to replace some pinion bearings and don't have much left over from when I initially set them up and don't need a full install kit.
 
Slander said:
Looking for some pinion shims for a 9.5" diff. I need to replace some pinion bearings and don't have much left over from when I initially set them up and don't need a full install kit.
Click to expand...
I have a ****load of shims leftover from different install kits. Give me the inside and outside measurements and I'll look on Monday.
 
Anybody interested? This is all unused hose from the TG 22RE full hydro kit. I tried to make any of them work for my buggy but no dice.

Sell them cheap if you need trail spares.

IMG_5090.jpeg
 
Update: located one and purchased

Wanted: oil pickup tube

Any of you that have SAS'd a taco/4runner/etc.. If you have your front sump oil pickup laying in a parts drawer or garbage pile and want to sell it, let me know. I just need something I can chop up for a custom oil pan I am building.
 
Last edited:
vegask said:
Wanted: oil pickup tube

Any of you that have SAS'd a taco/4runner/etc.. If you have your front sump oil pickup laying in a parts drawer or garbage pile and want to sell it, let me know. I just need something I can chop up for a custom oil pan I am building.
Click to expand...
What engine?
 
Wanted: '96 Tacoma....driver side filler plate below the headlamp...mine is somewhere on I-5 between here and Sacramento...:laughing:
Dont care about color.
 
Still looking for for rear axle shafts for 03 Taco prerunner with electric locker, shafts are 28.25" OAL.
No ABS reluctor rings.
Was told Dorman makes some, but haven't found any.
Was also told same years 4runner will work.

Salvage yard problem is guys pull shafts and toss to get the locker, then they don't know what axle went to what.
 
4runner said:
Still looking for for rear axle shafts for 03 Taco prerunner with electric locker, shafts are 28.25" OAL.
No ABS reluctor rings.
Was told Dorman makes some, but haven't found any.
Was also told same years 4runner will work.

Salvage yard problem is guys pull shafts and toss to get the locker, then they don't know what axle went to what.
Click to expand...
Sounds like your yard sucks. Mine does not let you touch axles. They get pulled immediately and put on racks. You buy the entire axle or nothing.
 
FrankenToy said:
I would question just whose yard sucks harder...
Click to expand...
Not really. Just a yard owner with more than 2 brain cells. Nobody that owns a recycling yard wants to sell a single axle shaft while the rest of the axle goes to scrap because it’s now useless. Open rear axles go for $200. Axles with E lockers go for $650 depending on axle.
 
Last edited:
  • Like
Reactions: DMG
You must log in or register to reply here.

Similar Threads

SXS / UTV Garage Sale Buy, Sell / Trade
Replies
3
Views
197
jhama78
jhama78
SXS Garage Sale ~ Buy, Sell, and Trade Thread
Replies
7
Views
1K
YJ4Rox
Do we have a buy sell trade thread for OSR?
Replies
4
Views
693
Steve300xcw
Top Back Refresh