-
Last Call Guest on these Group Buy Deal Items from Baja Designs
-
-
In-cre-MENTAL progress. Yanked off the fenders in prep for tubing the front. Started mounting the winch. I have just enough room... -
csutton7 reacted to D_JEEPER's post in the thread Build Project Iron III Oxide: A Snowball Effect with
Like.
Well I built up the courage to put some gas in the tank tonight and guess what. She fired right up! I only let it run for a few seconds... -
csutton7 replied to the thread Build Family Size Rat crawler.I like that, very smart with the leather--looks way less complicated than what I did.
-
csutton7 I like how yours are recessed. I used a leather strap for the outside handle because it is easily replaceable, flexible and...
-
csutton7 reacted to D_JEEPER's post in the thread Build Project Iron III Oxide: A Snowball Effect with Like.
Took a few minutes to make some labels for the switches :grinpimp:
-
csutton7 replied to the thread Build Family Size Rat crawler.https://irate4x4.com/attachments/img_2436-jpeg.1052612/ I did the bear claw latches and CJ/YJ handles on my build, what are you using?
-
csutton7 reacted to D_JEEPER's post in the thread Build Project Iron III Oxide: A Snowball Effect with Like.
Woo, finally got this stupid OD switch mystery solved :emb: So yeah, OD switch wire touches ground to signal OD OFF, and the OD lamp...
-
csutton7 reacted to D_JEEPER's post in the thread Build Project Iron III Oxide: A Snowball Effect with Like.
OK, got off the phone with Chris at Hotwire Auto. Turns out with the OD Off switch, the Orange OD Switch wire gets toggled to ground...
-
I've been working on other things since. Until fate stepped in, and I have a new urgency to finish this. So... beomes this...
-
Dang, it has been a minute. I've been focused on other things, but I recently have come back to this. The following is from late...
-
Worked on rear coilover placement... Need to cut the frame/ bumper/ thing off - there's way too much leftover cobbled together garbage...
-
It may come to that, but currently there's enough hose to allow movement. And finding an appropriate position that doesn't interfere...
-
Make a tab for the resi directly on the engine. let it move with the engine vs it being on the chassis.
-
Sitting on the springs. Starting at 200/300. I have 5.5" shaft showing with the preload adjuster nearly all the way up the shock...
-
Radiator is "fully" mounted- plus I incorporated a mounting tab for my PSC ressy in the radiator support. All tucked in nice and tidy...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…