Who make good aluminum hose separators that mount on 1.75" tube?

[gt1guy]

I've seen them before and I'm not finding shit now. Looking for a aluminum mount for a 1.75" UCA the will hold 2 hydro steering hoses and 2 1/4" lines (for the front).
Ans also one that will hold just 2 1/4" lines (for the rear) also for 1.75" UCA.

 

[1Sinner]

I've seen them before and I'm not finding shit now. Looking for a aluminum mount for a 1.75" UCA the will hold 2 hydro steering hoses and 2 1/4" lines (for the front).
Ans also one that will hold just 2 1/4" lines (for the rear) also for 1.75" UCA.

What about using quick release stage clamps to mount to the tube

and then mount aluminum hose clamps to the stage clamps for easy servicing?

Use the lightning truss clamps description for different styles on Amazon

 

[NDCjeepsmith]

Gotta be alum? If not Liquid Iron Industries has these that are nice.

HoseMaster Dual Tubing Mount Kit

HoseMaster Dual Tubing Mount Kit Product Description: Streamline your setup with the HoseMaster Dual Tubing Mount Kit, expertly engineered to secure two hoses to your 1.5" or 1.75" tubing with precision and ease. Ideal for hydraulic steering, fuel systems, vent lines, and more, this mount keeps...

www.liquidironindustries.com

 

[TTRAxle&FAB]

AJK offroad makes brake and hydro combo clamps for links. Billet aluminum.

 

[gt1guy]

What about using quick release stage clamps to mount to the tube

and then mount aluminum hose clamps to the stage clamps for easy servicing?

Use the lightning truss clamps description for different styles on Amazon

Oh hell no. While I bet that could work, I just know I want to end up using those bottom ones everywhere and I'd end up with 5k spent in damn hose clamps. Unfortunately I do know how stupid I am.

Gotta be alum? If not Liquid Iron Industries has these that are nice.

HoseMaster Dual Tubing Mount Kit

HoseMaster Dual Tubing Mount Kit Product Description: Streamline your setup with the HoseMaster Dual Tubing Mount Kit, expertly engineered to secure two hoses to your 1.5" or 1.75" tubing with precision and ease. Ideal for hydraulic steering, fuel systems, vent lines, and more, this mount keeps...

www.liquidironindustries.com

I did find something similar on the Poly website. I ordered a few as the were only $2.50 a piece.

AJK offroad makes brake and hydro combo clamps for links. Billet aluminum.

I believe those are what I had seen in the past. Couldn't find them this go round. But I was thinking they were more rounded where the hoses fit in....not on a straight line.

Now the more I think about it. I could probable get away with one of the AJK at each end of the links where clearance isn't an issue. And either the Poly ones I bought or simply some zip-ties in the middle where things get tight. At full bump the uppers come really close to the engine mounts and the headers. In articulation the uppers and lowers get pretty tight together.

I also thought about running a couple of the lines over to the passenger side upper, but there's no way to get them there without going directly over the headers and there isn't much clearance. I gave up on that thought.


Went ahead and ordered 4 of the AJK clamps with the blank portion so I can drill 4 holes..................hopefully.

 

[mobil1syn]

Billet Bulkhead Mounts

These billet bulkhead mounts are perfect for securing brake lines and differential breather lines to chassis tubes and suspension links. Designed to fit around 1.75" or 2" tubes. These brackets feature a 3/8" hole to accommodate a #3 (3/16") bulkhead fitting, and a 3/4" hole for a #8 breather...

eversenperformanceproducts.com